Commit 539c320b authored by Gustavo Padovan's avatar Gustavo Padovan Committed by Eric Anholt

drm/vc4: update cursors asynchronously through atomic

Add support for async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
vc4_update_plane() did but through atomic.

v7: Place the drm_atomic_set_fb_for_plane() call after the new
    FB has been applied to the HW to avoid possible use-after-free
    issues
v6: add missing drm_atomic_set_fb_for_plane() in
    vc4_plane_atomic_async_update() (Boris Brezillon)
v5: add missing call to vc4_plane_atomic_check() (Eric Anholt)
v4: add drm_atomic_helper_async() commit (Eric Anholt)
v3: move size checks back to drivers (Ville Syrjälä)
v2: move fb setting to core and use new state (Eric Anholt)
Signed-off-by: default avatarGustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: default avatarEric Anholt <eric@anholt.net>
Signed-off-by: default avatarEric Anholt <eric@anholt.net>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330085445.31726-1-boris.brezillon@bootlin.com
parent 79271807
......@@ -90,6 +90,26 @@ static int vc4_atomic_commit(struct drm_device *dev,
struct vc4_dev *vc4 = to_vc4_dev(dev);
int ret;
if (state->async_update) {
ret = down_interruptible(&vc4->async_modeset);
if (ret)
return ret;
ret = drm_atomic_helper_prepare_planes(dev, state);
if (ret) {
up(&vc4->async_modeset);
return ret;
}
drm_atomic_helper_async_commit(dev, state);
drm_atomic_helper_cleanup_planes(dev, state);
up(&vc4->async_modeset);
return 0;
}
ret = drm_atomic_helper_setup_commit(state, nonblock);
if (ret)
return ret;
......
......@@ -741,6 +741,57 @@ void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
vc4_state->dlist[vc4_state->ptr0_offset] = addr;
}
static void vc4_plane_atomic_async_update(struct drm_plane *plane,
struct drm_plane_state *state)
{
struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
if (plane->state->fb != state->fb) {
vc4_plane_async_set_fb(plane, state->fb);
drm_atomic_set_fb_for_plane(plane->state, state->fb);
}
/* Set the cursor's position on the screen. This is the
* expected change from the drm_mode_cursor_universal()
* helper.
*/
plane->state->crtc_x = state->crtc_x;
plane->state->crtc_y = state->crtc_y;
/* Allow changing the start position within the cursor BO, if
* that matters.
*/
plane->state->src_x = state->src_x;
plane->state->src_y = state->src_y;
/* Update the display list based on the new crtc_x/y. */
vc4_plane_atomic_check(plane, plane->state);
/* Note that we can't just call vc4_plane_write_dlist()
* because that would smash the context data that the HVS is
* currently using.
*/
writel(vc4_state->dlist[vc4_state->pos0_offset],
&vc4_state->hw_dlist[vc4_state->pos0_offset]);
writel(vc4_state->dlist[vc4_state->pos2_offset],
&vc4_state->hw_dlist[vc4_state->pos2_offset]);
writel(vc4_state->dlist[vc4_state->ptr0_offset],
&vc4_state->hw_dlist[vc4_state->ptr0_offset]);
}
static int vc4_plane_atomic_async_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
/* No configuring new scaling in the fast path. */
if (plane->state->crtc_w != state->crtc_w ||
plane->state->crtc_h != state->crtc_h ||
plane->state->src_w != state->src_w ||
plane->state->src_h != state->src_h)
return -EINVAL;
return 0;
}
static int vc4_prepare_fb(struct drm_plane *plane,
struct drm_plane_state *state)
{
......@@ -780,6 +831,8 @@ static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
.atomic_update = vc4_plane_atomic_update,
.prepare_fb = vc4_prepare_fb,
.cleanup_fb = vc4_cleanup_fb,
.atomic_async_check = vc4_plane_atomic_async_check,
.atomic_async_update = vc4_plane_atomic_async_update,
};
static void vc4_plane_destroy(struct drm_plane *plane)
......@@ -788,82 +841,6 @@ static void vc4_plane_destroy(struct drm_plane *plane)
drm_plane_cleanup(plane);
}
/* Implements immediate (non-vblank-synced) updates of the cursor
* position, or falls back to the atomic helper otherwise.
*/
static int
vc4_update_plane(struct drm_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_plane_state *plane_state;
struct vc4_plane_state *vc4_state;
if (plane != crtc->cursor)
goto out;
plane_state = plane->state;
vc4_state = to_vc4_plane_state(plane_state);
if (!plane_state)
goto out;
/* No configuring new scaling in the fast path. */
if (crtc_w != plane_state->crtc_w ||
crtc_h != plane_state->crtc_h ||
src_w != plane_state->src_w ||
src_h != plane_state->src_h) {
goto out;
}
if (fb != plane_state->fb) {
drm_atomic_set_fb_for_plane(plane->state, fb);
vc4_plane_async_set_fb(plane, fb);
}
/* Set the cursor's position on the screen. This is the
* expected change from the drm_mode_cursor_universal()
* helper.
*/
plane_state->crtc_x = crtc_x;
plane_state->crtc_y = crtc_y;
/* Allow changing the start position within the cursor BO, if
* that matters.
*/
plane_state->src_x = src_x;
plane_state->src_y = src_y;
/* Update the display list based on the new crtc_x/y. */
vc4_plane_atomic_check(plane, plane_state);
/* Note that we can't just call vc4_plane_write_dlist()
* because that would smash the context data that the HVS is
* currently using.
*/
writel(vc4_state->dlist[vc4_state->pos0_offset],
&vc4_state->hw_dlist[vc4_state->pos0_offset]);
writel(vc4_state->dlist[vc4_state->pos2_offset],
&vc4_state->hw_dlist[vc4_state->pos2_offset]);
writel(vc4_state->dlist[vc4_state->ptr0_offset],
&vc4_state->hw_dlist[vc4_state->ptr0_offset]);
return 0;
out:
return drm_atomic_helper_update_plane(plane, crtc, fb,
crtc_x, crtc_y,
crtc_w, crtc_h,
src_x, src_y,
src_w, src_h,
ctx);
}
static bool vc4_format_mod_supported(struct drm_plane *plane,
uint32_t format,
uint64_t modifier)
......@@ -891,7 +868,7 @@ static bool vc4_format_mod_supported(struct drm_plane *plane,
}
static const struct drm_plane_funcs vc4_plane_funcs = {
.update_plane = vc4_update_plane,
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = vc4_plane_destroy,
.set_property = NULL,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment