ASoC: arizona: Move binding over to dtschema

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/sound/wlf,arizona.txt

-Cirrus Logic Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-This document lists sound specific bindings, see the primary binding
-document:
-  ../mfd/arizona.txt
-
-Optional properties:
-
-  - wlf,inmode : A list of INn_MODE register values, where n is the number
-    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
-    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
-    If present, values must be specified less than or equal to the number of
-    input signals. If values less than the number of input signals, elements
-    that have not been specified are set to 0 by default. Entries are:
-    <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
-    <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
-  - wlf,out-mono : A list of boolean values indicating whether each output is
-    mono or stereo. Position within the list indicates the output affected
-    (eg. First entry in the list corresponds to output 1). A non-zero value
-    indicates a mono output. If present, the number of values should be less
-    than or equal to the number of outputs, if less values are supplied the
-    additional outputs will be treated as stereo.
-
-  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
-    selected from either MICVDD or one of the MICBIAS's, defines
-    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
-    present, the number of values should be less than or equal to the
-    number of inputs, unspecified inputs will use the chip default.
-
-  - wlf,max-channels-clocked : The maximum number of channels to be clocked on
-    each AIF, useful for I2S systems with multiple data lines being mastered.
-    Specify one cell for each AIF to be configured, specify zero for AIFs that
-    should be handled normally.
-    If present, number of cells must be less than or equal to the number of
-    AIFs. If less than the number of AIFs, for cells that have not been
-    specified the corresponding AIFs will be treated as default setting.
-
-  - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
-    See the datasheet for values.
-    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
-      wm8998, wm1814)
-
-  - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
-    See the datasheet for values.
-    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
-    wm8998, wm1814)
-
-  - wlf,out-volume-limit : The volume limit value that should be applied to each
-    output channel. See the datasheet for exact values. Channels are specified
-    in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.

Documentation/devicetree/bindings/sound/wlf,arizona.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a range
+  of analogue I/O.
+
+  This document lists sound specific bindings, see the primary binding
+  document ../mfd/arizona.yaml
+
+properties:
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  wlf,inmode:
+    description:
+      A list of INn_MODE register values, where n is the number of input
+      signals. Valid values are 0 (Differential), 1 (Single-ended) and
+      2 (Digital Microphone). If absent, INn_MODE registers set to 0 by
+      default.  If present, values must be specified less than or equal
+      to the number of input signals. If values less than the number of
+      input signals, elements that have not been specified are set to 0 by
+      default. Entries are <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280,
+      wm8997) and <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 2
+      default: 0
+
+  wlf,out-mono:
+    description:
+      A list of boolean values indicating whether each output is mono
+      or stereo. Position within the list indicates the output affected
+      (eg. First entry in the list corresponds to output 1). A non-zero
+      value indicates a mono output. If present, the number of values
+      should be less than or equal to the number of outputs, if less values
+      are supplied the additional outputs will be treated as stereo.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    items:
+      minimum: 0
+      maximum: 1
+      default: 0
+
+  wlf,dmic-ref:
+    description:
+      DMIC reference voltage source for each input, can be selected from
+      either MICVDD or one of the MICBIAS's, defines (ARIZONA_DMIC_xxxx)
+      are provided in dt-bindings/mfd/arizona.h. If present, the number
+      of values should be less than or equal to the number of inputs,
+      unspecified inputs will use the chip default.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 3
+      default: 0
+
+  wlf,max-channels-clocked:
+    description:
+      The maximum number of channels to be clocked on each AIF, useful for
+      I2S systems with multiple data lines being mastered.  Specify one
+      cell for each AIF to be configured, specify zero for AIFs that should
+      be handled normally.  If present, number of cells must be less than
+      or equal to the number of AIFs. If less than the number of AIFs, for
+      cells that have not been specified the corresponding AIFs will be
+      treated as default setting.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+    items:
+      default: 0
+
+  wlf,spk-fmt:
+    description:
+      PDM speaker data format, must contain 2 cells (OUT5 and OUT6).  See
+      the datasheet for values.  The second cell is ignored for codecs that
+      do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+  wlf,spk-mute:
+    description:
+      PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).  See
+      the datasheet for values.  The second cell is ignored for codecs that
+      do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+  wlf,out-volume-limit:
+    description:
+      The volume limit value that should be applied to each output
+      channel. See the datasheet for exact values. Channels are specified
+      in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 12