drm/msm/dsi: Add phy configuration for QCM2290

The QCM2290 SoC a the 14nm (V2.0) single DSI phy. The platform is not
fully compatible with the standard 14nm PHY, so it requires a separate
compatible and config entry.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[DB: rebased and updated commit msg]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/504578/
Link: https://lore.kernel.org/r/20220924121900.222711-3-dmitry.baryshkov@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drivers/gpu/drm/msm/dsi/phy/dsi_phy.c

@@ -549,6 +549,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
 	{ .compatible = "qcom,dsi-phy-14nm",
 	  .data = &dsi_phy_14nm_cfgs },
+	{ .compatible = "qcom,dsi-phy-14nm-2290",
+	  .data = &dsi_phy_14nm_2290_cfgs },
 	{ .compatible = "qcom,dsi-phy-14nm-660",
 	  .data = &dsi_phy_14nm_660_cfgs },
 	{ .compatible = "qcom,dsi-phy-14nm-8953",

drivers/gpu/drm/msm/dsi/phy/dsi_phy.h

@@ -50,6 +50,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs;

drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c

@@ -1081,3 +1081,20 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = {
 	.io_start = { 0x1a94400, 0x1a96400 },
 	.num_dsi_phy = 2,
 };
+
+const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs = {
+	.has_phy_lane = true,
+	.regulator_data = dsi_phy_14nm_17mA_regulators,
+	.num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators),
+	.ops = {
+		.enable = dsi_14nm_phy_enable,
+		.disable = dsi_14nm_phy_disable,
+		.pll_init = dsi_pll_14nm_init,
+		.save_pll_state = dsi_14nm_pll_save_state,
+		.restore_pll_state = dsi_14nm_pll_restore_state,
+	},
+	.min_pll_rate = VCO_MIN_RATE,
+	.max_pll_rate = VCO_MAX_RATE,
+	.io_start = { 0x5e94400 },
+	.num_dsi_phy = 1,
+};