Commit 56ed5665 authored by Javier Martinez Canillas's avatar Javier Martinez Canillas Committed by Tony Lindgren

ARM: dts: twl6030: Use OMAP4_IOPAD pinmux macro

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.
Signed-off-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent ed04b374
......@@ -24,7 +24,7 @@ &twl6030_wkup_pins
&omap4_pmx_wkup {
twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
pinctrl-single,pins = <
0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
>;
};
};
......@@ -32,7 +32,7 @@ twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
&omap4_pmx_core {
twl6030_pins: pinmux_twl6030_pins {
pinctrl-single,pins = <
0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment