Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and...

Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and 'clk-debugfs' into clk-next

 - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs

* clk-actions:
  MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs
  clk: actions: Add Actions S500 SoC Reset Management Unit support
  dt-bindings: reset: Add binding constants for Actions S500 RMU
  clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
  dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
  clk: actions: Fix h_clk for Actions S500 SoC

* clk-rockchip:
  clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks
  clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328"
  clk: rockchip: use separate compatibles for rk3288w-cru
  dt-bindings: clocks: add rk3288w variant compatible
  clk: rockchip: Handle clock tree for rk3288w variant
  clk: rockchip: convert rk3036 pll type to use internal lock status
  clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout
  clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout

* clk-iproc:
  clk: iproc: round clock rate to the closest

* clk-intel:
  clk: intel: Avoid unnecessary memset by improving code
  clk: intel: Improve locking in the driver
  clk: intel: Use devm_clk_hw_register() instead of clk_hw_register()

* clk-debugfs:
  clk: Add support for enabling/disabling clocks from debugfs

Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt

@@ -4,9 +4,15 @@ The RK3288 clock controller generates and supplies clock to various
 controllers within the SoC and also implements a reset controller for SoC
 peripherals.
 
+A revision of this SoC is available: rk3288w. The clock tree is a bit
+different so another dt-compatible is available. Noticed that it is only
+setting the difference but there is no automatic revision detection. This
+should be performed by bootloaders.
+
 Required Properties:
 
-- compatible: should be "rockchip,rk3288-cru"
+- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
+  case of this revision of Rockchip rk3288.
 - reg: physical base address of the controller and length of memory mapped
   region.
 - #clock-cells: should be 1.

MAINTAINERS

@@ -1533,6 +1533,7 @@ F:	drivers/mmc/host/owl-mmc.c
 F:	drivers/pinctrl/actions/*
 F:	drivers/soc/actions/
 F:	include/dt-bindings/power/owl-*
+F:	include/dt-bindings/reset/actions,*
 F:	include/linux/soc/actions/
 N:	owl
 

drivers/clk/actions/owl-s500.c

@@ -23,8 +23,10 @@
 #include "owl-gate.h"
 #include "owl-mux.h"
 #include "owl-pll.h"
+#include "owl-reset.h"
 
 #include <dt-bindings/clock/actions,s500-cmu.h>
+#include <dt-bindings/reset/actions,s500-reset.h>
 
 #define CMU_COREPLL			(0x0000)
 #define CMU_DEVPLL			(0x0004)
@@ -175,6 +177,8 @@ static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RAT
 static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT);
 
 /* gate clocks */
+static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0);
+static OWL_GATE(dmac_clk, "dmac_clk", "h_clk", CMU_DEVCLKEN0, 1, 0, 0);
 static OWL_GATE(spi0_clk, "spi0_clk", "ahb_clk", CMU_DEVCLKEN1, 10, 0, CLK_IGNORE_UNUSED);
 static OWL_GATE(spi1_clk, "spi1_clk", "ahb_clk", CMU_DEVCLKEN1, 11, 0, CLK_IGNORE_UNUSED);
 static OWL_GATE(spi2_clk, "spi2_clk", "ahb_clk", CMU_DEVCLKEN1, 12, 0, CLK_IGNORE_UNUSED);
@@ -183,7 +187,8 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0);
 static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
 
 /* divider clocks */
-static OWL_DIVIDER(h_clk, "h_clk", "ahbprevdiv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
+static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
+static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
 static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
 
 /* factor clocks */
@@ -428,6 +433,9 @@ static struct owl_clk_common *s500_clks[] = {
 	&spdif_clk.common,
 	&nand_clk.common,
 	&ecc_clk.common,
+	&apb_clk.common,
+	&dmac_clk.common,
+	&gpio_clk.common,
 };
 
 static struct clk_hw_onecell_data s500_hw_clks = {
@@ -484,24 +492,103 @@ static struct clk_hw_onecell_data s500_hw_clks = {
 		[CLK_SPDIF]		= &spdif_clk.common.hw,
 		[CLK_NAND]		= &nand_clk.common.hw,
 		[CLK_ECC]		= &ecc_clk.common.hw,
+		[CLK_APB]		= &apb_clk.common.hw,
+		[CLK_DMAC]		= &dmac_clk.common.hw,
+		[CLK_GPIO]		= &gpio_clk.common.hw,
 	},
 	.num = CLK_NR_CLKS,
 };
 
+static const struct owl_reset_map s500_resets[] = {
+	[RESET_DMAC]	= { CMU_DEVRST0, BIT(0) },
+	[RESET_NORIF]	= { CMU_DEVRST0, BIT(1) },
+	[RESET_DDR]	= { CMU_DEVRST0, BIT(2) },
+	[RESET_NANDC]	= { CMU_DEVRST0, BIT(3) },
+	[RESET_SD0]	= { CMU_DEVRST0, BIT(4) },
+	[RESET_SD1]	= { CMU_DEVRST0, BIT(5) },
+	[RESET_PCM1]	= { CMU_DEVRST0, BIT(6) },
+	[RESET_DE]	= { CMU_DEVRST0, BIT(7) },
+	[RESET_LCD]	= { CMU_DEVRST0, BIT(8) },
+	[RESET_SD2]	= { CMU_DEVRST0, BIT(9) },
+	[RESET_DSI]	= { CMU_DEVRST0, BIT(10) },
+	[RESET_CSI]	= { CMU_DEVRST0, BIT(11) },
+	[RESET_BISP]	= { CMU_DEVRST0, BIT(12) },
+	[RESET_KEY]	= { CMU_DEVRST0, BIT(14) },
+	[RESET_GPIO]	= { CMU_DEVRST0, BIT(15) },
+	[RESET_AUDIO]	= { CMU_DEVRST0, BIT(17) },
+	[RESET_PCM0]	= { CMU_DEVRST0, BIT(18) },
+	[RESET_VDE]	= { CMU_DEVRST0, BIT(19) },
+	[RESET_VCE]	= { CMU_DEVRST0, BIT(20) },
+	[RESET_GPU3D]	= { CMU_DEVRST0, BIT(22) },
+	[RESET_NIC301]	= { CMU_DEVRST0, BIT(23) },
+	[RESET_LENS]	= { CMU_DEVRST0, BIT(26) },
+	[RESET_PERIPHRESET] = { CMU_DEVRST0, BIT(27) },
+	[RESET_USB2_0]	= { CMU_DEVRST1, BIT(0) },
+	[RESET_TVOUT]	= { CMU_DEVRST1, BIT(1) },
+	[RESET_HDMI]	= { CMU_DEVRST1, BIT(2) },
+	[RESET_HDCP2TX]	= { CMU_DEVRST1, BIT(3) },
+	[RESET_UART6]	= { CMU_DEVRST1, BIT(4) },
+	[RESET_UART0]	= { CMU_DEVRST1, BIT(5) },
+	[RESET_UART1]	= { CMU_DEVRST1, BIT(6) },
+	[RESET_UART2]	= { CMU_DEVRST1, BIT(7) },
+	[RESET_SPI0]	= { CMU_DEVRST1, BIT(8) },
+	[RESET_SPI1]	= { CMU_DEVRST1, BIT(9) },
+	[RESET_SPI2]	= { CMU_DEVRST1, BIT(10) },
+	[RESET_SPI3]	= { CMU_DEVRST1, BIT(11) },
+	[RESET_I2C0]	= { CMU_DEVRST1, BIT(12) },
+	[RESET_I2C1]	= { CMU_DEVRST1, BIT(13) },
+	[RESET_USB3]	= { CMU_DEVRST1, BIT(14) },
+	[RESET_UART3]	= { CMU_DEVRST1, BIT(15) },
+	[RESET_UART4]	= { CMU_DEVRST1, BIT(16) },
+	[RESET_UART5]	= { CMU_DEVRST1, BIT(17) },
+	[RESET_I2C2]	= { CMU_DEVRST1, BIT(18) },
+	[RESET_I2C3]	= { CMU_DEVRST1, BIT(19) },
+	[RESET_ETHERNET] = { CMU_DEVRST1, BIT(20) },
+	[RESET_CHIPID]	= { CMU_DEVRST1, BIT(21) },
+	[RESET_USB2_1]	= { CMU_DEVRST1, BIT(22) },
+	[RESET_WD0RESET] = { CMU_DEVRST1, BIT(24) },
+	[RESET_WD1RESET] = { CMU_DEVRST1, BIT(25) },
+	[RESET_WD2RESET] = { CMU_DEVRST1, BIT(26) },
+	[RESET_WD3RESET] = { CMU_DEVRST1, BIT(27) },
+	[RESET_DBG0RESET] = { CMU_DEVRST1, BIT(28) },
+	[RESET_DBG1RESET] = { CMU_DEVRST1, BIT(29) },
+	[RESET_DBG2RESET] = { CMU_DEVRST1, BIT(30) },
+	[RESET_DBG3RESET] = { CMU_DEVRST1, BIT(31) },
+};
+
 static struct owl_clk_desc s500_clk_desc = {
 	.clks	    = s500_clks,
 	.num_clks   = ARRAY_SIZE(s500_clks),
 
 	.hw_clks    = &s500_hw_clks,
+
+	.resets     = s500_resets,
+	.num_resets = ARRAY_SIZE(s500_resets),
 };
 
 static int s500_clk_probe(struct platform_device *pdev)
 {
 	struct owl_clk_desc *desc;
+	struct owl_reset *reset;
+	int ret;
 
 	desc = &s500_clk_desc;
 	owl_clk_regmap_init(pdev, desc);
 
+	reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	reset->rcdev.of_node = pdev->dev.of_node;
+	reset->rcdev.ops = &owl_reset_ops;
+	reset->rcdev.nr_resets = desc->num_resets;
+	reset->reset_map = desc->resets;
+	reset->regmap = desc->regmap;
+
+	ret = devm_reset_controller_register(&pdev->dev, &reset->rcdev);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to register reset controller\n");
+
 	return owl_clk_probe(&pdev->dev, desc->hw_clks);
 }
 

drivers/clk/bcm/clk-iproc-asiu.c

@@ -119,7 +119,7 @@ static long iproc_asiu_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 	if (rate == *parent_rate)
 		return *parent_rate;
 
-	div = DIV_ROUND_UP(*parent_rate, rate);
+	div = DIV_ROUND_CLOSEST(*parent_rate, rate);
 	if (div < 2)
 		return *parent_rate;
 
@@ -145,7 +145,7 @@ static int iproc_asiu_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 		return 0;
 	}
 
-	div = DIV_ROUND_UP(parent_rate, rate);
+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
 	if (div < 2)
 		return -EINVAL;
 

drivers/clk/clk.c

@@ -3054,6 +3054,31 @@ static int clk_rate_set(void *data, u64 val)
 }
 
 #define clk_rate_mode	0644
+
+static int clk_prepare_enable_set(void *data, u64 val)
+{
+	struct clk_core *core = data;
+	int ret = 0;
+
+	if (val)
+		ret = clk_prepare_enable(core->hw->clk);
+	else
+		clk_disable_unprepare(core->hw->clk);
+
+	return ret;
+}
+
+static int clk_prepare_enable_get(void *data, u64 *val)
+{
+	struct clk_core *core = data;
+
+	*val = core->enable_count && core->prepare_count;
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(clk_prepare_enable_fops, clk_prepare_enable_get,
+			 clk_prepare_enable_set, "%llu\n");
+
 #else
 #define clk_rate_set	NULL
 #define clk_rate_mode	0444
@@ -3231,6 +3256,10 @@ static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry)
 	debugfs_create_u32("clk_notifier_count", 0444, root, &core->notifier_count);
 	debugfs_create_file("clk_duty_cycle", 0444, root, core,
 			    &clk_duty_cycle_fops);
+#ifdef CLOCK_ALLOW_WRITE_DEBUGFS
+	debugfs_create_file("clk_prepare_enable", 0644, root, core,
+			    &clk_prepare_enable_fops);
+#endif
 
 	if (core->num_parents > 0)
 		debugfs_create_file("clk_parent", 0444, root, core,

drivers/clk/rockchip/clk-pll.c

@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/clk-provider.h>
+#include <linux/iopoll.h>
 #include <linux/regmap.h>
 #include <linux/clk.h>
 #include "clk.h"
@@ -86,23 +87,14 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
 {
 	struct regmap *grf = pll->ctx->grf;
 	unsigned int val;
-	int delay = 24000000, ret;
-
-	while (delay > 0) {
-		ret = regmap_read(grf, pll->lock_offset, &val);
-		if (ret) {
-			pr_err("%s: failed to read pll lock status: %d\n",
-			       __func__, ret);
-			return ret;
-		}
+	int ret;
 
-		if (val & BIT(pll->lock_shift))
-			return 0;
-		delay--;
-	}
+	ret = regmap_read_poll_timeout(grf, pll->lock_offset, val,
+				       val & BIT(pll->lock_shift), 0, 1000);
+	if (ret)
+		pr_err("%s: timeout waiting for pll to lock\n", __func__);
 
-	pr_err("%s: timeout waiting for pll to lock\n", __func__);
-	return -ETIMEDOUT;
+	return ret;
 }
 
 /**
@@ -118,12 +110,31 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
 #define RK3036_PLLCON1_REFDIV_SHIFT		0
 #define RK3036_PLLCON1_POSTDIV2_MASK		0x7
 #define RK3036_PLLCON1_POSTDIV2_SHIFT		6
+#define RK3036_PLLCON1_LOCK_STATUS		BIT(10)
 #define RK3036_PLLCON1_DSMPD_MASK		0x1
 #define RK3036_PLLCON1_DSMPD_SHIFT		12
+#define RK3036_PLLCON1_PWRDOWN			BIT(13)
 #define RK3036_PLLCON2_FRAC_MASK		0xffffff
 #define RK3036_PLLCON2_FRAC_SHIFT		0
 
-#define RK3036_PLLCON1_PWRDOWN			(1 << 13)
+static int rockchip_rk3036_pll_wait_lock(struct rockchip_clk_pll *pll)
+{
+	u32 pllcon;
+	int ret;
+
+	/*
+	 * Lock time typical 250, max 500 input clock cycles @24MHz
+	 * So define a very safe maximum of 1000us, meaning 24000 cycles.
+	 */
+	ret = readl_relaxed_poll_timeout(pll->reg_base + RK3036_PLLCON(1),
+					 pllcon,
+					 pllcon & RK3036_PLLCON1_LOCK_STATUS,
+					 0, 1000);
+	if (ret)
+		pr_err("%s: timeout waiting for pll to lock\n", __func__);
+
+	return ret;
+}
 
 static void rockchip_rk3036_pll_get_params(struct rockchip_clk_pll *pll,
 					struct rockchip_pll_rate_table *rate)
@@ -221,7 +232,7 @@ static int rockchip_rk3036_pll_set_params(struct rockchip_clk_pll *pll,
 	writel_relaxed(pllcon, pll->reg_base + RK3036_PLLCON(2));
 
 	/* wait for the pll to lock */
-	ret = rockchip_pll_wait_lock(pll);
+	ret = rockchip_rk3036_pll_wait_lock(pll);
 	if (ret) {
 		pr_warn("%s: pll update unsuccessful, trying to restore old params\n",
 			__func__);
@@ -260,7 +271,7 @@ static int rockchip_rk3036_pll_enable(struct clk_hw *hw)
 
 	writel(HIWORD_UPDATE(0, RK3036_PLLCON1_PWRDOWN, 0),
 	       pll->reg_base + RK3036_PLLCON(1));
-	rockchip_pll_wait_lock(pll);
+	rockchip_rk3036_pll_wait_lock(pll);
 
 	return 0;
 }
@@ -589,19 +600,20 @@ static const struct clk_ops rockchip_rk3066_pll_clk_ops = {
 static int rockchip_rk3399_pll_wait_lock(struct rockchip_clk_pll *pll)
 {
 	u32 pllcon;
-	int delay = 24000000;
-
-	/* poll check the lock status in rk3399 xPLLCON2 */
-	while (delay > 0) {
-		pllcon = readl_relaxed(pll->reg_base + RK3399_PLLCON(2));
-		if (pllcon & RK3399_PLLCON2_LOCK_STATUS)
-			return 0;
+	int ret;
 
-		delay--;
-	}
+	/*
+	 * Lock time typical 250, max 500 input clock cycles @24MHz
+	 * So define a very safe maximum of 1000us, meaning 24000 cycles.
+	 */
+	ret = readl_relaxed_poll_timeout(pll->reg_base + RK3399_PLLCON(2),
+					 pllcon,
+					 pllcon & RK3399_PLLCON2_LOCK_STATUS,
+					 0, 1000);
+	if (ret)
+		pr_err("%s: timeout waiting for pll to lock\n", __func__);
 
-	pr_err("%s: timeout waiting for pll to lock\n", __func__);
-	return -ETIMEDOUT;
+	return ret;
 }
 
 static void rockchip_rk3399_pll_get_params(struct rockchip_clk_pll *pll,

drivers/clk/rockchip/clk-rk3188.c

@@ -751,6 +751,7 @@ static const char *const rk3188_critical_clocks[] __initconst = {
 	"pclk_peri",
 	"hclk_cpubus",
 	"hclk_vio_bus",
+	"sclk_mac_lbtest",
 };
 
 static struct rockchip_clk_provider *__init rk3188_common_clk_init(struct device_node *np)

drivers/clk/rockchip/clk-rk3288.c

@@ -15,6 +15,11 @@
 #define RK3288_GRF_SOC_CON(x)	(0x244 + x * 4)
 #define RK3288_GRF_SOC_STATUS1	0x284
 
+enum rk3288_variant {
+	RK3288_CRU,
+	RK3288W_CRU,
+};
+
 enum rk3288_plls {
 	apll, dpll, cpll, gpll, npll,
 };
@@ -425,8 +430,6 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	COMPOSITE(0, "aclk_vio0", mux_pll_src_cpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
 			RK3288_CLKSEL_CON(31), 6, 2, MFLAGS, 0, 5, DFLAGS,
 			RK3288_CLKGATE_CON(3), 0, GFLAGS),
-	DIV(0, "hclk_vio", "aclk_vio0", 0,
-			RK3288_CLKSEL_CON(28), 8, 5, DFLAGS),
 	COMPOSITE(0, "aclk_vio1", mux_pll_src_cpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
 			RK3288_CLKSEL_CON(31), 14, 2, MFLAGS, 8, 5, DFLAGS,
 			RK3288_CLKGATE_CON(3), 2, GFLAGS),
@@ -819,6 +822,16 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	INVERTER(0, "pclk_isp", "pclk_isp_in", RK3288_CLKSEL_CON(29), 3, IFLAGS),
 };
 
+static struct rockchip_clk_branch rk3288w_hclkvio_branch[] __initdata = {
+	DIV(0, "hclk_vio", "aclk_vio1", 0,
+			RK3288_CLKSEL_CON(28), 8, 5, DFLAGS),
+};
+
+static struct rockchip_clk_branch rk3288_hclkvio_branch[] __initdata = {
+	DIV(0, "hclk_vio", "aclk_vio0", 0,
+			RK3288_CLKSEL_CON(28), 8, 5, DFLAGS),
+};
+
 static const char *const rk3288_critical_clocks[] __initconst = {
 	"aclk_cpu",
 	"aclk_peri",
@@ -914,7 +927,8 @@ static struct syscore_ops rk3288_clk_syscore_ops = {
 	.resume = rk3288_clk_resume,
 };
 
-static void __init rk3288_clk_init(struct device_node *np)
+static void __init rk3288_common_init(struct device_node *np,
+				      enum rk3288_variant soc)
 {
 	struct rockchip_clk_provider *ctx;
 
@@ -936,6 +950,14 @@ static void __init rk3288_clk_init(struct device_node *np)
 				   RK3288_GRF_SOC_STATUS1);
 	rockchip_clk_register_branches(ctx, rk3288_clk_branches,
 				  ARRAY_SIZE(rk3288_clk_branches));
+
+	if (soc == RK3288W_CRU)
+		rockchip_clk_register_branches(ctx, rk3288w_hclkvio_branch,
+					       ARRAY_SIZE(rk3288w_hclkvio_branch));
+	else
+		rockchip_clk_register_branches(ctx, rk3288_hclkvio_branch,
+					       ARRAY_SIZE(rk3288_hclkvio_branch));
+
 	rockchip_clk_protect_critical(rk3288_critical_clocks,
 				      ARRAY_SIZE(rk3288_critical_clocks));
 
@@ -954,4 +976,15 @@ static void __init rk3288_clk_init(struct device_node *np)
 
 	rockchip_clk_of_add_provider(np, ctx);
 }
+
+static void __init rk3288_clk_init(struct device_node *np)
+{
+	rk3288_common_init(np, RK3288_CRU);
+}
 CLK_OF_DECLARE(rk3288_cru, "rockchip,rk3288-cru", rk3288_clk_init);
+
+static void __init rk3288w_clk_init(struct device_node *np)
+{
+	rk3288_common_init(np, RK3288W_CRU);
+}
+CLK_OF_DECLARE(rk3288w_cru, "rockchip,rk3288w-cru", rk3288w_clk_init);

drivers/clk/rockchip/clk-rk3328.c

@@ -808,22 +808,22 @@ static struct rockchip_clk_branch rk3328_clk_branches[] __initdata = {
 	MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "clk_sdmmc",
 	    RK3328_SDMMC_CON0, 1),
 	MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "clk_sdmmc",
-	    RK3328_SDMMC_CON1, 0),
+	    RK3328_SDMMC_CON1, 1),
 
 	MMC(SCLK_SDIO_DRV, "sdio_drv", "clk_sdio",
 	    RK3328_SDIO_CON0, 1),
 	MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "clk_sdio",
-	    RK3328_SDIO_CON1, 0),
+	    RK3328_SDIO_CON1, 1),
 
 	MMC(SCLK_EMMC_DRV, "emmc_drv", "clk_emmc",
 	    RK3328_EMMC_CON0, 1),
 	MMC(SCLK_EMMC_SAMPLE, "emmc_sample", "clk_emmc",
-	    RK3328_EMMC_CON1, 0),
+	    RK3328_EMMC_CON1, 1),
 
 	MMC(SCLK_SDMMC_EXT_DRV, "sdmmc_ext_drv", "clk_sdmmc_ext",
 	    RK3328_SDMMC_EXT_CON0, 1),
 	MMC(SCLK_SDMMC_EXT_SAMPLE, "sdmmc_ext_sample", "clk_sdmmc_ext",
-	    RK3328_SDMMC_EXT_CON1, 0),
+	    RK3328_SDMMC_EXT_CON1, 1),
 };
 
 static const char *const rk3328_critical_clocks[] __initconst = {

drivers/clk/x86/clk-cgu-pll.c

@@ -128,7 +128,7 @@ lgm_clk_register_pll(struct lgm_clk_provider *ctx,
 	pll->hw.init = &init;
 
 	hw = &pll->hw;
-	ret = clk_hw_register(dev, hw);
+	ret = devm_clk_hw_register(dev, hw);
 	if (ret)
 		return ERR_PTR(ret);
 

drivers/clk/x86/clk-cgu.c

@@ -119,7 +119,7 @@ lgm_clk_register_mux(struct lgm_clk_provider *ctx,
 	mux->hw.init = &init;
 
 	hw = &mux->hw;
-	ret = clk_hw_register(dev, hw);
+	ret = devm_clk_hw_register(dev, hw);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -247,7 +247,7 @@ lgm_clk_register_divider(struct lgm_clk_provider *ctx,
 	div->hw.init = &init;
 
 	hw = &div->hw;
-	ret = clk_hw_register(dev, hw);
+	ret = devm_clk_hw_register(dev, hw);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -361,7 +361,7 @@ lgm_clk_register_gate(struct lgm_clk_provider *ctx,
 	gate->hw.init = &init;
 
 	hw = &gate->hw;
-	ret = clk_hw_register(dev, hw);
+	ret = devm_clk_hw_register(dev, hw);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -420,18 +420,14 @@ lgm_clk_ddiv_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 {
 	struct lgm_clk_ddiv *ddiv = to_lgm_clk_ddiv(hw);
 	unsigned int div0, div1, exdiv;
-	unsigned long flags;
 	u64 prate;
 
-	spin_lock_irqsave(&ddiv->lock, flags);
 	div0 = lgm_get_clk_val(ddiv->membase, ddiv->reg,
 			       ddiv->shift0, ddiv->width0) + 1;
 	div1 = lgm_get_clk_val(ddiv->membase, ddiv->reg,
 			       ddiv->shift1, ddiv->width1) + 1;
 	exdiv = lgm_get_clk_val(ddiv->membase, ddiv->reg,
 				ddiv->shift2, ddiv->width2);
-	spin_unlock_irqrestore(&ddiv->lock, flags);
-
 	prate = (u64)parent_rate;
 	do_div(prate, div0);
 	do_div(prate, div1);
@@ -548,24 +544,21 @@ lgm_clk_ddiv_round_rate(struct clk_hw *hw, unsigned long rate,
 		div = div * 2;
 		div = DIV_ROUND_CLOSEST_ULL((u64)div, 5);
 	}
+	spin_unlock_irqrestore(&ddiv->lock, flags);
 
-	if (div <= 0) {
-		spin_unlock_irqrestore(&ddiv->lock, flags);
+	if (div <= 0)
 		return *prate;
-	}
 
-	if (lgm_clk_get_ddiv_val(div, &ddiv1, &ddiv2) != 0) {
-		if (lgm_clk_get_ddiv_val(div + 1, &ddiv1, &ddiv2) != 0) {
-			spin_unlock_irqrestore(&ddiv->lock, flags);
+	if (lgm_clk_get_ddiv_val(div, &ddiv1, &ddiv2) != 0)
+		if (lgm_clk_get_ddiv_val(div + 1, &ddiv1, &ddiv2) != 0)
 			return -EINVAL;
-		}
-	}
 
 	rate64 = *prate;
 	do_div(rate64, ddiv1);
 	do_div(rate64, ddiv2);
 
 	/* if predivide bit is enabled, modify rounded rate by factor of 2.5 */
+	spin_lock_irqsave(&ddiv->lock, flags);
 	if (lgm_get_clk_val(ddiv->membase, ddiv->reg, ddiv->shift2, 1)) {
 		rate64 = rate64 * 2;
 		rate64 = DIV_ROUND_CLOSEST_ULL(rate64, 5);
@@ -588,19 +581,18 @@ int lgm_clk_register_ddiv(struct lgm_clk_provider *ctx,
 			  unsigned int nr_clk)
 {
 	struct device *dev = ctx->dev;
-	struct clk_init_data init = {};
-	struct lgm_clk_ddiv *ddiv;
 	struct clk_hw *hw;
 	unsigned int idx;
 	int ret;
 
 	for (idx = 0; idx < nr_clk; idx++, list++) {
-		ddiv = NULL;
+		struct clk_init_data init = {};
+		struct lgm_clk_ddiv *ddiv;
+
 		ddiv = devm_kzalloc(dev, sizeof(*ddiv), GFP_KERNEL);
 		if (!ddiv)
 			return -ENOMEM;
 
-		memset(&init, 0, sizeof(init));
 		init.name = list->name;
 		init.ops = &lgm_clk_ddiv_ops;
 		init.flags = list->flags;
@@ -624,7 +616,7 @@ int lgm_clk_register_ddiv(struct lgm_clk_provider *ctx,
 		ddiv->hw.init = &init;
 
 		hw = &ddiv->hw;
-		ret = clk_hw_register(dev, hw);
+		ret = devm_clk_hw_register(dev, hw);
 		if (ret) {
 			dev_err(dev, "register clk: %s failed!\n", list->name);
 			return ret;

include/dt-bindings/clock/actions,s500-cmu.h

@@ -72,7 +72,12 @@
 #define CLK_NAND		52
 #define CLK_ECC			53
 #define CLK_RMII_REF		54
+#define CLK_GPIO		55
 
-#define CLK_NR_CLKS	       (CLK_RMII_REF + 1)
+/* system clock (part 2) */
+#define CLK_APB			56
+#define CLK_DMAC		57
+
+#define CLK_NR_CLKS		(CLK_DMAC + 1)
 
 #endif /* __DT_BINDINGS_CLOCK_S500_CMU_H */

include/dt-bindings/reset/actions,s500-reset.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Device Tree binding constants for Actions Semi S500 Reset Management Unit
+ *
+ * Copyright (c) 2014 Actions Semi Inc.
+ * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+#ifndef __DT_BINDINGS_ACTIONS_S500_RESET_H
+#define __DT_BINDINGS_ACTIONS_S500_RESET_H
+
+#define RESET_DMAC				0
+#define RESET_NORIF				1
+#define RESET_DDR				2
+#define RESET_NANDC				3
+#define RESET_SD0				4
+#define RESET_SD1				5
+#define RESET_PCM1				6
+#define RESET_DE				7
+#define RESET_LCD				8
+#define RESET_SD2				9
+#define RESET_DSI				10
+#define RESET_CSI				11
+#define RESET_BISP				12
+#define RESET_KEY				13
+#define RESET_GPIO				14
+#define RESET_AUDIO				15
+#define RESET_PCM0				16
+#define RESET_VDE				17
+#define RESET_VCE				18
+#define RESET_GPU3D				19
+#define RESET_NIC301				20
+#define RESET_LENS				21
+#define RESET_PERIPHRESET			22
+#define RESET_USB2_0				23
+#define RESET_TVOUT				24
+#define RESET_HDMI				25
+#define RESET_HDCP2TX				26
+#define RESET_UART6				27
+#define RESET_UART0				28
+#define RESET_UART1				29
+#define RESET_UART2				30
+#define RESET_SPI0				31
+#define RESET_SPI1				32
+#define RESET_SPI2				33
+#define RESET_SPI3				34
+#define RESET_I2C0				35
+#define RESET_I2C1				36
+#define RESET_USB3				37
+#define RESET_UART3				38
+#define RESET_UART4				39
+#define RESET_UART5				40
+#define RESET_I2C2				41
+#define RESET_I2C3				42
+#define RESET_ETHERNET				43
+#define RESET_CHIPID				44
+#define RESET_USB2_1				45
+#define RESET_WD0RESET				46
+#define RESET_WD1RESET				47
+#define RESET_WD2RESET				48
+#define RESET_WD3RESET				49
+#define RESET_DBG0RESET				50
+#define RESET_DBG1RESET				51
+#define RESET_DBG2RESET				52
+#define RESET_DBG3RESET				53
+
+#endif /* __DT_BINDINGS_ACTIONS_S500_RESET_H */