powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)

spi_t was removed in commit 644b2a68
("powerpc/cpm: Remove SPI defines and spi structs"), the commit assumed
that spi_t isn't used anywhere outside of the spi_mpc8xxx driver. But
it appears that the struct is needed for micropatch code. So, let's
reintroduce the struct.

Fixes the following build issue:

    CC      arch/powerpc/sysdev/micropatch.o
  micropatch.c: In function 'cpm_load_patch':
  micropatch.c:629: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
  micropatch.c:629: error: 'spp' undeclared (first use in this function)
  micropatch.c:629: error: (Each undeclared identifier is reported only once
  micropatch.c:629: error: for each function it appears in.)
Reported-by: LEROY Christophe <christophe.leroy@c-s.fr>
Reported-by: Tony Breeds <tony@bakeyournoodle.com>
Cc: <stable@kernel.org> [ .33, .34 ]
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/include/asm/cpm.h

@@ -6,6 +6,30 @@
 #include <linux/errno.h>
 #include <linux/of.h>
 
+/*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+	__be16	rbase;	/* Rx Buffer descriptor base address */
+	__be16	tbase;	/* Tx Buffer descriptor base address */
+	u8	rfcr;	/* Rx function code */
+	u8	tfcr;	/* Tx function code */
+	__be16	mrblr;	/* Max receive buffer length */
+	__be32	rstate;	/* Internal */
+	__be32	rdp;	/* Internal */
+	__be16	rbptr;	/* Internal */
+	__be16	rbc;	/* Internal */
+	__be32	rxtmp;	/* Internal */
+	__be32	tstate;	/* Internal */
+	__be32	tdp;	/* Internal */
+	__be16	tbptr;	/* Internal */
+	__be16	tbc;	/* Internal */
+	__be32	txtmp;	/* Internal */
+	__be32	res;	/* Tx temp. */
+	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
+	__be16	res1;	/* Reserved */
+};
+
 /*
  * USB Controller pram common to QE and CPM.
  */

arch/powerpc/sysdev/micropatch.c

@@ -16,6 +16,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
+#include <asm/cpm.h>
 #include <asm/cpm1.h>
 
 /*
@@ -626,7 +627,7 @@ cpm_load_patch(cpm8xx_t	*cp)
 	volatile uint		*dp;		/* Dual-ported RAM. */
 	volatile cpm8xx_t	*commproc;
 	volatile iic_t		*iip;
-	volatile spi_t		*spp;
+	volatile struct spi_pram *spp;
 	volatile smc_uart_t	*smp;
 	int	i;
 
@@ -668,8 +669,8 @@ cpm_load_patch(cpm8xx_t	*cp)
 	/* Put SPI above the IIC, also 32-byte aligned.
 	*/
 	i = (RPBASE + sizeof(iic_t) + 31) & ~31;
-	spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
-	spp->spi_rpbase = i;
+	spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
+	spp->rpbase = i;
 
 # if defined(CONFIG_I2C_SPI_UCODE_PATCH)
 	commproc->cp_cpmcr1 = 0x802a;

drivers/spi/spi_mpc8xxx.c

@@ -66,28 +66,6 @@ struct mpc8xxx_spi_reg {
 	__be32 receive;
 };
 
-/* SPI Parameter RAM */
-struct spi_pram {
-	__be16	rbase;	/* Rx Buffer descriptor base address */
-	__be16	tbase;	/* Tx Buffer descriptor base address */
-	u8	rfcr;	/* Rx function code */
-	u8	tfcr;	/* Tx function code */
-	__be16	mrblr;	/* Max receive buffer length */
-	__be32	rstate;	/* Internal */
-	__be32	rdp;	/* Internal */
-	__be16	rbptr;	/* Internal */
-	__be16	rbc;	/* Internal */
-	__be32	rxtmp;	/* Internal */
-	__be32	tstate;	/* Internal */
-	__be32	tdp;	/* Internal */
-	__be16	tbptr;	/* Internal */
-	__be16	tbc;	/* Internal */
-	__be32	txtmp;	/* Internal */
-	__be32	res;	/* Tx temp. */
-	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
-	__be16	res1;	/* Reserved */
-};
-
 /* SPI Controller mode register definitions */
 #define	SPMODE_LOOP		(1 << 30)
 #define	SPMODE_CI_INACTIVEHIGH	(1 << 29)