clk: imx: fracn-gppll: support integer pll

The fracn gppll could be configured in FRAC or INTEGER mode during
hardware design. The current driver only support FRAC mode, while
this patch introduces INTEGER support. When the PLL is INTEGER pll,
there is no mfn, mfd, the calculation is as below:
 Fvco_clk = (Fref / DIV[RDIV] ) * DIV[MFI]
 Fclko_odiv = Fvco_clk / DIV[ODIV]

In this patch, we reuse the FRAC pll logic with some condition check to
simplify the driver
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-4-peng.fan@oss.nxp.comSigned-off-by: Abel Vesa <abel.vesa@linaro.org>

drivers/clk/imx/clk-fracn-gppll.c

@@ -53,11 +53,22 @@
 		.odiv	=	(_odiv),			\
 	}
 
+#define PLL_FRACN_GP_INTEGER(_rate, _mfi, _rdiv, _odiv)		\
+	{							\
+		.rate	=	(_rate),			\
+		.mfi	=	(_mfi),				\
+		.mfn	=	0,				\
+		.mfd	=	0,				\
+		.rdiv	=	(_rdiv),			\
+		.odiv	=	(_odiv),			\
+	}
+
 struct clk_fracn_gppll {
 	struct clk_hw			hw;
 	void __iomem			*base;
 	const struct imx_fracn_gppll_rate_table *rate_table;
 	int rate_count;
+	u32 flags;
 };
 
 /*
@@ -83,6 +94,24 @@ struct imx_fracn_gppll_clk imx_fracn_gppll = {
 };
 EXPORT_SYMBOL_GPL(imx_fracn_gppll);
 
+/*
+ * Fvco = (Fref / rdiv) * MFI
+ * Fout = Fvco / odiv
+ * The (Fref / rdiv) should be in range 20MHz to 40MHz
+ * The Fvco should be in range 2.5Ghz to 5Ghz
+ */
+static const struct imx_fracn_gppll_rate_table int_tbl[] = {
+	PLL_FRACN_GP_INTEGER(1700000000U, 141, 1, 2),
+	PLL_FRACN_GP_INTEGER(1400000000U, 175, 1, 3),
+	PLL_FRACN_GP_INTEGER(900000000U, 150, 1, 4),
+};
+
+struct imx_fracn_gppll_clk imx_fracn_gppll_integer = {
+	.rate_table = int_tbl,
+	.rate_count = ARRAY_SIZE(int_tbl),
+};
+EXPORT_SYMBOL_GPL(imx_fracn_gppll_integer);
+
 static inline struct clk_fracn_gppll *to_clk_fracn_gppll(struct clk_hw *hw)
 {
 	return container_of(hw, struct clk_fracn_gppll, hw);
@@ -169,9 +198,15 @@ static unsigned long clk_fracn_gppll_recalc_rate(struct clk_hw *hw, unsigned lon
 		break;
 	}
 
-	/* Fvco = Fref * (MFI + MFN / MFD) */
-	fvco = fvco * mfi * mfd + fvco * mfn;
-	do_div(fvco, mfd * rdiv * odiv);
+	if (pll->flags & CLK_FRACN_GPPLL_INTEGER) {
+		/* Fvco = (Fref / rdiv) * MFI */
+		fvco = fvco * mfi;
+		do_div(fvco, rdiv * odiv);
+	} else {
+		/* Fvco = (Fref / rdiv) * (MFI + MFN / MFD) */
+		fvco = fvco * mfi * mfd + fvco * mfn;
+		do_div(fvco, mfd * rdiv * odiv);
+	}
 
 	return (unsigned long)fvco;
 }
@@ -215,8 +250,10 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
 	pll_div = FIELD_PREP(PLL_RDIV_MASK, rate->rdiv) | rate->odiv |
 		FIELD_PREP(PLL_MFI_MASK, rate->mfi);
 	writel_relaxed(pll_div, pll->base + PLL_DIV);
-	writel_relaxed(rate->mfd, pll->base + PLL_DENOMINATOR);
-	writel_relaxed(FIELD_PREP(PLL_MFN_MASK, rate->mfn), pll->base + PLL_NUMERATOR);
+	if (pll->flags & CLK_FRACN_GPPLL_FRACN) {
+		writel_relaxed(rate->mfd, pll->base + PLL_DENOMINATOR);
+		writel_relaxed(FIELD_PREP(PLL_MFN_MASK, rate->mfn), pll->base + PLL_NUMERATOR);
+	}
 
 	/* Wait for 5us according to fracn mode pll doc */
 	udelay(5);
@@ -300,8 +337,10 @@ static const struct clk_ops clk_fracn_gppll_ops = {
 	.set_rate	= clk_fracn_gppll_set_rate,
 };
 
-struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
-				   const struct imx_fracn_gppll_clk *pll_clk)
+static struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name,
+					   void __iomem *base,
+					   const struct imx_fracn_gppll_clk *pll_clk,
+					   u32 pll_flags)
 {
 	struct clk_fracn_gppll *pll;
 	struct clk_hw *hw;
@@ -322,6 +361,7 @@ struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, vo
 	pll->hw.init = &init;
 	pll->rate_table = pll_clk->rate_table;
 	pll->rate_count = pll_clk->rate_count;
+	pll->flags = pll_flags;
 
 	hw = &pll->hw;
 
@@ -334,4 +374,18 @@ struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, vo
 
 	return hw;
 }
+
+struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
+				   const struct imx_fracn_gppll_clk *pll_clk)
+{
+	return _imx_clk_fracn_gppll(name, parent_name, base, pll_clk, CLK_FRACN_GPPLL_FRACN);
+}
 EXPORT_SYMBOL_GPL(imx_clk_fracn_gppll);
+
+struct clk_hw *imx_clk_fracn_gppll_integer(const char *name, const char *parent_name,
+					   void __iomem *base,
+					   const struct imx_fracn_gppll_clk *pll_clk)
+{
+	return _imx_clk_fracn_gppll(name, parent_name, base, pll_clk, CLK_FRACN_GPPLL_INTEGER);
+}
+EXPORT_SYMBOL_GPL(imx_clk_fracn_gppll_integer);

drivers/clk/imx/clk.h

@@ -73,6 +73,9 @@ extern struct imx_pll14xx_clk imx_1416x_pll;
 extern struct imx_pll14xx_clk imx_1443x_pll;
 extern struct imx_pll14xx_clk imx_1443x_dram_pll;
 
+#define CLK_FRACN_GPPLL_INTEGER	BIT(0)
+#define CLK_FRACN_GPPLL_FRACN	BIT(1)
+
 /* NOTE: Rate table should be kept sorted in descending order. */
 struct imx_fracn_gppll_rate_table {
 	unsigned int rate;
@@ -91,8 +94,12 @@ struct imx_fracn_gppll_clk {
 
 struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base,
 				   const struct imx_fracn_gppll_clk *pll_clk);
+struct clk_hw *imx_clk_fracn_gppll_integer(const char *name, const char *parent_name,
+					   void __iomem *base,
+					   const struct imx_fracn_gppll_clk *pll_clk);
 
 extern struct imx_fracn_gppll_clk imx_fracn_gppll;
+extern struct imx_fracn_gppll_clk imx_fracn_gppll_integer;
 
 #define imx_clk_cpu(name, parent_name, div, mux, pll, step) \
 	to_clk(imx_clk_hw_cpu(name, parent_name, div, mux, pll, step))