Commit 5750ebab authored by Linus Walleij's avatar Linus Walleij Committed by Jonathan Cameron

iio: ad7266: Convert to use GPIO descriptors

The AD7266 have no in-tree users making use of the platform
data mechanism to pass address GPIO lines when not using
a fixed address, so we can easily convert this to use
GPIO descriptors instead of the platform data integers
currently passed.

Lowercase the labels "ad0".."ad2" as this will make a better
fit for platform descriptions like device tree that prefer
lowercase names such as "ad0-gpios" rather than "AD0-gpios".

Board files and other static users of this device can pass
the same GPIO descriptors using machine descriptor
tables if need be.

Cc: Alison Schofield <amsfield22@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: default avatarAlexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent b747e352
......@@ -11,7 +11,7 @@
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/interrupt.h>
......@@ -34,7 +34,7 @@ struct ad7266_state {
enum ad7266_range range;
enum ad7266_mode mode;
bool fixed_addr;
struct gpio gpios[3];
struct gpio_desc *gpios[3];
/*
* DMA (thus cache coherency maintenance) requires the
......@@ -117,7 +117,7 @@ static void ad7266_select_input(struct ad7266_state *st, unsigned int nr)
}
for (i = 0; i < 3; ++i)
gpio_set_value(st->gpios[i].gpio, (bool)(nr & BIT(i)));
gpiod_set_value(st->gpios[i], (bool)(nr & BIT(i)));
}
static int ad7266_update_scan_mode(struct iio_dev *indio_dev,
......@@ -376,7 +376,7 @@ static void ad7266_init_channels(struct iio_dev *indio_dev)
}
static const char * const ad7266_gpio_labels[] = {
"AD0", "AD1", "AD2",
"ad0", "ad1", "ad2",
};
static int ad7266_probe(struct spi_device *spi)
......@@ -419,14 +419,14 @@ static int ad7266_probe(struct spi_device *spi)
if (!st->fixed_addr) {
for (i = 0; i < ARRAY_SIZE(st->gpios); ++i) {
st->gpios[i].gpio = pdata->addr_gpios[i];
st->gpios[i].flags = GPIOF_OUT_INIT_LOW;
st->gpios[i].label = ad7266_gpio_labels[i];
st->gpios[i] = devm_gpiod_get(&spi->dev,
ad7266_gpio_labels[i],
GPIOD_OUT_LOW);
if (IS_ERR(st->gpios[i])) {
ret = PTR_ERR(st->gpios[i]);
goto error_disable_reg;
}
}
ret = gpio_request_array(st->gpios,
ARRAY_SIZE(st->gpios));
if (ret)
goto error_disable_reg;
}
} else {
st->fixed_addr = true;
......@@ -465,7 +465,7 @@ static int ad7266_probe(struct spi_device *spi)
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
&ad7266_trigger_handler, &iio_triggered_buffer_setup_ops);
if (ret)
goto error_free_gpios;
goto error_disable_reg;
ret = iio_device_register(indio_dev);
if (ret)
......@@ -475,9 +475,6 @@ static int ad7266_probe(struct spi_device *spi)
error_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
error_free_gpios:
if (!st->fixed_addr)
gpio_free_array(st->gpios, ARRAY_SIZE(st->gpios));
error_disable_reg:
if (!IS_ERR(st->reg))
regulator_disable(st->reg);
......@@ -492,8 +489,6 @@ static int ad7266_remove(struct spi_device *spi)
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
if (!st->fixed_addr)
gpio_free_array(st->gpios, ARRAY_SIZE(st->gpios));
if (!IS_ERR(st->reg))
regulator_disable(st->reg);
......
......@@ -40,14 +40,11 @@ enum ad7266_mode {
* @range: Reference voltage range the device is configured for
* @mode: Sample mode the device is configured for
* @fixed_addr: Whether the address pins are hard-wired
* @addr_gpios: GPIOs used for controlling the address pins, only used if
* fixed_addr is set to false.
*/
struct ad7266_platform_data {
enum ad7266_range range;
enum ad7266_mode mode;
bool fixed_addr;
unsigned int addr_gpios[3];
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment