Commit 57303488 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Felipe Balbi

usb: dwc3: adapt dwc3 core to use Generic PHY Framework

Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
power_on and power_off the following APIs are used phy_init(), phy_exit(),
phy_power_on() and phy_power_off().

However using the old USB phy library wont be removed till the PHYs of all
other SoC's using dwc3 core is adapted to the Generic PHY Framework.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 122f06e6
......@@ -6,11 +6,13 @@ Required properties:
- compatible: must be "snps,dwc3"
- reg : Address and length of the register set for the device
- interrupts: Interrupts used by the dwc3 controller.
Optional properties:
- usb-phy : array of phandle for the PHY device. The first element
in the array is expected to be a handle to the USB2/HS PHY and
the second element is expected to be a handle to the USB3/SS PHY
Optional properties:
- phys: from the *Generic PHY* bindings
- phy-names: from the *Generic PHY* bindings
- tx-fifo-resize: determines if the FIFO *has* to be reallocated.
This is usually a subnode to DWC3 glue to which it is connected.
......
......@@ -61,9 +61,10 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
* dwc3_core_soft_reset - Issues core soft reset and PHY reset
* @dwc: pointer to our context structure
*/
static void dwc3_core_soft_reset(struct dwc3 *dwc)
static int dwc3_core_soft_reset(struct dwc3 *dwc)
{
u32 reg;
int ret;
/* Before Resetting PHY, put Core in Reset */
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
......@@ -82,6 +83,15 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
ret = phy_init(dwc->usb2_generic_phy);
if (ret < 0)
return ret;
ret = phy_init(dwc->usb3_generic_phy);
if (ret < 0) {
phy_exit(dwc->usb2_generic_phy);
return ret;
}
mdelay(100);
/* Clear USB3 PHY reset */
......@@ -100,6 +110,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_CORESOFTRESET;
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
return 0;
}
/**
......@@ -391,7 +403,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
cpu_relax();
} while (true);
dwc3_core_soft_reset(dwc);
ret = dwc3_core_soft_reset(dwc);
if (ret)
goto err0;
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
......@@ -456,6 +470,8 @@ static int dwc3_core_init(struct dwc3 *dwc)
err1:
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
err0:
return ret;
......@@ -466,6 +482,8 @@ static void dwc3_core_exit(struct dwc3 *dwc)
dwc3_free_scratch_buffers(dwc);
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
}
#define DWC3_ALIGN_MASK (16 - 1)
......@@ -556,6 +574,32 @@ static int dwc3_probe(struct platform_device *pdev)
}
}
dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
if (IS_ERR(dwc->usb2_generic_phy)) {
ret = PTR_ERR(dwc->usb2_generic_phy);
if (ret == -ENOSYS || ret == -ENODEV) {
dwc->usb2_generic_phy = NULL;
} else if (ret == -EPROBE_DEFER) {
return ret;
} else {
dev_err(dev, "no usb2 phy configured\n");
return ret;
}
}
dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
if (IS_ERR(dwc->usb3_generic_phy)) {
ret = PTR_ERR(dwc->usb3_generic_phy);
if (ret == -ENOSYS || ret == -ENODEV) {
dwc->usb3_generic_phy = NULL;
} else if (ret == -EPROBE_DEFER) {
return ret;
} else {
dev_err(dev, "no usb3 phy configured\n");
return ret;
}
}
dwc->xhci_resources[0].start = res->start;
dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
DWC3_XHCI_REGS_END;
......@@ -612,11 +656,18 @@ static int dwc3_probe(struct platform_device *pdev)
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
ret = phy_power_on(dwc->usb2_generic_phy);
if (ret < 0)
goto err1;
ret = phy_power_on(dwc->usb3_generic_phy);
if (ret < 0)
goto err_usb2phy_power;
ret = dwc3_event_buffers_setup(dwc);
if (ret) {
dev_err(dwc->dev, "failed to setup event buffers\n");
goto err1;
goto err_usb3phy_power;
}
switch (dwc->dr_mode) {
......@@ -685,6 +736,12 @@ static int dwc3_probe(struct platform_device *pdev)
err2:
dwc3_event_buffers_cleanup(dwc);
err_usb3phy_power:
phy_power_off(dwc->usb3_generic_phy);
err_usb2phy_power:
phy_power_off(dwc->usb2_generic_phy);
err1:
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
......@@ -702,6 +759,8 @@ static int dwc3_remove(struct platform_device *pdev)
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
phy_power_off(dwc->usb2_generic_phy);
phy_power_off(dwc->usb3_generic_phy);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
......@@ -799,6 +858,8 @@ static int dwc3_suspend(struct device *dev)
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
return 0;
}
......@@ -807,9 +868,17 @@ static int dwc3_resume(struct device *dev)
{
struct dwc3 *dwc = dev_get_drvdata(dev);
unsigned long flags;
int ret;
usb_phy_init(dwc->usb3_phy);
usb_phy_init(dwc->usb2_phy);
ret = phy_init(dwc->usb2_generic_phy);
if (ret < 0)
return ret;
ret = phy_init(dwc->usb3_generic_phy);
if (ret < 0)
goto err_usb2phy_init;
spin_lock_irqsave(&dwc->lock, flags);
......@@ -833,6 +902,11 @@ static int dwc3_resume(struct device *dev)
pm_runtime_enable(dev);
return 0;
err_usb2phy_init:
phy_exit(dwc->usb2_generic_phy);
return ret;
}
static const struct dev_pm_ops dwc3_dev_pm_ops = {
......
......@@ -31,6 +31,8 @@
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/phy/phy.h>
/* Global constants */
#define DWC3_EP0_BOUNCE_SIZE 512
#define DWC3_ENDPOINTS_NUM 32
......@@ -619,6 +621,8 @@ struct dwc3_scratchpad_array {
* @dr_mode: requested mode of operation
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
* @usb3_generic_phy: pointer to USB3 PHY
* @dcfg: saved contents of DCFG register
* @gctl: saved contents of GCTL register
* @isoch_delay: wValue from Set Isochronous Delay request;
......@@ -679,6 +683,9 @@ struct dwc3 {
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
struct phy *usb2_generic_phy;
struct phy *usb3_generic_phy;
void __iomem *regs;
size_t regs_size;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment