Merge branch 'for-mingo' of...

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul E. McKenney:

 "The largest feature of this series is shrinking and simplification,
  with the following diffstat summary:

     79 files changed, 1496 insertions(+), 4211 deletions(-)

  In other words, this series represents a net reduction of more than 2700
  lines of code."
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/RCU/00-INDEX

@@ -28,8 +28,6 @@ stallwarn.txt
 	- RCU CPU stall warnings (module parameter rcu_cpu_stall_suppress)
 torture.txt
 	- RCU Torture Test Operation (CONFIG_RCU_TORTURE_TEST)
-trace.txt
-	- CONFIG_RCU_TRACE debugfs files and formats
 UP.txt
 	- RCU on Uniprocessor Systems
 whatisRCU.txt

Documentation/RCU/Design/Requirements/Requirements.html

@@ -559,9 +559,7 @@ The <tt>rcu_access_pointer()</tt> on line&nbsp;6 is similar to
 	For <tt>remove_gp_synchronous()</tt>, as long as all modifications
 	to <tt>gp</tt> are carried out while holding <tt>gp_lock</tt>,
 	the above optimizations are harmless.
-	However,
-	with <tt>CONFIG_SPARSE_RCU_POINTER=y</tt>,
-	<tt>sparse</tt> will complain if you
+	However, <tt>sparse</tt> will complain if you
 	define <tt>gp</tt> with <tt>__rcu</tt> and then
 	access it without using
 	either <tt>rcu_access_pointer()</tt> or <tt>rcu_dereference()</tt>.
@@ -1849,7 +1847,8 @@ mass storage, or user patience, whichever comes first.
 If the nesting is not visible to the compiler, as is the case with
 mutually recursive functions each in its own translation unit,
 stack overflow will result.
-If the nesting takes the form of loops, either the control variable
+If the nesting takes the form of loops, perhaps in the guise of tail
+recursion, either the control variable
 will overflow or (in the Linux kernel) you will get an RCU CPU stall warning.
 Nevertheless, this class of RCU implementations is one
 of the most composable constructs in existence.
@@ -1977,9 +1976,8 @@ guard against mishaps and misuse:
 	and <tt>rcu_dereference()</tt>, perhaps (incorrectly)
 	substituting a simple assignment.
 	To catch this sort of error, a given RCU-protected pointer may be
-	tagged with <tt>__rcu</tt>, after which running sparse
-	with <tt>CONFIG_SPARSE_RCU_POINTER=y</tt> will complain
-	about simple-assignment accesses to that pointer.
+	tagged with <tt>__rcu</tt>, after which sparse
+	will complain about simple-assignment accesses to that pointer.
 	Arnd Bergmann made me aware of this requirement, and also
 	supplied the needed
 	<a href="https://lwn.net/Articles/376011/">patch series</a>.
@@ -2036,7 +2034,7 @@ guard against mishaps and misuse:
 	some other synchronization mechanism, for example, reference
 	counting.
 <li>	In kernels built with <tt>CONFIG_RCU_TRACE=y</tt>, RCU-related
-	information is provided via both debugfs and event tracing.
+	information is provided via event tracing.
 <li>	Open-coded use of <tt>rcu_assign_pointer()</tt> and
 	<tt>rcu_dereference()</tt> to create typical linked
 	data structures can be surprisingly error-prone.
@@ -2519,11 +2517,7 @@ It is similarly socially unacceptable to interrupt an
 <tt>nohz_full</tt> CPU running in userspace.
 RCU must therefore track <tt>nohz_full</tt> userspace
 execution.
-And in
-<a href="https://lwn.net/Articles/558284/"><tt>CONFIG_NO_HZ_FULL_SYSIDLE=y</tt></a>
-kernels, RCU must separately track idle CPUs on the one hand and
-CPUs that are either idle or executing in userspace on the other.
-In both cases, RCU must be able to sample state at two points in
+RCU must therefore be able to sample state at two points in
 time, and be able to determine whether or not some other CPU spent
 any time idle and/or executing in userspace.
 
@@ -2935,6 +2929,20 @@ The reason that this is possible is that SRCU is insensitive
 to whether or not a CPU is online, which means that <tt>srcu_barrier()</tt>
 need not exclude CPU-hotplug operations.
 
+<p>
+SRCU also differs from other RCU flavors in that SRCU's expedited and
+non-expedited grace periods are implemented by the same mechanism.
+This means that in the current SRCU implementation, expediting a
+future grace period has the side effect of expediting all prior
+grace periods that have not yet completed.
+(But please note that this is a property of the current implementation,
+not necessarily of future implementations.)
+In addition, if SRCU has been idle for longer than the interval
+specified by the <tt>srcutree.exp_holdoff</tt> kernel boot parameter
+(25&nbsp;microseconds by default),
+and if a <tt>synchronize_srcu()</tt> invocation ends this idle period,
+that invocation will be automatically expedited.
+
 <p>
 As of v4.12, SRCU's callbacks are maintained per-CPU, eliminating
 a locking bottleneck present in prior kernel versions.

Documentation/RCU/checklist.txt

@@ -413,11 +413,11 @@ over a rather long period of time, but improvements are always welcome!
 	read-side critical sections.  It is the responsibility of the
 	RCU update-side primitives to deal with this.
 
-17.	Use CONFIG_PROVE_RCU, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the
-	__rcu sparse checks (enabled by CONFIG_SPARSE_RCU_POINTER) to
-	validate your RCU code.  These can help find problems as follows:
+17.	Use CONFIG_PROVE_LOCKING, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the
+	__rcu sparse checks to validate your RCU code.	These can help
+	find problems as follows:
 
-	CONFIG_PROVE_RCU: check that accesses to RCU-protected data
+	CONFIG_PROVE_LOCKING: check that accesses to RCU-protected data
 		structures are carried out under the proper RCU
 		read-side critical section, while holding the right
 		combination of locks, or whatever other conditions

Documentation/admin-guide/kernel-parameters.txt

@@ -3238,21 +3238,17 @@
 
 	rcutree.gp_cleanup_delay=	[KNL]
 			Set the number of jiffies to delay each step of
-			RCU grace-period cleanup.  This only has effect
-			when CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is set.
+			RCU grace-period cleanup.
 
 	rcutree.gp_init_delay=	[KNL]
 			Set the number of jiffies to delay each step of
-			RCU grace-period initialization.  This only has
-			effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT
-			is set.
+			RCU grace-period initialization.
 
 	rcutree.gp_preinit_delay=	[KNL]
 			Set the number of jiffies to delay each step of
 			RCU grace-period pre-initialization, that is,
 			the propagation of recent CPU-hotplug changes up
-			the rcu_node combining tree.  This only has effect
-			when CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is set.
+			the rcu_node combining tree.
 
 	rcutree.rcu_fanout_exact= [KNL]
 			Disable autobalancing of the rcu_node combining
@@ -3328,6 +3324,17 @@
 			This wake_up() will be accompanied by a
 			WARN_ONCE() splat and an ftrace_dump().
 
+	rcuperf.gp_async= [KNL]
+			Measure performance of asynchronous
+			grace-period primitives such as call_rcu().
+
+	rcuperf.gp_async_max= [KNL]
+			Specify the maximum number of outstanding
+			callbacks per writer thread.  When a writer
+			thread exceeds this limit, it invokes the
+			corresponding flavor of rcu_barrier() to allow
+			previously posted callbacks to drain.
+
 	rcuperf.gp_exp= [KNL]
 			Measure performance of expedited synchronous
 			grace-period primitives.
@@ -3355,17 +3362,22 @@
 	rcuperf.perf_runnable= [BOOT]
 			Start rcuperf running at boot time.
 
+	rcuperf.perf_type= [KNL]
+			Specify the RCU implementation to test.
+
 	rcuperf.shutdown= [KNL]
 			Shut the system down after performance tests
 			complete.  This is useful for hands-off automated
 			testing.
 
-	rcuperf.perf_type= [KNL]
-			Specify the RCU implementation to test.
-
 	rcuperf.verbose= [KNL]
 			Enable additional printk() statements.
 
+	rcuperf.writer_holdoff= [KNL]
+			Write-side holdoff between grace periods,
+			in microseconds.  The default of zero says
+			no holdoff.
+
 	rcutorture.cbflood_inter_holdoff= [KNL]
 			Set holdoff time (jiffies) between successive
 			callback-flood tests.
@@ -3803,6 +3815,15 @@
 	spia_pedr=
 	spia_peddr=
 
+	srcutree.counter_wrap_check [KNL]
+			Specifies how frequently to check for
+			grace-period sequence counter wrap for the
+			srcu_data structure's ->srcu_gp_seq_needed field.
+			The greater the number of bits set in this kernel
+			parameter, the less frequently counter wrap will
+			be checked for.  Note that the bottom two bits
+			are ignored.
+
 	srcutree.exp_holdoff [KNL]
 			Specifies how many nanoseconds must elapse
 			since the end of the last SRCU grace period for

Documentation/core-api/atomic_ops.rst

@@ -303,6 +303,11 @@ defined which accomplish this::
 	void smp_mb__before_atomic(void);
 	void smp_mb__after_atomic(void);
 
+Preceding a non-value-returning read-modify-write atomic operation with
+smp_mb__before_atomic() and following it with smp_mb__after_atomic()
+provides the same full ordering that is provided by value-returning
+read-modify-write atomic operations.
+
 For example, smp_mb__before_atomic() can be used like so::
 
 	obj->dead = 1;

Documentation/dev-tools/sparse.rst

@@ -103,9 +103,3 @@ have already built it.
 
 The optional make variable CF can be used to pass arguments to sparse.  The
 build system passes -Wbitwise to sparse automatically.
-
-Checking RCU annotations
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-RCU annotations are not checked by default.  To enable RCU annotation
-checks, include -DCONFIG_SPARSE_RCU_POINTER in your CF flags.

Documentation/kernel-per-CPU-kthreads.txt

@@ -109,13 +109,12 @@ SCHED_SOFTIRQ: Do all of the following:
 	on that CPU.  If a thread that expects to run on the de-jittered
 	CPU awakens, the scheduler will send an IPI that can result in
 	a subsequent SCHED_SOFTIRQ.
-2.	Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y,
-	CONFIG_NO_HZ_FULL=y, and, in addition, ensure that the CPU
-	to be de-jittered is marked as an adaptive-ticks CPU using the
-	"nohz_full=" boot parameter.  This reduces the number of
-	scheduler-clock interrupts that the de-jittered CPU receives,
-	minimizing its chances of being selected to do the load balancing
-	work that runs in SCHED_SOFTIRQ context.
+2.	CONFIG_NO_HZ_FULL=y and ensure that the CPU to be de-jittered
+	is marked as an adaptive-ticks CPU using the "nohz_full="
+	boot parameter.  This reduces the number of scheduler-clock
+	interrupts that the de-jittered CPU receives, minimizing its
+	chances of being selected to do the load balancing work that
+	runs in SCHED_SOFTIRQ context.
 3.	To the extent possible, keep the CPU out of the kernel when it
 	is non-idle, for example, by avoiding system calls and by
 	forcing both kernel threads and interrupts to execute elsewhere.
@@ -135,11 +134,10 @@ HRTIMER_SOFTIRQ:  Do all of the following:
 RCU_SOFTIRQ:  Do at least one of the following:
 1.	Offload callbacks and keep the CPU in either dyntick-idle or
 	adaptive-ticks state by doing all of the following:
-	a.	Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y,
-		CONFIG_NO_HZ_FULL=y, and, in addition ensure that the CPU
-		to be de-jittered is marked as an adaptive-ticks CPU using
-		the "nohz_full=" boot parameter.  Bind the rcuo kthreads
-		to housekeeping CPUs, which can tolerate OS jitter.
+	a.	CONFIG_NO_HZ_FULL=y and ensure that the CPU to be
+		de-jittered is marked as an adaptive-ticks CPU using the
+		"nohz_full=" boot parameter.  Bind the rcuo kthreads to
+		housekeeping CPUs, which can tolerate OS jitter.
 	b.	To the extent possible, keep the CPU out of the kernel
 		when it is non-idle, for example, by avoiding system
 		calls and by forcing both kernel threads and interrupts
@@ -236,11 +234,10 @@ To reduce its OS jitter, do at least one of the following:
 	is feasible only if your workload never requires RCU priority
 	boosting, for example, if you ensure frequent idle time on all
 	CPUs that might execute within the kernel.
-3.	Build with CONFIG_RCU_NOCB_CPU=y and CONFIG_RCU_NOCB_CPU_ALL=y,
-	which offloads all RCU callbacks to kthreads that can be moved
-	off of CPUs susceptible to OS jitter.  This approach prevents the
-	rcuc/%u kthreads from having any work to do, so that they are
-	never awakened.
+3.	Build with CONFIG_RCU_NOCB_CPU=y and boot with the rcu_nocbs=
+	boot parameter offloading RCU callbacks from all CPUs susceptible
+	to OS jitter.  This approach prevents the rcuc/%u kthreads from
+	having any work to do, so that they are never awakened.
 4.	Ensure that the CPU never enters the kernel, and, in particular,
 	avoid initiating any CPU hotplug operations on this CPU.  This is
 	another way of preventing any callbacks from being queued on the

Documentation/memory-barriers.txt

@@ -27,7 +27,7 @@ The purpose of this document is twofold:
  (2) to provide a guide as to how to use the barriers that are available.
 
 Note that an architecture can provide more than the minimum requirement
-for any particular barrier, but if the architecure provides less than
+for any particular barrier, but if the architecture provides less than
 that, that architecture is incorrect.
 
 Note also that it is possible that a barrier may be a no-op for an

Documentation/timers/NO_HZ.txt

@@ -194,32 +194,9 @@ that the RCU callbacks are processed in a timely fashion.
 
 Another approach is to offload RCU callback processing to "rcuo" kthreads
 using the CONFIG_RCU_NOCB_CPU=y Kconfig option.  The specific CPUs to
-offload may be selected via several methods:
-
-1.	One of three mutually exclusive Kconfig options specify a
-	build-time default for the CPUs to offload:
-
-	a.	The CONFIG_RCU_NOCB_CPU_NONE=y Kconfig option results in
-		no CPUs being offloaded.
-
-	b.	The CONFIG_RCU_NOCB_CPU_ZERO=y Kconfig option causes
-		CPU 0 to be offloaded.
-
-	c.	The CONFIG_RCU_NOCB_CPU_ALL=y Kconfig option causes all
-		CPUs to be offloaded.  Note that the callbacks will be
-		offloaded to "rcuo" kthreads, and that those kthreads
-		will in fact run on some CPU.  However, this approach
-		gives fine-grained control on exactly which CPUs the
-		callbacks run on, along with their scheduling priority
-		(including the default of SCHED_OTHER), and it further
-		allows this control to be varied dynamically at runtime.
-
-2.	The "rcu_nocbs=" kernel boot parameter, which takes a comma-separated
-	list of CPUs and CPU ranges, for example, "1,3-5" selects CPUs 1,
-	3, 4, and 5.  The specified CPUs will be offloaded in addition to
-	any CPUs specified as offloaded by CONFIG_RCU_NOCB_CPU_ZERO=y or
-	CONFIG_RCU_NOCB_CPU_ALL=y.  This means that the "rcu_nocbs=" boot
-	parameter has no effect for kernels built with RCU_NOCB_CPU_ALL=y.
+offload may be selected using The "rcu_nocbs=" kernel boot parameter,
+which takes a comma-separated list of CPUs and CPU ranges, for example,
+"1,3-5" selects CPUs 1, 3, 4, and 5.
 
 The offloaded CPUs will never queue RCU callbacks, and therefore RCU
 never prevents offloaded CPUs from entering either dyntick-idle mode

include/linux/bcm47xx_nvram.h

@@ -8,6 +8,7 @@
 #ifndef __BCM47XX_NVRAM_H
 #define __BCM47XX_NVRAM_H
 
+#include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/vmalloc.h>

include/linux/compiler.h

@@ -17,11 +17,7 @@
 # define __release(x)	__context__(x,-1)
 # define __cond_lock(x,c)	((c) ? ({ __acquire(x); 1; }) : 0)
 # define __percpu	__attribute__((noderef, address_space(3)))
-#ifdef CONFIG_SPARSE_RCU_POINTER
 # define __rcu		__attribute__((noderef, address_space(4)))
-#else /* CONFIG_SPARSE_RCU_POINTER */
-# define __rcu
-#endif /* CONFIG_SPARSE_RCU_POINTER */
 # define __private	__attribute__((noderef))
 extern void __chk_user_ptr(const volatile void __user *);
 extern void __chk_io_ptr(const volatile void __iomem *);

include/linux/rcu_node_tree.h

@@ -7,6 +7,10 @@
  * unlimited scalability while maintaining a constant level of contention
  * on the root node.
  *
+ * This seemingly RCU-private file must be available to SRCU users
+ * because the size of the TREE SRCU srcu_struct structure depends
+ * on these definitions.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or

include/linux/rcu_segcblist.h

 /*
  * RCU segmented callback lists
  *
+ * This seemingly RCU-private file must be available to SRCU users
+ * because the size of the TREE SRCU srcu_struct structure depends
+ * on these definitions.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or

include/linux/rcutiny.h

@@ -25,7 +25,7 @@
 #ifndef __LINUX_TINY_H
 #define __LINUX_TINY_H
 
-#include <linux/cache.h>
+#include <linux/ktime.h>
 
 struct rcu_dynticks;
 static inline int rcu_dynticks_snap(struct rcu_dynticks *rdtp)
@@ -33,10 +33,8 @@ static inline int rcu_dynticks_snap(struct rcu_dynticks *rdtp)
 	return 0;
 }
 
-static inline bool rcu_eqs_special_set(int cpu)
-{
-	return false;  /* Never flag non-existent other CPUs! */
-}
+/* Never flag non-existent other CPUs! */
+static inline bool rcu_eqs_special_set(int cpu) { return false; }
 
 static inline unsigned long get_state_synchronize_rcu(void)
 {
@@ -98,159 +96,38 @@ static inline void kfree_call_rcu(struct rcu_head *head,
 		rcu_note_voluntary_context_switch_lite(current); \
 	} while (0)
 
-/*
- * Take advantage of the fact that there is only one CPU, which
- * allows us to ignore virtualization-based context switches.
- */
-static inline void rcu_virt_note_context_switch(int cpu)
-{
-}
-
-/*
- * Return the number of grace periods started.
- */
-static inline unsigned long rcu_batches_started(void)
-{
-	return 0;
-}
-
-/*
- * Return the number of bottom-half grace periods started.
- */
-static inline unsigned long rcu_batches_started_bh(void)
-{
-	return 0;
-}
-
-/*
- * Return the number of sched grace periods started.
- */
-static inline unsigned long rcu_batches_started_sched(void)
-{
-	return 0;
-}
-
-/*
- * Return the number of grace periods completed.
- */
-static inline unsigned long rcu_batches_completed(void)
-{
-	return 0;
-}
-
-/*
- * Return the number of bottom-half grace periods completed.
- */
-static inline unsigned long rcu_batches_completed_bh(void)
-{
-	return 0;
-}
-
-/*
- * Return the number of sched grace periods completed.
- */
-static inline unsigned long rcu_batches_completed_sched(void)
+static inline int rcu_needs_cpu(u64 basemono, u64 *nextevt)
 {
+	*nextevt = KTIME_MAX;
 	return 0;
 }
 
 /*
- * Return the number of expedited grace periods completed.
- */
-static inline unsigned long rcu_exp_batches_completed(void)
-{
-	return 0;
-}
-
-/*
- * Return the number of expedited sched grace periods completed.
+ * Take advantage of the fact that there is only one CPU, which
+ * allows us to ignore virtualization-based context switches.
  */
-static inline unsigned long rcu_exp_batches_completed_sched(void)
-{
-	return 0;
-}
-
-static inline void rcu_force_quiescent_state(void)
-{
-}
-
-static inline void rcu_bh_force_quiescent_state(void)
-{
-}
-
-static inline void rcu_sched_force_quiescent_state(void)
-{
-}
-
-static inline void show_rcu_gp_kthreads(void)
-{
-}
-
-static inline void rcu_cpu_stall_reset(void)
-{
-}
-
-static inline void rcu_idle_enter(void)
-{
-}
-
-static inline void rcu_idle_exit(void)
-{
-}
-
-static inline void rcu_irq_enter(void)
-{
-}
-
-static inline void rcu_irq_exit_irqson(void)
-{
-}
-
-static inline void rcu_irq_enter_irqson(void)
-{
-}
-
-static inline void rcu_irq_exit(void)
-{
-}
-
-static inline void exit_rcu(void)
-{
-}
+static inline void rcu_virt_note_context_switch(int cpu) { }
+static inline void rcu_cpu_stall_reset(void) { }
+static inline void rcu_idle_enter(void) { }
+static inline void rcu_idle_exit(void) { }
+static inline void rcu_irq_enter(void) { }
+static inline bool rcu_irq_enter_disabled(void) { return false; }
+static inline void rcu_irq_exit_irqson(void) { }
+static inline void rcu_irq_enter_irqson(void) { }
+static inline void rcu_irq_exit(void) { }
+static inline void exit_rcu(void) { }
 
 #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SRCU)
 extern int rcu_scheduler_active __read_mostly;
 void rcu_scheduler_starting(void);
 #else /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SRCU) */
-static inline void rcu_scheduler_starting(void)
-{
-}
+static inline void rcu_scheduler_starting(void) { }
 #endif /* #else #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SRCU) */
+static inline void rcu_end_inkernel_boot(void) { }
+static inline bool rcu_is_watching(void) { return true; }
 
-#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE)
-
-static inline bool rcu_is_watching(void)
-{
-	return __rcu_is_watching();
-}
-
-#else /* defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
-
-static inline bool rcu_is_watching(void)
-{
-	return true;
-}
-
-#endif /* #else defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
-
-static inline void rcu_request_urgent_qs_task(struct task_struct *t)
-{
-}
-
-static inline void rcu_all_qs(void)
-{
-	barrier(); /* Avoid RCU read-side critical sections leaking across. */
-}
+/* Avoid RCU read-side critical sections leaking across. */
+static inline void rcu_all_qs(void) { barrier(); }
 
 /* RCUtree hotplug events */
 #define rcutree_prepare_cpu      NULL

include/linux/rcutree.h

@@ -79,37 +79,20 @@ void cond_synchronize_rcu(unsigned long oldstate);
 unsigned long get_state_synchronize_sched(void);
 void cond_synchronize_sched(unsigned long oldstate);
 
-extern unsigned long rcutorture_testseq;
-extern unsigned long rcutorture_vernum;
-unsigned long rcu_batches_started(void);
-unsigned long rcu_batches_started_bh(void);
-unsigned long rcu_batches_started_sched(void);
-unsigned long rcu_batches_completed(void);
-unsigned long rcu_batches_completed_bh(void);
-unsigned long rcu_batches_completed_sched(void);
-unsigned long rcu_exp_batches_completed(void);
-unsigned long rcu_exp_batches_completed_sched(void);
-void show_rcu_gp_kthreads(void);
-
-void rcu_force_quiescent_state(void);
-void rcu_bh_force_quiescent_state(void);
-void rcu_sched_force_quiescent_state(void);
-
 void rcu_idle_enter(void);
 void rcu_idle_exit(void);
 void rcu_irq_enter(void);
 void rcu_irq_exit(void);
 void rcu_irq_enter_irqson(void);
 void rcu_irq_exit_irqson(void);
+bool rcu_irq_enter_disabled(void);
 
 void exit_rcu(void);
 
 void rcu_scheduler_starting(void);
 extern int rcu_scheduler_active __read_mostly;
-
+void rcu_end_inkernel_boot(void);
 bool rcu_is_watching(void);
-void rcu_request_urgent_qs_task(struct task_struct *t);
-
 void rcu_all_qs(void);
 
 /* RCUtree hotplug events */

include/linux/spinlock.h

@@ -369,6 +369,26 @@ static __always_inline int spin_trylock_irq(spinlock_t *lock)
 	raw_spin_trylock_irqsave(spinlock_check(lock), flags); \
 })
 
+/**
+ * spin_unlock_wait - Interpose between successive critical sections
+ * @lock: the spinlock whose critical sections are to be interposed.
+ *
+ * Semantically this is equivalent to a spin_lock() immediately
+ * followed by a spin_unlock().  However, most architectures have
+ * more efficient implementations in which the spin_unlock_wait()
+ * cannot block concurrent lock acquisition, and in some cases
+ * where spin_unlock_wait() does not write to the lock variable.
+ * Nevertheless, spin_unlock_wait() can have high overhead, so if
+ * you feel the need to use it, please check to see if there is
+ * a better way to get your job done.
+ *
+ * The ordering guarantees provided by spin_unlock_wait() are:
+ *
+ * 1.  All accesses preceding the spin_unlock_wait() happen before
+ *     any accesses in later critical sections for this same lock.
+ * 2.  All accesses following the spin_unlock_wait() happen after
+ *     any accesses in earlier critical sections for this same lock.
+ */
 static __always_inline void spin_unlock_wait(spinlock_t *lock)
 {
 	raw_spin_unlock_wait(&lock->rlock);

include/linux/srcu.h

@@ -60,32 +60,15 @@ int init_srcu_struct(struct srcu_struct *sp);
 #include <linux/srcutiny.h>
 #elif defined(CONFIG_TREE_SRCU)
 #include <linux/srcutree.h>
-#elif defined(CONFIG_CLASSIC_SRCU)
-#include <linux/srcuclassic.h>
-#else
+#elif defined(CONFIG_SRCU)
 #error "Unknown SRCU implementation specified to kernel configuration"
+#else
+/* Dummy definition for things like notifiers.  Actual use gets link error. */
+struct srcu_struct { };
 #endif
 
-/**
- * call_srcu() - Queue a callback for invocation after an SRCU grace period
- * @sp: srcu_struct in queue the callback
- * @head: structure to be used for queueing the SRCU callback.
- * @func: function to be invoked after the SRCU grace period
- *
- * The callback function will be invoked some time after a full SRCU
- * grace period elapses, in other words after all pre-existing SRCU
- * read-side critical sections have completed.  However, the callback
- * function might well execute concurrently with other SRCU read-side
- * critical sections that started after call_srcu() was invoked.  SRCU
- * read-side critical sections are delimited by srcu_read_lock() and
- * srcu_read_unlock(), and may be nested.
- *
- * The callback will be invoked from process context, but must nevertheless
- * be fast and must not block.
- */
 void call_srcu(struct srcu_struct *sp, struct rcu_head *head,
 		void (*func)(struct rcu_head *head));
-
 void cleanup_srcu_struct(struct srcu_struct *sp);
 int __srcu_read_lock(struct srcu_struct *sp) __acquires(sp);
 void __srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp);

include/linux/srcuclassic.h

-/*
- * Sleepable Read-Copy Update mechanism for mutual exclusion,
- *	classic v4.11 variant.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, you can access it online at
- * http://www.gnu.org/licenses/gpl-2.0.html.
- *
- * Copyright (C) IBM Corporation, 2017
- *
- * Author: Paul McKenney <paulmck@us.ibm.com>
- */
-
-#ifndef _LINUX_SRCU_CLASSIC_H
-#define _LINUX_SRCU_CLASSIC_H
-
-struct srcu_array {
-	unsigned long lock_count[2];
-	unsigned long unlock_count[2];
-};
-
-struct rcu_batch {
-	struct rcu_head *head, **tail;
-};
-
-#define RCU_BATCH_INIT(name) { NULL, &(name.head) }
-
-struct srcu_struct {
-	unsigned long completed;
-	struct srcu_array __percpu *per_cpu_ref;
-	spinlock_t queue_lock; /* protect ->batch_queue, ->running */
-	bool running;
-	/* callbacks just queued */
-	struct rcu_batch batch_queue;
-	/* callbacks try to do the first check_zero */
-	struct rcu_batch batch_check0;
-	/* callbacks done with the first check_zero and the flip */
-	struct rcu_batch batch_check1;
-	struct rcu_batch batch_done;
-	struct delayed_work work;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map dep_map;
-#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-};
-
-void process_srcu(struct work_struct *work);
-
-#define __SRCU_STRUCT_INIT(name)					\
-	{								\
-		.completed = -300,					\
-		.per_cpu_ref = &name##_srcu_array,			\
-		.queue_lock = __SPIN_LOCK_UNLOCKED(name.queue_lock),	\
-		.running = false,					\
-		.batch_queue = RCU_BATCH_INIT(name.batch_queue),	\
-		.batch_check0 = RCU_BATCH_INIT(name.batch_check0),	\
-		.batch_check1 = RCU_BATCH_INIT(name.batch_check1),	\
-		.batch_done = RCU_BATCH_INIT(name.batch_done),		\
-		.work = __DELAYED_WORK_INITIALIZER(name.work, process_srcu, 0),\
-		__SRCU_DEP_MAP_INIT(name)				\
-	}
-
-/*
- * Define and initialize a srcu struct at build time.
- * Do -not- call init_srcu_struct() nor cleanup_srcu_struct() on it.
- *
- * Note that although DEFINE_STATIC_SRCU() hides the name from other
- * files, the per-CPU variable rules nevertheless require that the
- * chosen name be globally unique.  These rules also prohibit use of
- * DEFINE_STATIC_SRCU() within a function.  If these rules are too
- * restrictive, declare the srcu_struct manually.  For example, in
- * each file:
- *
- *	static struct srcu_struct my_srcu;
- *
- * Then, before the first use of each my_srcu, manually initialize it:
- *
- *	init_srcu_struct(&my_srcu);
- *
- * See include/linux/percpu-defs.h for the rules on per-CPU variables.
- */
-#define __DEFINE_SRCU(name, is_static)					\
-	static DEFINE_PER_CPU(struct srcu_array, name##_srcu_array);\
-	is_static struct srcu_struct name = __SRCU_STRUCT_INIT(name)
-#define DEFINE_SRCU(name)		__DEFINE_SRCU(name, /* not static */)
-#define DEFINE_STATIC_SRCU(name)	__DEFINE_SRCU(name, static)
-
-void synchronize_srcu_expedited(struct srcu_struct *sp);
-void srcu_barrier(struct srcu_struct *sp);
-unsigned long srcu_batches_completed(struct srcu_struct *sp);
-
-static inline void srcutorture_get_gp_data(enum rcutorture_type test_type,
-					   struct srcu_struct *sp, int *flags,
-					   unsigned long *gpnum,
-					   unsigned long *completed)
-{
-	if (test_type != SRCU_FLAVOR)
-		return;
-	*flags = 0;
-	*completed = sp->completed;
-	*gpnum = *completed;
-	if (sp->batch_queue.head || sp->batch_check0.head || sp->batch_check0.head)
-		(*gpnum)++;
-}
-
-#endif

include/linux/srcutiny.h

@@ -27,15 +27,14 @@
 #include <linux/swait.h>
 
 struct srcu_struct {
-	int srcu_lock_nesting[2];	/* srcu_read_lock() nesting depth. */
+	short srcu_lock_nesting[2];	/* srcu_read_lock() nesting depth. */
+	short srcu_idx;			/* Current reader array element. */
+	u8 srcu_gp_running;		/* GP workqueue running? */
+	u8 srcu_gp_waiting;		/* GP waiting for readers? */
 	struct swait_queue_head srcu_wq;
 					/* Last srcu_read_unlock() wakes GP. */
-	unsigned long srcu_gp_seq;	/* GP seq # for callback tagging. */
-	struct rcu_segcblist srcu_cblist;
-					/* Pending SRCU callbacks. */
-	int srcu_idx;			/* Current reader array element. */
-	bool srcu_gp_running;		/* GP workqueue running? */
-	bool srcu_gp_waiting;		/* GP waiting for readers? */
+	struct rcu_head *srcu_cb_head;	/* Pending callbacks: Head. */
+	struct rcu_head **srcu_cb_tail;	/* Pending callbacks: Tail. */
 	struct work_struct srcu_work;	/* For driving grace periods. */
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 	struct lockdep_map dep_map;
@@ -47,7 +46,7 @@ void srcu_drive_gp(struct work_struct *wp);
 #define __SRCU_STRUCT_INIT(name)					\
 {									\
 	.srcu_wq = __SWAIT_QUEUE_HEAD_INITIALIZER(name.srcu_wq),	\
-	.srcu_cblist = RCU_SEGCBLIST_INITIALIZER(name.srcu_cblist),	\
+	.srcu_cb_tail = &name.srcu_cb_head,				\
 	.srcu_work = __WORK_INITIALIZER(name.srcu_work, srcu_drive_gp),	\
 	__SRCU_DEP_MAP_INIT(name)					\
 }
@@ -63,31 +62,29 @@ void srcu_drive_gp(struct work_struct *wp);
 
 void synchronize_srcu(struct srcu_struct *sp);
 
-static inline void synchronize_srcu_expedited(struct srcu_struct *sp)
+/*
+ * Counts the new reader in the appropriate per-CPU element of the
+ * srcu_struct.  Can be invoked from irq/bh handlers, but the matching
+ * __srcu_read_unlock() must be in the same handler instance.  Returns an
+ * index that must be passed to the matching srcu_read_unlock().
+ */
+static inline int __srcu_read_lock(struct srcu_struct *sp)
 {
-	synchronize_srcu(sp);
-}
+	int idx;
 
-static inline void srcu_barrier(struct srcu_struct *sp)
-{
-	synchronize_srcu(sp);
+	idx = READ_ONCE(sp->srcu_idx);
+	WRITE_ONCE(sp->srcu_lock_nesting[idx], sp->srcu_lock_nesting[idx] + 1);
+	return idx;
 }
 
-static inline unsigned long srcu_batches_completed(struct srcu_struct *sp)
+static inline void synchronize_srcu_expedited(struct srcu_struct *sp)
 {
-	return 0;
+	synchronize_srcu(sp);
 }
 
-static inline void srcutorture_get_gp_data(enum rcutorture_type test_type,
-					   struct srcu_struct *sp, int *flags,
-					   unsigned long *gpnum,
-					   unsigned long *completed)
+static inline void srcu_barrier(struct srcu_struct *sp)
 {
-	if (test_type != SRCU_FLAVOR)
-		return;
-	*flags = 0;
-	*completed = sp->srcu_gp_seq;
-	*gpnum = *completed;
+	synchronize_srcu(sp);
 }
 
 #endif

include/linux/srcutree.h

@@ -40,7 +40,7 @@ struct srcu_data {
 	unsigned long srcu_unlock_count[2];	/* Unlocks per CPU. */
 
 	/* Update-side state. */
-	spinlock_t lock ____cacheline_internodealigned_in_smp;
+	raw_spinlock_t __private lock ____cacheline_internodealigned_in_smp;
 	struct rcu_segcblist srcu_cblist;	/* List of callbacks.*/
 	unsigned long srcu_gp_seq_needed;	/* Furthest future GP needed. */
 	unsigned long srcu_gp_seq_needed_exp;	/* Furthest future exp GP. */
@@ -58,7 +58,7 @@ struct srcu_data {
  * Node in SRCU combining tree, similar in function to rcu_data.
  */
 struct srcu_node {
-	spinlock_t lock;
+	raw_spinlock_t __private lock;
 	unsigned long srcu_have_cbs[4];		/* GP seq for children */
 						/*  having CBs, but only */
 						/*  is > ->srcu_gq_seq. */
@@ -78,7 +78,7 @@ struct srcu_struct {
 	struct srcu_node *level[RCU_NUM_LVLS + 1];
 						/* First node at each level. */
 	struct mutex srcu_cb_mutex;		/* Serialize CB preparation. */
-	spinlock_t gp_lock;			/* protect ->srcu_cblist */
+	raw_spinlock_t __private lock;		/* Protect counters */
 	struct mutex srcu_gp_mutex;		/* Serialize GP work. */
 	unsigned int srcu_idx;			/* Current rdr array element. */
 	unsigned long srcu_gp_seq;		/* Grace-period seq #. */
@@ -109,7 +109,7 @@ void process_srcu(struct work_struct *work);
 #define __SRCU_STRUCT_INIT(name)					\
 	{								\
 		.sda = &name##_srcu_data,				\
-		.gp_lock = __SPIN_LOCK_UNLOCKED(name.gp_lock),		\
+		.lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock),		\
 		.srcu_gp_seq_needed = 0 - 1,				\
 		__SRCU_DEP_MAP_INIT(name)				\
 	}
@@ -141,10 +141,5 @@ void process_srcu(struct work_struct *work);
 
 void synchronize_srcu_expedited(struct srcu_struct *sp);
 void srcu_barrier(struct srcu_struct *sp);
-unsigned long srcu_batches_completed(struct srcu_struct *sp);
-
-void srcutorture_get_gp_data(enum rcutorture_type test_type,
-			     struct srcu_struct *sp, int *flags,
-			     unsigned long *gpnum, unsigned long *completed);
 
 #endif

include/trace/events/rcu.h

@@ -742,6 +742,7 @@ TRACE_EVENT(rcu_torture_read,
  *	"OnlineQ": _rcu_barrier() found online CPU with callbacks.
  *	"OnlineNQ": _rcu_barrier() found online CPU, no callbacks.
  *	"IRQ": An rcu_barrier_callback() callback posted on remote CPU.
+ *	"IRQNQ": An rcu_barrier_callback() callback found no callbacks.
  *	"CB": An rcu_barrier_callback() invoked a callback, not the last.
  *	"LastCB": An rcu_barrier_callback() invoked the last callback.
  *	"Inc2": _rcu_barrier() piggyback check counter incremented.

kernel/rcu/Kconfig

+#
+# RCU-related configuration options
+#
+
+menu "RCU Subsystem"
+
+config TREE_RCU
+	bool
+	default y if !PREEMPT && SMP
+	help
+	  This option selects the RCU implementation that is
+	  designed for very large SMP system with hundreds or
+	  thousands of CPUs.  It also scales down nicely to
+	  smaller systems.
+
+config PREEMPT_RCU
+	bool
+	default y if PREEMPT
+	help
+	  This option selects the RCU implementation that is
+	  designed for very large SMP systems with hundreds or
+	  thousands of CPUs, but for which real-time response
+	  is also required.  It also scales down nicely to
+	  smaller systems.
+
+	  Select this option if you are unsure.
+
+config TINY_RCU
+	bool
+	default y if !PREEMPT && !SMP
+	help
+	  This option selects the RCU implementation that is
+	  designed for UP systems from which real-time response
+	  is not required.  This option greatly reduces the
+	  memory footprint of RCU.
+
+config RCU_EXPERT
+	bool "Make expert-level adjustments to RCU configuration"
+	default n
+	help
+	  This option needs to be enabled if you wish to make
+	  expert-level adjustments to RCU configuration.  By default,
+	  no such adjustments can be made, which has the often-beneficial
+	  side-effect of preventing "make oldconfig" from asking you all
+	  sorts of detailed questions about how you would like numerous
+	  obscure RCU options to be set up.
+
+	  Say Y if you need to make expert-level adjustments to RCU.
+
+	  Say N if you are unsure.
+
+config SRCU
+	bool
+	help
+	  This option selects the sleepable version of RCU. This version
+	  permits arbitrary sleeping or blocking within RCU read-side critical
+	  sections.
+
+config TINY_SRCU
+	bool
+	default y if SRCU && TINY_RCU
+	help
+	  This option selects the single-CPU non-preemptible version of SRCU.
+
+config TREE_SRCU
+	bool
+	default y if SRCU && !TINY_RCU
+	help
+	  This option selects the full-fledged version of SRCU.
+
+config TASKS_RCU
+	bool
+	default n
+	select SRCU
+	help
+	  This option enables a task-based RCU implementation that uses
+	  only voluntary context switch (not preemption!), idle, and
+	  user-mode execution as quiescent states.
+
+config RCU_STALL_COMMON
+	def_bool ( TREE_RCU || PREEMPT_RCU )
+	help
+	  This option enables RCU CPU stall code that is common between
+	  the TINY and TREE variants of RCU.  The purpose is to allow
+	  the tiny variants to disable RCU CPU stall warnings, while
+	  making these warnings mandatory for the tree variants.
+
+config RCU_NEED_SEGCBLIST
+	def_bool ( TREE_RCU || PREEMPT_RCU || TREE_SRCU )
+
+config CONTEXT_TRACKING
+       bool
+
+config CONTEXT_TRACKING_FORCE
+	bool "Force context tracking"
+	depends on CONTEXT_TRACKING
+	default y if !NO_HZ_FULL
+	help
+	  The major pre-requirement for full dynticks to work is to
+	  support the context tracking subsystem. But there are also
+	  other dependencies to provide in order to make the full
+	  dynticks working.
+
+	  This option stands for testing when an arch implements the
+	  context tracking backend but doesn't yet fullfill all the
+	  requirements to make the full dynticks feature working.
+	  Without the full dynticks, there is no way to test the support
+	  for context tracking and the subsystems that rely on it: RCU
+	  userspace extended quiescent state and tickless cputime
+	  accounting. This option copes with the absence of the full
+	  dynticks subsystem by forcing the context tracking on all
+	  CPUs in the system.
+
+	  Say Y only if you're working on the development of an
+	  architecture backend for the context tracking.
+
+	  Say N otherwise, this option brings an overhead that you
+	  don't want in production.
+
+
+config RCU_FANOUT
+	int "Tree-based hierarchical RCU fanout value"
+	range 2 64 if 64BIT
+	range 2 32 if !64BIT
+	depends on (TREE_RCU || PREEMPT_RCU) && RCU_EXPERT
+	default 64 if 64BIT
+	default 32 if !64BIT
+	help
+	  This option controls the fanout of hierarchical implementations
+	  of RCU, allowing RCU to work efficiently on machines with
+	  large numbers of CPUs.  This value must be at least the fourth
+	  root of NR_CPUS, which allows NR_CPUS to be insanely large.
+	  The default value of RCU_FANOUT should be used for production
+	  systems, but if you are stress-testing the RCU implementation
+	  itself, small RCU_FANOUT values allow you to test large-system
+	  code paths on small(er) systems.
+
+	  Select a specific number if testing RCU itself.
+	  Take the default if unsure.
+
+config RCU_FANOUT_LEAF
+	int "Tree-based hierarchical RCU leaf-level fanout value"
+	range 2 64 if 64BIT
+	range 2 32 if !64BIT
+	depends on (TREE_RCU || PREEMPT_RCU) && RCU_EXPERT
+	default 16
+	help
+	  This option controls the leaf-level fanout of hierarchical
+	  implementations of RCU, and allows trading off cache misses
+	  against lock contention.  Systems that synchronize their
+	  scheduling-clock interrupts for energy-efficiency reasons will
+	  want the default because the smaller leaf-level fanout keeps
+	  lock contention levels acceptably low.  Very large systems
+	  (hundreds or thousands of CPUs) will instead want to set this
+	  value to the maximum value possible in order to reduce the
+	  number of cache misses incurred during RCU's grace-period
+	  initialization.  These systems tend to run CPU-bound, and thus
+	  are not helped by synchronized interrupts, and thus tend to
+	  skew them, which reduces lock contention enough that large
+	  leaf-level fanouts work well.  That said, setting leaf-level
+	  fanout to a large number will likely cause problematic
+	  lock contention on the leaf-level rcu_node structures unless
+	  you boot with the skew_tick kernel parameter.
+
+	  Select a specific number if testing RCU itself.
+
+	  Select the maximum permissible value for large systems, but
+	  please understand that you may also need to set the skew_tick
+	  kernel boot parameter to avoid contention on the rcu_node
+	  structure's locks.
+
+	  Take the default if unsure.
+
+config RCU_FAST_NO_HZ
+	bool "Accelerate last non-dyntick-idle CPU's grace periods"
+	depends on NO_HZ_COMMON && SMP && RCU_EXPERT
+	default n
+	help
+	  This option permits CPUs to enter dynticks-idle state even if
+	  they have RCU callbacks queued, and prevents RCU from waking
+	  these CPUs up more than roughly once every four jiffies (by
+	  default, you can adjust this using the rcutree.rcu_idle_gp_delay
+	  parameter), thus improving energy efficiency.  On the other
+	  hand, this option increases the duration of RCU grace periods,
+	  for example, slowing down synchronize_rcu().
+
+	  Say Y if energy efficiency is critically important, and you
+	  	don't care about increased grace-period durations.
+
+	  Say N if you are unsure.
+
+config RCU_BOOST
+	bool "Enable RCU priority boosting"
+	depends on RT_MUTEXES && PREEMPT_RCU && RCU_EXPERT
+	default n
+	help
+	  This option boosts the priority of preempted RCU readers that
+	  block the current preemptible RCU grace period for too long.
+	  This option also prevents heavy loads from blocking RCU
+	  callback invocation for all flavors of RCU.
+
+	  Say Y here if you are working with real-time apps or heavy loads
+	  Say N here if you are unsure.
+
+config RCU_BOOST_DELAY
+	int "Milliseconds to delay boosting after RCU grace-period start"
+	range 0 3000
+	depends on RCU_BOOST
+	default 500
+	help
+	  This option specifies the time to wait after the beginning of
+	  a given grace period before priority-boosting preempted RCU
+	  readers blocking that grace period.  Note that any RCU reader
+	  blocking an expedited RCU grace period is boosted immediately.
+
+	  Accept the default if unsure.
+
+config RCU_NOCB_CPU
+	bool "Offload RCU callback processing from boot-selected CPUs"
+	depends on TREE_RCU || PREEMPT_RCU
+	depends on RCU_EXPERT || NO_HZ_FULL
+	default n
+	help
+	  Use this option to reduce OS jitter for aggressive HPC or
+	  real-time workloads.	It can also be used to offload RCU
+	  callback invocation to energy-efficient CPUs in battery-powered
+	  asymmetric multiprocessors.
+
+	  This option offloads callback invocation from the set of
+	  CPUs specified at boot time by the rcu_nocbs parameter.
+	  For each such CPU, a kthread ("rcuox/N") will be created to
+	  invoke callbacks, where the "N" is the CPU being offloaded,
+	  and where the "x" is "b" for RCU-bh, "p" for RCU-preempt, and
+	  "s" for RCU-sched.  Nothing prevents this kthread from running
+	  on the specified CPUs, but (1) the kthreads may be preempted
+	  between each callback, and (2) affinity or cgroups can be used
+	  to force the kthreads to run on whatever set of CPUs is desired.
+
+	  Say Y here if you want to help to debug reduced OS jitter.
+	  Say N here if you are unsure.
+
+endmenu # "RCU Subsystem"

kernel/rcu/Kconfig.debug

+#
+# RCU-related debugging configuration options
+#
+
+menu "RCU Debugging"
+
+config PROVE_RCU
+	def_bool PROVE_LOCKING
+
+config TORTURE_TEST
+	tristate
+	default n
+
+config RCU_PERF_TEST
+	tristate "performance tests for RCU"
+	depends on DEBUG_KERNEL
+	select TORTURE_TEST
+	select SRCU
+	select TASKS_RCU
+	default n
+	help
+	  This option provides a kernel module that runs performance
+	  tests on the RCU infrastructure.  The kernel module may be built
+	  after the fact on the running kernel to be tested, if desired.
+
+	  Say Y here if you want RCU performance tests to be built into
+	  the kernel.
+	  Say M if you want the RCU performance tests to build as a module.
+	  Say N if you are unsure.
+
+config RCU_TORTURE_TEST
+	tristate "torture tests for RCU"
+	depends on DEBUG_KERNEL
+	select TORTURE_TEST
+	select SRCU
+	select TASKS_RCU
+	default n
+	help
+	  This option provides a kernel module that runs torture tests
+	  on the RCU infrastructure.  The kernel module may be built
+	  after the fact on the running kernel to be tested, if desired.
+
+	  Say Y here if you want RCU torture tests to be built into
+	  the kernel.
+	  Say M if you want the RCU torture tests to build as a module.
+	  Say N if you are unsure.
+
+config RCU_CPU_STALL_TIMEOUT
+	int "RCU CPU stall timeout in seconds"
+	depends on RCU_STALL_COMMON
+	range 3 300
+	default 21
+	help
+	  If a given RCU grace period extends more than the specified
+	  number of seconds, a CPU stall warning is printed.  If the
+	  RCU grace period persists, additional CPU stall warnings are
+	  printed at more widely spaced intervals.
+
+config RCU_TRACE
+	bool "Enable tracing for RCU"
+	depends on DEBUG_KERNEL
+	default y if TREE_RCU
+	select TRACE_CLOCK
+	help
+	  This option enables additional tracepoints for ftrace-style
+	  event tracing.
+
+	  Say Y here if you want to enable RCU tracing
+	  Say N if you are unsure.
+
+config RCU_EQS_DEBUG
+	bool "Provide debugging asserts for adding NO_HZ support to an arch"
+	depends on DEBUG_KERNEL
+	help
+	  This option provides consistency checks in RCU's handling of
+	  NO_HZ.  These checks have proven quite helpful in detecting
+	  bugs in arch-specific NO_HZ code.
+
+	  Say N here if you need ultimate kernel/user switch latencies
+	  Say Y if you are unsure
+
+endmenu # "RCU Debugging"

kernel/rcu/Makefile

@@ -3,13 +3,11 @@
 KCOV_INSTRUMENT := n
 
 obj-y += update.o sync.o
-obj-$(CONFIG_CLASSIC_SRCU) += srcu.o
 obj-$(CONFIG_TREE_SRCU) += srcutree.o
 obj-$(CONFIG_TINY_SRCU) += srcutiny.o
 obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
 obj-$(CONFIG_RCU_PERF_TEST) += rcuperf.o
 obj-$(CONFIG_TREE_RCU) += tree.o
 obj-$(CONFIG_PREEMPT_RCU) += tree.o
-obj-$(CONFIG_TREE_RCU_TRACE) += tree_trace.o
 obj-$(CONFIG_TINY_RCU) += tiny.o
 obj-$(CONFIG_RCU_NEED_SEGCBLIST) += rcu_segcblist.o

kernel/rcu/rcu.h

@@ -212,6 +212,18 @@ int rcu_jiffies_till_stall_check(void);
  */
 #define TPS(x)  tracepoint_string(x)
 
+/*
+ * Dump the ftrace buffer, but only one time per callsite per boot.
+ */
+#define rcu_ftrace_dump(oops_dump_mode) \
+do { \
+	static atomic_t ___rfd_beenhere = ATOMIC_INIT(0); \
+	\
+	if (!atomic_read(&___rfd_beenhere) && \
+	    !atomic_xchg(&___rfd_beenhere, 1)) \
+		ftrace_dump(oops_dump_mode); \
+} while (0)
+
 void rcu_early_boot_tests(void);
 void rcu_test_sync_prims(void);
 
@@ -291,6 +303,271 @@ static inline void rcu_init_levelspread(int *levelspread, const int *levelcnt)
 	     cpu <= rnp->grphi; \
 	     cpu = cpumask_next((cpu), cpu_possible_mask))
 
+/*
+ * Wrappers for the rcu_node::lock acquire and release.
+ *
+ * Because the rcu_nodes form a tree, the tree traversal locking will observe
+ * different lock values, this in turn means that an UNLOCK of one level
+ * followed by a LOCK of another level does not imply a full memory barrier;
+ * and most importantly transitivity is lost.
+ *
+ * In order to restore full ordering between tree levels, augment the regular
+ * lock acquire functions with smp_mb__after_unlock_lock().
+ *
+ * As ->lock of struct rcu_node is a __private field, therefore one should use
+ * these wrappers rather than directly call raw_spin_{lock,unlock}* on ->lock.
+ */
+#define raw_spin_lock_rcu_node(p)					\
+do {									\
+	raw_spin_lock(&ACCESS_PRIVATE(p, lock));			\
+	smp_mb__after_unlock_lock();					\
+} while (0)
+
+#define raw_spin_unlock_rcu_node(p) raw_spin_unlock(&ACCESS_PRIVATE(p, lock))
+
+#define raw_spin_lock_irq_rcu_node(p)					\
+do {									\
+	raw_spin_lock_irq(&ACCESS_PRIVATE(p, lock));			\
+	smp_mb__after_unlock_lock();					\
+} while (0)
+
+#define raw_spin_unlock_irq_rcu_node(p)					\
+	raw_spin_unlock_irq(&ACCESS_PRIVATE(p, lock))
+
+#define raw_spin_lock_irqsave_rcu_node(p, flags)			\
+do {									\
+	raw_spin_lock_irqsave(&ACCESS_PRIVATE(p, lock), flags);	\
+	smp_mb__after_unlock_lock();					\
+} while (0)
+
+#define raw_spin_unlock_irqrestore_rcu_node(p, flags)			\
+	raw_spin_unlock_irqrestore(&ACCESS_PRIVATE(p, lock), flags)	\
+
+#define raw_spin_trylock_rcu_node(p)					\
+({									\
+	bool ___locked = raw_spin_trylock(&ACCESS_PRIVATE(p, lock));	\
+									\
+	if (___locked)							\
+		smp_mb__after_unlock_lock();				\
+	___locked;							\
+})
+
 #endif /* #if defined(SRCU) || !defined(TINY_RCU) */
 
+#ifdef CONFIG_TINY_RCU
+/* Tiny RCU doesn't expedite, as its purpose in life is instead to be tiny. */
+static inline bool rcu_gp_is_normal(void)  /* Internal RCU use. */
+{
+	return true;
+}
+static inline bool rcu_gp_is_expedited(void)  /* Internal RCU use. */
+{
+	return false;
+}
+
+static inline void rcu_expedite_gp(void)
+{
+}
+
+static inline void rcu_unexpedite_gp(void)
+{
+}
+#else /* #ifdef CONFIG_TINY_RCU */
+bool rcu_gp_is_normal(void);     /* Internal RCU use. */
+bool rcu_gp_is_expedited(void);  /* Internal RCU use. */
+void rcu_expedite_gp(void);
+void rcu_unexpedite_gp(void);
+void rcupdate_announce_bootup_oddness(void);
+#endif /* #else #ifdef CONFIG_TINY_RCU */
+
+#define RCU_SCHEDULER_INACTIVE	0
+#define RCU_SCHEDULER_INIT	1
+#define RCU_SCHEDULER_RUNNING	2
+
+#ifdef CONFIG_TINY_RCU
+static inline void rcu_request_urgent_qs_task(struct task_struct *t) { }
+#else /* #ifdef CONFIG_TINY_RCU */
+void rcu_request_urgent_qs_task(struct task_struct *t);
+#endif /* #else #ifdef CONFIG_TINY_RCU */
+
+enum rcutorture_type {
+	RCU_FLAVOR,
+	RCU_BH_FLAVOR,
+	RCU_SCHED_FLAVOR,
+	RCU_TASKS_FLAVOR,
+	SRCU_FLAVOR,
+	INVALID_RCU_FLAVOR
+};
+
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
+void rcutorture_get_gp_data(enum rcutorture_type test_type, int *flags,
+			    unsigned long *gpnum, unsigned long *completed);
+void rcutorture_record_test_transition(void);
+void rcutorture_record_progress(unsigned long vernum);
+void do_trace_rcu_torture_read(const char *rcutorturename,
+			       struct rcu_head *rhp,
+			       unsigned long secs,
+			       unsigned long c_old,
+			       unsigned long c);
+#else
+static inline void rcutorture_get_gp_data(enum rcutorture_type test_type,
+					  int *flags,
+					  unsigned long *gpnum,
+					  unsigned long *completed)
+{
+	*flags = 0;
+	*gpnum = 0;
+	*completed = 0;
+}
+static inline void rcutorture_record_test_transition(void)
+{
+}
+static inline void rcutorture_record_progress(unsigned long vernum)
+{
+}
+#ifdef CONFIG_RCU_TRACE
+void do_trace_rcu_torture_read(const char *rcutorturename,
+			       struct rcu_head *rhp,
+			       unsigned long secs,
+			       unsigned long c_old,
+			       unsigned long c);
+#else
+#define do_trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \
+	do { } while (0)
+#endif
+#endif
+
+#ifdef CONFIG_TINY_SRCU
+
+static inline void srcutorture_get_gp_data(enum rcutorture_type test_type,
+					   struct srcu_struct *sp, int *flags,
+					   unsigned long *gpnum,
+					   unsigned long *completed)
+{
+	if (test_type != SRCU_FLAVOR)
+		return;
+	*flags = 0;
+	*completed = sp->srcu_idx;
+	*gpnum = *completed;
+}
+
+#elif defined(CONFIG_TREE_SRCU)
+
+void srcutorture_get_gp_data(enum rcutorture_type test_type,
+			     struct srcu_struct *sp, int *flags,
+			     unsigned long *gpnum, unsigned long *completed);
+
+#endif
+
+#ifdef CONFIG_TINY_RCU
+
+/*
+ * Return the number of grace periods started.
+ */
+static inline unsigned long rcu_batches_started(void)
+{
+	return 0;
+}
+
+/*
+ * Return the number of bottom-half grace periods started.
+ */
+static inline unsigned long rcu_batches_started_bh(void)
+{
+	return 0;
+}
+
+/*
+ * Return the number of sched grace periods started.
+ */
+static inline unsigned long rcu_batches_started_sched(void)
+{
+	return 0;
+}
+
+/*
+ * Return the number of grace periods completed.
+ */
+static inline unsigned long rcu_batches_completed(void)
+{
+	return 0;
+}
+
+/*
+ * Return the number of bottom-half grace periods completed.
+ */
+static inline unsigned long rcu_batches_completed_bh(void)
+{
+	return 0;
+}
+
+/*
+ * Return the number of sched grace periods completed.
+ */
+static inline unsigned long rcu_batches_completed_sched(void)
+{
+	return 0;
+}
+
+/*
+ * Return the number of expedited grace periods completed.
+ */
+static inline unsigned long rcu_exp_batches_completed(void)
+{
+	return 0;
+}
+
+/*
+ * Return the number of expedited sched grace periods completed.
+ */
+static inline unsigned long rcu_exp_batches_completed_sched(void)
+{
+	return 0;
+}
+
+static inline unsigned long srcu_batches_completed(struct srcu_struct *sp)
+{
+	return 0;
+}
+
+static inline void rcu_force_quiescent_state(void)
+{
+}
+
+static inline void rcu_bh_force_quiescent_state(void)
+{
+}
+
+static inline void rcu_sched_force_quiescent_state(void)
+{
+}
+
+static inline void show_rcu_gp_kthreads(void)
+{
+}
+
+#else /* #ifdef CONFIG_TINY_RCU */
+extern unsigned long rcutorture_testseq;
+extern unsigned long rcutorture_vernum;
+unsigned long rcu_batches_started(void);
+unsigned long rcu_batches_started_bh(void);
+unsigned long rcu_batches_started_sched(void);
+unsigned long rcu_batches_completed(void);
+unsigned long rcu_batches_completed_bh(void);
+unsigned long rcu_batches_completed_sched(void);
+unsigned long rcu_exp_batches_completed(void);
+unsigned long rcu_exp_batches_completed_sched(void);
+unsigned long srcu_batches_completed(struct srcu_struct *sp);
+void show_rcu_gp_kthreads(void);
+void rcu_force_quiescent_state(void);
+void rcu_bh_force_quiescent_state(void);
+void rcu_sched_force_quiescent_state(void);
+#endif /* #else #ifdef CONFIG_TINY_RCU */
+
+#ifdef CONFIG_RCU_NOCB_CPU
+bool rcu_is_nocb_cpu(int cpu);
+#else
+static inline bool rcu_is_nocb_cpu(int cpu) { return false; }
+#endif
+
 #endif /* __LINUX_RCU_H */

kernel/rcu/rcuperf.c

@@ -48,6 +48,8 @@
 #include <linux/torture.h>
 #include <linux/vmalloc.h>
 
+#include "rcu.h"
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Paul E. McKenney <paulmck@linux.vnet.ibm.com>");
 
@@ -59,12 +61,16 @@ MODULE_AUTHOR("Paul E. McKenney <paulmck@linux.vnet.ibm.com>");
 #define VERBOSE_PERFOUT_ERRSTRING(s) \
 	do { if (verbose) pr_alert("%s" PERF_FLAG "!!! %s\n", perf_type, s); } while (0)
 
+torture_param(bool, gp_async, false, "Use asynchronous GP wait primitives");
+torture_param(int, gp_async_max, 1000, "Max # outstanding waits per reader");
 torture_param(bool, gp_exp, false, "Use expedited GP wait primitives");
 torture_param(int, holdoff, 10, "Holdoff time before test start (s)");
-torture_param(int, nreaders, -1, "Number of RCU reader threads");
+torture_param(int, nreaders, 0, "Number of RCU reader threads");
 torture_param(int, nwriters, -1, "Number of RCU updater threads");
-torture_param(bool, shutdown, false, "Shutdown at end of performance tests.");
+torture_param(bool, shutdown, !IS_ENABLED(MODULE),
+	      "Shutdown at end of performance tests.");
 torture_param(bool, verbose, true, "Enable verbose debugging printk()s");
+torture_param(int, writer_holdoff, 0, "Holdoff (us) between GPs, zero to disable");
 
 static char *perf_type = "rcu";
 module_param(perf_type, charp, 0444);
@@ -86,13 +92,16 @@ static u64 t_rcu_perf_writer_started;
 static u64 t_rcu_perf_writer_finished;
 static unsigned long b_rcu_perf_writer_started;
 static unsigned long b_rcu_perf_writer_finished;
+static DEFINE_PER_CPU(atomic_t, n_async_inflight);
 
 static int rcu_perf_writer_state;
 #define RTWS_INIT		0
-#define RTWS_EXP_SYNC		1
-#define RTWS_SYNC		2
-#define RTWS_IDLE		2
-#define RTWS_STOPPING		3
+#define RTWS_ASYNC		1
+#define RTWS_BARRIER		2
+#define RTWS_EXP_SYNC		3
+#define RTWS_SYNC		4
+#define RTWS_IDLE		5
+#define RTWS_STOPPING		6
 
 #define MAX_MEAS 10000
 #define MIN_MEAS 100
@@ -114,6 +123,8 @@ struct rcu_perf_ops {
 	unsigned long (*started)(void);
 	unsigned long (*completed)(void);
 	unsigned long (*exp_completed)(void);
+	void (*async)(struct rcu_head *head, rcu_callback_t func);
+	void (*gp_barrier)(void);
 	void (*sync)(void);
 	void (*exp_sync)(void);
 	const char *name;
@@ -153,6 +164,8 @@ static struct rcu_perf_ops rcu_ops = {
 	.started	= rcu_batches_started,
 	.completed	= rcu_batches_completed,
 	.exp_completed	= rcu_exp_batches_completed,
+	.async		= call_rcu,
+	.gp_barrier	= rcu_barrier,
 	.sync		= synchronize_rcu,
 	.exp_sync	= synchronize_rcu_expedited,
 	.name		= "rcu"
@@ -181,6 +194,8 @@ static struct rcu_perf_ops rcu_bh_ops = {
 	.started	= rcu_batches_started_bh,
 	.completed	= rcu_batches_completed_bh,
 	.exp_completed	= rcu_exp_batches_completed_sched,
+	.async		= call_rcu_bh,
+	.gp_barrier	= rcu_barrier_bh,
 	.sync		= synchronize_rcu_bh,
 	.exp_sync	= synchronize_rcu_bh_expedited,
 	.name		= "rcu_bh"
@@ -208,6 +223,16 @@ static unsigned long srcu_perf_completed(void)
 	return srcu_batches_completed(srcu_ctlp);
 }
 
+static void srcu_call_rcu(struct rcu_head *head, rcu_callback_t func)
+{
+	call_srcu(srcu_ctlp, head, func);
+}
+
+static void srcu_rcu_barrier(void)
+{
+	srcu_barrier(srcu_ctlp);
+}
+
 static void srcu_perf_synchronize(void)
 {
 	synchronize_srcu(srcu_ctlp);
@@ -226,11 +251,42 @@ static struct rcu_perf_ops srcu_ops = {
 	.started	= NULL,
 	.completed	= srcu_perf_completed,
 	.exp_completed	= srcu_perf_completed,
+	.async		= srcu_call_rcu,
+	.gp_barrier	= srcu_rcu_barrier,
 	.sync		= srcu_perf_synchronize,
 	.exp_sync	= srcu_perf_synchronize_expedited,
 	.name		= "srcu"
 };
 
+static struct srcu_struct srcud;
+
+static void srcu_sync_perf_init(void)
+{
+	srcu_ctlp = &srcud;
+	init_srcu_struct(srcu_ctlp);
+}
+
+static void srcu_sync_perf_cleanup(void)
+{
+	cleanup_srcu_struct(srcu_ctlp);
+}
+
+static struct rcu_perf_ops srcud_ops = {
+	.ptype		= SRCU_FLAVOR,
+	.init		= srcu_sync_perf_init,
+	.cleanup	= srcu_sync_perf_cleanup,
+	.readlock	= srcu_perf_read_lock,
+	.readunlock	= srcu_perf_read_unlock,
+	.started	= NULL,
+	.completed	= srcu_perf_completed,
+	.exp_completed	= srcu_perf_completed,
+	.async		= srcu_call_rcu,
+	.gp_barrier	= srcu_rcu_barrier,
+	.sync		= srcu_perf_synchronize,
+	.exp_sync	= srcu_perf_synchronize_expedited,
+	.name		= "srcud"
+};
+
 /*
  * Definitions for sched perf testing.
  */
@@ -254,6 +310,8 @@ static struct rcu_perf_ops sched_ops = {
 	.started	= rcu_batches_started_sched,
 	.completed	= rcu_batches_completed_sched,
 	.exp_completed	= rcu_exp_batches_completed_sched,
+	.async		= call_rcu_sched,
+	.gp_barrier	= rcu_barrier_sched,
 	.sync		= synchronize_sched,
 	.exp_sync	= synchronize_sched_expedited,
 	.name		= "sched"
@@ -281,6 +339,8 @@ static struct rcu_perf_ops tasks_ops = {
 	.readunlock	= tasks_perf_read_unlock,
 	.started	= rcu_no_completed,
 	.completed	= rcu_no_completed,
+	.async		= call_rcu_tasks,
+	.gp_barrier	= rcu_barrier_tasks,
 	.sync		= synchronize_rcu_tasks,
 	.exp_sync	= synchronize_rcu_tasks,
 	.name		= "tasks"
@@ -343,6 +403,15 @@ rcu_perf_reader(void *arg)
 	return 0;
 }
 
+/*
+ * Callback function for asynchronous grace periods from rcu_perf_writer().
+ */
+static void rcu_perf_async_cb(struct rcu_head *rhp)
+{
+	atomic_dec(this_cpu_ptr(&n_async_inflight));
+	kfree(rhp);
+}
+
 /*
  * RCU perf writer kthread.  Repeatedly does a grace period.
  */
@@ -352,6 +421,7 @@ rcu_perf_writer(void *arg)
 	int i = 0;
 	int i_max;
 	long me = (long)arg;
+	struct rcu_head *rhp = NULL;
 	struct sched_param sp;
 	bool started = false, done = false, alldone = false;
 	u64 t;
@@ -380,9 +450,27 @@ rcu_perf_writer(void *arg)
 	}
 
 	do {
+		if (writer_holdoff)
+			udelay(writer_holdoff);
 		wdp = &wdpp[i];
 		*wdp = ktime_get_mono_fast_ns();
-		if (gp_exp) {
+		if (gp_async) {
+retry:
+			if (!rhp)
+				rhp = kmalloc(sizeof(*rhp), GFP_KERNEL);
+			if (rhp && atomic_read(this_cpu_ptr(&n_async_inflight)) < gp_async_max) {
+				rcu_perf_writer_state = RTWS_ASYNC;
+				atomic_inc(this_cpu_ptr(&n_async_inflight));
+				cur_ops->async(rhp, rcu_perf_async_cb);
+				rhp = NULL;
+			} else if (!kthread_should_stop()) {
+				rcu_perf_writer_state = RTWS_BARRIER;
+				cur_ops->gp_barrier();
+				goto retry;
+			} else {
+				kfree(rhp); /* Because we are stopping. */
+			}
+		} else if (gp_exp) {
 			rcu_perf_writer_state = RTWS_EXP_SYNC;
 			cur_ops->exp_sync();
 		} else {
@@ -429,6 +517,10 @@ rcu_perf_writer(void *arg)
 			i++;
 		rcu_perf_wait_shutdown();
 	} while (!torture_must_stop());
+	if (gp_async) {
+		rcu_perf_writer_state = RTWS_BARRIER;
+		cur_ops->gp_barrier();
+	}
 	rcu_perf_writer_state = RTWS_STOPPING;
 	writer_n_durations[me] = i_max;
 	torture_kthread_stopping("rcu_perf_writer");
@@ -452,6 +544,17 @@ rcu_perf_cleanup(void)
 	u64 *wdp;
 	u64 *wdpp;
 
+	/*
+	 * Would like warning at start, but everything is expedited
+	 * during the mid-boot phase, so have to wait till the end.
+	 */
+	if (rcu_gp_is_expedited() && !rcu_gp_is_normal() && !gp_exp)
+		VERBOSE_PERFOUT_ERRSTRING("All grace periods expedited, no normal ones to measure!");
+	if (rcu_gp_is_normal() && gp_exp)
+		VERBOSE_PERFOUT_ERRSTRING("All grace periods normal, no expedited ones to measure!");
+	if (gp_exp && gp_async)
+		VERBOSE_PERFOUT_ERRSTRING("No expedited async GPs, so went with async!");
+
 	if (torture_cleanup_begin())
 		return;
 
@@ -554,7 +657,7 @@ rcu_perf_init(void)
 	long i;
 	int firsterr = 0;
 	static struct rcu_perf_ops *perf_ops[] = {
-		&rcu_ops, &rcu_bh_ops, &srcu_ops, &sched_ops,
+		&rcu_ops, &rcu_bh_ops, &srcu_ops, &srcud_ops, &sched_ops,
 		RCUPERF_TASKS_OPS
 	};
 
@@ -624,16 +727,6 @@ rcu_perf_init(void)
 		firsterr = -ENOMEM;
 		goto unwind;
 	}
-	if (rcu_gp_is_expedited() && !rcu_gp_is_normal() && !gp_exp) {
-		VERBOSE_PERFOUT_ERRSTRING("All grace periods expedited, no normal ones to measure!");
-		firsterr = -EINVAL;
-		goto unwind;
-	}
-	if (rcu_gp_is_normal() && gp_exp) {
-		VERBOSE_PERFOUT_ERRSTRING("All grace periods normal, no expedited ones to measure!");
-		firsterr = -EINVAL;
-		goto unwind;
-	}
 	for (i = 0; i < nrealwriters; i++) {
 		writer_durations[i] =
 			kcalloc(MAX_MEAS, sizeof(*writer_durations[i]),

kernel/rcu/rcutorture.c

@@ -52,6 +52,8 @@
 #include <linux/torture.h>
 #include <linux/vmalloc.h>
 
+#include "rcu.h"
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Paul E. McKenney <paulmck@us.ibm.com> and Josh Triplett <josh@joshtriplett.org>");
 
@@ -562,31 +564,19 @@ static void srcu_torture_stats(void)
 	int __maybe_unused cpu;
 	int idx;
 
-#if defined(CONFIG_TREE_SRCU) || defined(CONFIG_CLASSIC_SRCU)
 #ifdef CONFIG_TREE_SRCU
 	idx = srcu_ctlp->srcu_idx & 0x1;
-#else /* #ifdef CONFIG_TREE_SRCU */
-	idx = srcu_ctlp->completed & 0x1;
-#endif /* #else #ifdef CONFIG_TREE_SRCU */
 	pr_alert("%s%s Tree SRCU per-CPU(idx=%d):",
 		 torture_type, TORTURE_FLAG, idx);
 	for_each_possible_cpu(cpu) {
 		unsigned long l0, l1;
 		unsigned long u0, u1;
 		long c0, c1;
-#ifdef CONFIG_TREE_SRCU
 		struct srcu_data *counts;
 
 		counts = per_cpu_ptr(srcu_ctlp->sda, cpu);
 		u0 = counts->srcu_unlock_count[!idx];
 		u1 = counts->srcu_unlock_count[idx];
-#else /* #ifdef CONFIG_TREE_SRCU */
-		struct srcu_array *counts;
-
-		counts = per_cpu_ptr(srcu_ctlp->per_cpu_ref, cpu);
-		u0 = counts->unlock_count[!idx];
-		u1 = counts->unlock_count[idx];
-#endif /* #else #ifdef CONFIG_TREE_SRCU */
 
 		/*
 		 * Make sure that a lock is always counted if the corresponding
@@ -594,13 +584,8 @@ static void srcu_torture_stats(void)
 		 */
 		smp_rmb();
 
-#ifdef CONFIG_TREE_SRCU
 		l0 = counts->srcu_lock_count[!idx];
 		l1 = counts->srcu_lock_count[idx];
-#else /* #ifdef CONFIG_TREE_SRCU */
-		l0 = counts->lock_count[!idx];
-		l1 = counts->lock_count[idx];
-#endif /* #else #ifdef CONFIG_TREE_SRCU */
 
 		c0 = l0 - u0;
 		c1 = l1 - u1;
@@ -609,7 +594,7 @@ static void srcu_torture_stats(void)
 	pr_cont("\n");
 #elif defined(CONFIG_TINY_SRCU)
 	idx = READ_ONCE(srcu_ctlp->srcu_idx) & 0x1;
-	pr_alert("%s%s Tiny SRCU per-CPU(idx=%d): (%d,%d)\n",
+	pr_alert("%s%s Tiny SRCU per-CPU(idx=%d): (%hd,%hd)\n",
 		 torture_type, TORTURE_FLAG, idx,
 		 READ_ONCE(srcu_ctlp->srcu_lock_nesting[!idx]),
 		 READ_ONCE(srcu_ctlp->srcu_lock_nesting[idx]));

kernel/rcu/srcutiny.c

@@ -38,8 +38,8 @@ static int init_srcu_struct_fields(struct srcu_struct *sp)
 	sp->srcu_lock_nesting[0] = 0;
 	sp->srcu_lock_nesting[1] = 0;
 	init_swait_queue_head(&sp->srcu_wq);
-	sp->srcu_gp_seq = 0;
-	rcu_segcblist_init(&sp->srcu_cblist);
+	sp->srcu_cb_head = NULL;
+	sp->srcu_cb_tail = &sp->srcu_cb_head;
 	sp->srcu_gp_running = false;
 	sp->srcu_gp_waiting = false;
 	sp->srcu_idx = 0;
@@ -88,29 +88,13 @@ void cleanup_srcu_struct(struct srcu_struct *sp)
 {
 	WARN_ON(sp->srcu_lock_nesting[0] || sp->srcu_lock_nesting[1]);
 	flush_work(&sp->srcu_work);
-	WARN_ON(rcu_seq_state(sp->srcu_gp_seq));
 	WARN_ON(sp->srcu_gp_running);
 	WARN_ON(sp->srcu_gp_waiting);
-	WARN_ON(!rcu_segcblist_empty(&sp->srcu_cblist));
+	WARN_ON(sp->srcu_cb_head);
+	WARN_ON(&sp->srcu_cb_head != sp->srcu_cb_tail);
 }
 EXPORT_SYMBOL_GPL(cleanup_srcu_struct);
 
-/*
- * Counts the new reader in the appropriate per-CPU element of the
- * srcu_struct.  Can be invoked from irq/bh handlers, but the matching
- * __srcu_read_unlock() must be in the same handler instance.  Returns an
- * index that must be passed to the matching srcu_read_unlock().
- */
-int __srcu_read_lock(struct srcu_struct *sp)
-{
-	int idx;
-
-	idx = READ_ONCE(sp->srcu_idx);
-	WRITE_ONCE(sp->srcu_lock_nesting[idx], sp->srcu_lock_nesting[idx] + 1);
-	return idx;
-}
-EXPORT_SYMBOL_GPL(__srcu_read_lock);
-
 /*
  * Removes the count for the old reader from the appropriate element of
  * the srcu_struct.
@@ -133,52 +117,44 @@ EXPORT_SYMBOL_GPL(__srcu_read_unlock);
 void srcu_drive_gp(struct work_struct *wp)
 {
 	int idx;
-	struct rcu_cblist ready_cbs;
-	struct srcu_struct *sp;
+	struct rcu_head *lh;
 	struct rcu_head *rhp;
+	struct srcu_struct *sp;
 
 	sp = container_of(wp, struct srcu_struct, srcu_work);
-	if (sp->srcu_gp_running || rcu_segcblist_empty(&sp->srcu_cblist))
+	if (sp->srcu_gp_running || !READ_ONCE(sp->srcu_cb_head))
 		return; /* Already running or nothing to do. */
 
-	/* Tag recently arrived callbacks and wait for readers. */
+	/* Remove recently arrived callbacks and wait for readers. */
 	WRITE_ONCE(sp->srcu_gp_running, true);
-	rcu_segcblist_accelerate(&sp->srcu_cblist,
-				 rcu_seq_snap(&sp->srcu_gp_seq));
-	rcu_seq_start(&sp->srcu_gp_seq);
+	local_irq_disable();
+	lh = sp->srcu_cb_head;
+	sp->srcu_cb_head = NULL;
+	sp->srcu_cb_tail = &sp->srcu_cb_head;
+	local_irq_enable();
 	idx = sp->srcu_idx;
 	WRITE_ONCE(sp->srcu_idx, !sp->srcu_idx);
 	WRITE_ONCE(sp->srcu_gp_waiting, true);  /* srcu_read_unlock() wakes! */
 	swait_event(sp->srcu_wq, !READ_ONCE(sp->srcu_lock_nesting[idx]));
 	WRITE_ONCE(sp->srcu_gp_waiting, false); /* srcu_read_unlock() cheap. */
-	rcu_seq_end(&sp->srcu_gp_seq);
-
-	/* Update callback list based on GP, and invoke ready callbacks. */
-	rcu_segcblist_advance(&sp->srcu_cblist,
-			      rcu_seq_current(&sp->srcu_gp_seq));
-	if (rcu_segcblist_ready_cbs(&sp->srcu_cblist)) {
-		rcu_cblist_init(&ready_cbs);
-		local_irq_disable();
-		rcu_segcblist_extract_done_cbs(&sp->srcu_cblist, &ready_cbs);
-		local_irq_enable();
-		rhp = rcu_cblist_dequeue(&ready_cbs);
-		for (; rhp != NULL; rhp = rcu_cblist_dequeue(&ready_cbs)) {
-			local_bh_disable();
-			rhp->func(rhp);
-			local_bh_enable();
-		}
-		local_irq_disable();
-		rcu_segcblist_insert_count(&sp->srcu_cblist, &ready_cbs);
-		local_irq_enable();
+
+	/* Invoke the callbacks we removed above. */
+	while (lh) {
+		rhp = lh;
+		lh = lh->next;
+		local_bh_disable();
+		rhp->func(rhp);
+		local_bh_enable();
 	}
-	WRITE_ONCE(sp->srcu_gp_running, false);
 
 	/*
-	 * If more callbacks, reschedule ourselves.  This can race with
-	 * a call_srcu() at interrupt level, but the ->srcu_gp_running
-	 * checks will straighten that out.
+	 * Enable rescheduling, and if there are more callbacks,
+	 * reschedule ourselves.  This can race with a call_srcu()
+	 * at interrupt level, but the ->srcu_gp_running checks will
+	 * straighten that out.
 	 */
-	if (!rcu_segcblist_empty(&sp->srcu_cblist))
+	WRITE_ONCE(sp->srcu_gp_running, false);
+	if (READ_ONCE(sp->srcu_cb_head))
 		schedule_work(&sp->srcu_work);
 }
 EXPORT_SYMBOL_GPL(srcu_drive_gp);
@@ -187,14 +163,16 @@ EXPORT_SYMBOL_GPL(srcu_drive_gp);
  * Enqueue an SRCU callback on the specified srcu_struct structure,
  * initiating grace-period processing if it is not already running.
  */
-void call_srcu(struct srcu_struct *sp, struct rcu_head *head,
+void call_srcu(struct srcu_struct *sp, struct rcu_head *rhp,
 	       rcu_callback_t func)
 {
 	unsigned long flags;
 
-	head->func = func;
+	rhp->func = func;
+	rhp->next = NULL;
 	local_irq_save(flags);
-	rcu_segcblist_enqueue(&sp->srcu_cblist, head, false);
+	*sp->srcu_cb_tail = rhp;
+	sp->srcu_cb_tail = &rhp->next;
 	local_irq_restore(flags);
 	if (!READ_ONCE(sp->srcu_gp_running))
 		schedule_work(&sp->srcu_work);

kernel/rcu/tiny.c

@@ -35,15 +35,26 @@
 #include <linux/time.h>
 #include <linux/cpu.h>
 #include <linux/prefetch.h>
-#include <linux/trace_events.h>
 
 #include "rcu.h"
 
-/* Forward declarations for tiny_plugin.h. */
-struct rcu_ctrlblk;
-static void __call_rcu(struct rcu_head *head,
-		       rcu_callback_t func,
-		       struct rcu_ctrlblk *rcp);
+/* Global control variables for rcupdate callback mechanism. */
+struct rcu_ctrlblk {
+	struct rcu_head *rcucblist;	/* List of pending callbacks (CBs). */
+	struct rcu_head **donetail;	/* ->next pointer of last "done" CB. */
+	struct rcu_head **curtail;	/* ->next pointer of last CB. */
+};
+
+/* Definition for rcupdate control block. */
+static struct rcu_ctrlblk rcu_sched_ctrlblk = {
+	.donetail	= &rcu_sched_ctrlblk.rcucblist,
+	.curtail	= &rcu_sched_ctrlblk.rcucblist,
+};
+
+static struct rcu_ctrlblk rcu_bh_ctrlblk = {
+	.donetail	= &rcu_bh_ctrlblk.rcucblist,
+	.curtail	= &rcu_bh_ctrlblk.rcucblist,
+};
 
 #include "tiny_plugin.h"
 
@@ -59,19 +70,6 @@ void rcu_barrier_sched(void)
 }
 EXPORT_SYMBOL(rcu_barrier_sched);
 
-#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE)
-
-/*
- * Test whether RCU thinks that the current CPU is idle.
- */
-bool notrace __rcu_is_watching(void)
-{
-	return true;
-}
-EXPORT_SYMBOL(__rcu_is_watching);
-
-#endif /* defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
-
 /*
  * Helper function for rcu_sched_qs() and rcu_bh_qs().
  * Also irqs are disabled to avoid confusion due to interrupt handlers
@@ -79,7 +77,6 @@ EXPORT_SYMBOL(__rcu_is_watching);
  */
 static int rcu_qsctr_help(struct rcu_ctrlblk *rcp)
 {
-	RCU_TRACE(reset_cpu_stall_ticks(rcp);)
 	if (rcp->donetail != rcp->curtail) {
 		rcp->donetail = rcp->curtail;
 		return 1;
@@ -125,7 +122,6 @@ void rcu_bh_qs(void)
  */
 void rcu_check_callbacks(int user)
 {
-	RCU_TRACE(check_cpu_stalls();)
 	if (user)
 		rcu_sched_qs();
 	else if (!in_softirq())
@@ -140,10 +136,8 @@ void rcu_check_callbacks(int user)
  */
 static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
 {
-	const char *rn = NULL;
 	struct rcu_head *next, *list;
 	unsigned long flags;
-	RCU_TRACE(int cb_count = 0;)
 
 	/* Move the ready-to-invoke callbacks to a local list. */
 	local_irq_save(flags);
@@ -152,7 +146,6 @@ static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
 		local_irq_restore(flags);
 		return;
 	}
-	RCU_TRACE(trace_rcu_batch_start(rcp->name, 0, rcp->qlen, -1);)
 	list = rcp->rcucblist;
 	rcp->rcucblist = *rcp->donetail;
 	*rcp->donetail = NULL;
@@ -162,22 +155,15 @@ static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
 	local_irq_restore(flags);
 
 	/* Invoke the callbacks on the local list. */
-	RCU_TRACE(rn = rcp->name;)
 	while (list) {
 		next = list->next;
 		prefetch(next);
 		debug_rcu_head_unqueue(list);
 		local_bh_disable();
-		__rcu_reclaim(rn, list);
+		__rcu_reclaim("", list);
 		local_bh_enable();
 		list = next;
-		RCU_TRACE(cb_count++;)
 	}
-	RCU_TRACE(rcu_trace_sub_qlen(rcp, cb_count);)
-	RCU_TRACE(trace_rcu_batch_end(rcp->name,
-				      cb_count, 0, need_resched(),
-				      is_idle_task(current),
-				      false));
 }
 
 static __latent_entropy void rcu_process_callbacks(struct softirq_action *unused)
@@ -221,7 +207,6 @@ static void __call_rcu(struct rcu_head *head,
 	local_irq_save(flags);
 	*rcp->curtail = head;
 	rcp->curtail = &head->next;
-	RCU_TRACE(rcp->qlen++;)
 	local_irq_restore(flags);
 
 	if (unlikely(is_idle_task(current))) {
@@ -254,8 +239,5 @@ EXPORT_SYMBOL_GPL(call_rcu_bh);
 void __init rcu_init(void)
 {
 	open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
-	RCU_TRACE(reset_cpu_stall_ticks(&rcu_sched_ctrlblk);)
-	RCU_TRACE(reset_cpu_stall_ticks(&rcu_bh_ctrlblk);)
-
 	rcu_early_boot_tests();
 }

kernel/rcu/tree_exp.h

@@ -147,7 +147,7 @@ static void __maybe_unused sync_exp_reset_tree(struct rcu_state *rsp)
  *
  * Caller must hold the rcu_state's exp_mutex.
  */
-static int sync_rcu_preempt_exp_done(struct rcu_node *rnp)
+static bool sync_rcu_preempt_exp_done(struct rcu_node *rnp)
 {
 	return rnp->exp_tasks == NULL &&
 	       READ_ONCE(rnp->expmask) == 0;

kernel/sched/core.c

@@ -5874,15 +5874,9 @@ int sched_cpu_deactivate(unsigned int cpu)
 	 * users of this state to go away such that all new such users will
 	 * observe it.
 	 *
-	 * For CONFIG_PREEMPT we have preemptible RCU and its sync_rcu() might
-	 * not imply sync_sched(), so wait for both.
-	 *
 	 * Do sync before park smpboot threads to take care the rcu boost case.
 	 */
-	if (IS_ENABLED(CONFIG_PREEMPT))
-		synchronize_rcu_mult(call_rcu, call_rcu_sched);
-	else
-		synchronize_rcu();
+	synchronize_rcu_mult(call_rcu, call_rcu_sched);
 
 	if (!sched_smp_initialized)
 		return 0;

kernel/time/Kconfig

@@ -126,56 +126,6 @@ config NO_HZ_FULL_ALL
 	 Note the boot CPU will still be kept outside the range to
 	 handle the timekeeping duty.
 
-config NO_HZ_FULL_SYSIDLE
-	bool "Detect full-system idle state for full dynticks system"
-	depends on NO_HZ_FULL
-	default n
-	help
-	 At least one CPU must keep the scheduling-clock tick running for
-	 timekeeping purposes whenever there is a non-idle CPU, where
-	 "non-idle" also includes dynticks CPUs as long as they are
-	 running non-idle tasks.  Because the underlying adaptive-tick
-	 support cannot distinguish between all CPUs being idle and
-	 all CPUs each running a single task in dynticks mode, the
-	 underlying support simply ensures that there is always a CPU
-	 handling the scheduling-clock tick, whether or not all CPUs
-	 are idle.  This Kconfig option enables scalable detection of
-	 the all-CPUs-idle state, thus allowing the scheduling-clock
-	 tick to be disabled when all CPUs are idle.  Note that scalable
-	 detection of the all-CPUs-idle state means that larger systems
-	 will be slower to declare the all-CPUs-idle state.
-
-	 Say Y if you would like to help debug all-CPUs-idle detection.
-
-	 Say N if you are unsure.
-
-config NO_HZ_FULL_SYSIDLE_SMALL
-	int "Number of CPUs above which large-system approach is used"
-	depends on NO_HZ_FULL_SYSIDLE
-	range 1 NR_CPUS
-	default 8
-	help
-	 The full-system idle detection mechanism takes a lazy approach
-	 on large systems, as is required to attain decent scalability.
-	 However, on smaller systems, scalability is not anywhere near as
-	 large a concern as is energy efficiency.  The sysidle subsystem
-	 therefore uses a fast but non-scalable algorithm for small
-	 systems and a lazier but scalable algorithm for large systems.
-	 This Kconfig parameter defines the number of CPUs in the largest
-	 system that will be considered to be "small".
-
-	 The default value will be fine in most cases.	Battery-powered
-	 systems that (1) enable NO_HZ_FULL_SYSIDLE, (2) have larger
-	 numbers of CPUs, and (3) are suffering from battery-lifetime
-	 problems due to long sysidle latencies might wish to experiment
-	 with larger values for this Kconfig parameter.  On the other
-	 hand, they might be even better served by disabling NO_HZ_FULL
-	 entirely, given that NO_HZ_FULL is intended for HPC and
-	 real-time workloads that at present do not tend to be run on
-	 battery-powered systems.
-
-	 Take the default if you are unsure.
-
 config NO_HZ
 	bool "Old Idle dynticks config"
 	depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS

lib/Makefile

@@ -25,9 +25,6 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 earlycpio.o seq_buf.o siphash.o \
 	 nmi_backtrace.o nodemask.o win_minmax.o
 
-CFLAGS_radix-tree.o += -DCONFIG_SPARSE_RCU_POINTER
-CFLAGS_idr.o += -DCONFIG_SPARSE_RCU_POINTER
-
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
 lib-$(CONFIG_DMA_NOOP_OPS) += dma-noop.o

scripts/checkpatch.pl

@@ -5533,23 +5533,6 @@ sub process {
 			}
 		}
 
-# Check for expedited grace periods that interrupt non-idle non-nohz
-# online CPUs.  These expedited can therefore degrade real-time response
-# if used carelessly, and should be avoided where not absolutely
-# needed.  It is always OK to use synchronize_rcu_expedited() and
-# synchronize_sched_expedited() at boot time (before real-time applications
-# start) and in error situations where real-time response is compromised in
-# any case.  Note that synchronize_srcu_expedited() does -not- interrupt
-# other CPUs, so don't warn on uses of synchronize_srcu_expedited().
-# Of course, nothing comes for free, and srcu_read_lock() and
-# srcu_read_unlock() do contain full memory barriers in payment for
-# synchronize_srcu_expedited() non-interruption properties.
-		if ($line =~ /\b(synchronize_rcu_expedited|synchronize_sched_expedited)\(/) {
-			WARN("EXPEDITED_RCU_GRACE_PERIOD",
-			     "expedited RCU grace periods should be avoided where they can degrade real-time response\n" . $herecurr);
-
-		}
-
 # check of hardware specific defines
 		if ($line =~ m@^.\s*\#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) {
 			CHK("ARCH_DEFINES",

tools/testing/selftests/rcutorture/configs/rcu/SRCU-C.boot

+rcutorture.torture_type=srcud

tools/testing/selftests/rcutorture/configs/rcu/SRCU-t.boot

+rcutorture.torture_type=srcu

tools/testing/selftests/rcutorture/configs/rcu/SRCU-u.boot

+rcutorture.torture_type=srcud