serial: imx: Remove serial_rs485 sanitization

The driver provides different rs485_supported for the case where RTS is
not available making it unnecessary to handle it in
imx_uart_rs485_config.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220606100433.13793-32-ilpo.jarvinen@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/imx.c

@@ -1913,10 +1913,6 @@ static int imx_uart_rs485_config(struct uart_port *port,
 	struct imx_port *sport = (struct imx_port *)port;
 	u32 ucr2;
 
-	/* RTS is required to control the transmitter */
-	if (!sport->have_rtscts && !sport->have_rtsgpio)
-		rs485conf->flags &= ~SER_RS485_ENABLED;
-
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		/* Enable receiver if low-active RTS signal is requested */
 		if (sport->have_rtscts &&  !sport->have_rtsgpio &&