Commit 56548fc0 authored by Paul Mackerras's avatar Paul Mackerras Committed by Michael Ellerman

powerpc/powernv: Return to cpu offline loop when finished in KVM guest

When a secondary hardware thread has finished running a KVM guest, we
currently put that thread into nap mode using a nap instruction in
the KVM code.  This changes the code so that instead of doing a nap
instruction directly, we instead cause the call to power7_nap() that
put the thread into nap mode to return.  The reason for doing this is
to avoid having the KVM code having to know what low-power mode to
put the thread into.

In the case of a secondary thread used to run a KVM guest, the thread
will be offline from the point of view of the host kernel, and the
relevant power7_nap() call is the one in pnv_smp_cpu_disable().
In this case we don't want to clear pending IPIs in the offline loop
in that function, since that might cause us to miss the wakeup for
the next time the thread needs to run a guest.  To tell whether or
not to clear the interrupt, we use the SRR1 value returned from
power7_nap(), and check if it indicates an external interrupt.  We
arrange that the return from power7_nap() when we have finished running
a guest returns 0, so pending interrupts don't get flushed in that
case.

Note that it is important a secondary thread that has finished
executing in the guest, or that didn't have a guest to run, should
not return to power7_nap's caller while the kvm_hstate.hwthread_req
flag in the PACA is non-zero, because the return from power7_nap
will reenable the MMU, and the MMU might still be in guest context.
In this situation we spin at low priority in real mode waiting for
hwthread_req to become zero.
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 682e77c8
......@@ -451,7 +451,7 @@ extern unsigned long cpuidle_disable;
enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
extern int powersave_nap; /* set if nap mode can be used in idle loop */
extern void power7_nap(int check_irq);
extern unsigned long power7_nap(int check_irq);
extern void power7_sleep(void);
extern void flush_instruction_cache(void);
extern void hard_reset_now(void);
......
......@@ -131,6 +131,8 @@ BEGIN_FTR_SECTION
1:
#endif
/* Return SRR1 from power7_nap() */
mfspr r3,SPRN_SRR1
beq cr1,2f
b power7_wakeup_noloss
2: b power7_wakeup_loss
......
......@@ -212,6 +212,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
mtspr SPRN_SRR0,r5
rfid
/*
* R3 here contains the value that will be returned to the caller
* of power7_nap.
*/
_GLOBAL(power7_wakeup_loss)
ld r1,PACAR1(r13)
BEGIN_FTR_SECTION
......@@ -219,15 +223,19 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
REST_NVGPRS(r1)
REST_GPR(2, r1)
ld r3,_CCR(r1)
ld r6,_CCR(r1)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
mtcr r3
mtcr r6
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid
/*
* R3 here contains the value that will be returned to the caller
* of power7_nap.
*/
_GLOBAL(power7_wakeup_noloss)
lbz r0,PACA_NAPSTATELOST(r13)
cmpwi r0,0
......
......@@ -201,8 +201,6 @@ kvmppc_primary_no_guest:
bge kvm_novcpu_exit /* another thread already exiting */
li r3, NAPPING_NOVCPU
stb r3, HSTATE_NAPPING(r13)
li r3, 1
stb r3, HSTATE_HWTHREAD_REQ(r13)
b kvm_do_nap
......@@ -293,6 +291,8 @@ kvm_start_guest:
/* if we have no vcpu to run, go back to sleep */
beq kvm_no_guest
kvm_secondary_got_guest:
/* Set HSTATE_DSCR(r13) to something sensible */
ld r6, PACA_DSCR(r13)
std r6, HSTATE_DSCR(r13)
......@@ -318,27 +318,46 @@ kvm_start_guest:
stwcx. r3, 0, r4
bne 51b
/*
* At this point we have finished executing in the guest.
* We need to wait for hwthread_req to become zero, since
* we may not turn on the MMU while hwthread_req is non-zero.
* While waiting we also need to check if we get given a vcpu to run.
*/
kvm_no_guest:
li r0, KVM_HWTHREAD_IN_NAP
lbz r3, HSTATE_HWTHREAD_REQ(r13)
cmpwi r3, 0
bne 53f
HMT_MEDIUM
li r0, KVM_HWTHREAD_IN_KERNEL
stb r0, HSTATE_HWTHREAD_STATE(r13)
kvm_do_nap:
/* Clear the runlatch bit before napping */
mfspr r2, SPRN_CTRLF
clrrdi r2, r2, 1
mtspr SPRN_CTRLT, r2
/* need to recheck hwthread_req after a barrier, to avoid race */
sync
lbz r3, HSTATE_HWTHREAD_REQ(r13)
cmpwi r3, 0
bne 54f
/*
* We jump to power7_wakeup_loss, which will return to the caller
* of power7_nap in the powernv cpu offline loop. The value we
* put in r3 becomes the return value for power7_nap.
*/
li r3, LPCR_PECE0
mfspr r4, SPRN_LPCR
rlwimi r4, r3, 0, LPCR_PECE0 | LPCR_PECE1
mtspr SPRN_LPCR, r4
isync
std r0, HSTATE_SCRATCH0(r13)
ptesync
ld r0, HSTATE_SCRATCH0(r13)
1: cmpd r0, r0
bne 1b
nap
b .
li r3, 0
b power7_wakeup_loss
53: HMT_LOW
ld r4, HSTATE_KVM_VCPU(r13)
cmpdi r4, 0
beq kvm_no_guest
HMT_MEDIUM
b kvm_secondary_got_guest
54: li r0, KVM_HWTHREAD_IN_KVM
stb r0, HSTATE_HWTHREAD_STATE(r13)
b kvm_no_guest
/******************************************************************************
* *
......@@ -2172,6 +2191,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
* occurs, with PECE1, PECE0 and PECEDP set in LPCR. Also clear the
* runlatch bit before napping.
*/
kvm_do_nap:
mfspr r2, SPRN_CTRLF
clrrdi r2, r2, 1
mtspr SPRN_CTRLT, r2
......
......@@ -149,6 +149,7 @@ static int pnv_smp_cpu_disable(void)
static void pnv_smp_cpu_kill_self(void)
{
unsigned int cpu;
unsigned long srr1;
/* Standard hot unplug procedure */
local_irq_disable();
......@@ -165,13 +166,25 @@ static void pnv_smp_cpu_kill_self(void)
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
while (!generic_check_cpu_restart(cpu)) {
ppc64_runlatch_off();
power7_nap(1);
srr1 = power7_nap(1);
ppc64_runlatch_on();
/* Clear the IPI that woke us up */
icp_native_flush_interrupt();
local_paca->irq_happened &= PACA_IRQ_HARD_DIS;
mb();
/*
* If the SRR1 value indicates that we woke up due to
* an external interrupt, then clear the interrupt.
* We clear the interrupt before checking for the
* reason, so as to avoid a race where we wake up for
* some other reason, find nothing and clear the interrupt
* just as some other cpu is sending us an interrupt.
* If we returned from power7_nap as a result of
* having finished executing in a KVM guest, then srr1
* contains 0.
*/
if ((srr1 & SRR1_WAKEMASK) == SRR1_WAKEEE) {
icp_native_flush_interrupt();
local_paca->irq_happened &= PACA_IRQ_HARD_DIS;
smp_mb();
}
if (cpu_core_split_required())
continue;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment