Commit 53cb50aa authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: cb_pcidas: use preferred kernel types

As suggested by checkpatch.pl:

CHECK: Prefer kernel type 'u8' over 'uint8_t'
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent be3a7688
......@@ -493,7 +493,7 @@ static int wait_for_nvram_ready(unsigned long s5933_base_addr)
}
static int nvram_read(struct comedi_device *dev, unsigned int address,
uint8_t *data)
u8 *data)
{
struct cb_pcidas_private *devpriv = dev->private;
unsigned long iobase = devpriv->s5933_config;
......@@ -521,7 +521,7 @@ static int eeprom_read_insn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
uint8_t nvram_data;
u8 nvram_data;
int retval;
retval = nvram_read(dev, CR_CHAN(insn->chanspec), &nvram_data);
......@@ -553,7 +553,7 @@ static void write_calibration_bitstream(struct comedi_device *dev,
}
static void caldac_8800_write(struct comedi_device *dev,
unsigned int chan, uint8_t val)
unsigned int chan, u8 val)
{
struct cb_pcidas_private *devpriv = dev->private;
static const int bitstream_length = 11;
......@@ -626,7 +626,7 @@ static int cb_pcidas_dac08_insn_write(struct comedi_device *dev,
return insn->n;
}
static int trimpot_7376_write(struct comedi_device *dev, uint8_t value)
static int trimpot_7376_write(struct comedi_device *dev, u8 value)
{
struct cb_pcidas_private *devpriv = dev->private;
static const int bitstream_length = 7;
......@@ -651,7 +651,7 @@ static int trimpot_7376_write(struct comedi_device *dev, uint8_t value)
* ch 0 : adc gain
* ch 1 : adc postgain offset */
static int trimpot_8402_write(struct comedi_device *dev, unsigned int channel,
uint8_t value)
u8 value)
{
struct cb_pcidas_private *devpriv = dev->private;
static const int bitstream_length = 10;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment