mmc: tmio: factor out common parts of the reset routine

Some TMIO variants need specific actions in their reset routine, but
they are all based on a generic reset routine. So, the optional 'reset'
callback will now only take care of the additional stuff and we will
have a generic function around it. Less code, easier to maintain, and
much more readable. Code in tmio_mmc.c is untested but in my TC6387XB
datasheet the SDIO part is reset independently from the SD part, too.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20200820132538.24758-5-wsa+renesas@sang-engineering.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/renesas_sdhi_core.c

@@ -635,17 +635,6 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host)
 {
 	struct renesas_sdhi *priv = host_to_priv(host);
 
-	/* FIXME - should we set stop clock reg here */
-	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
-	usleep_range(10000, 11000);
-	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
-	usleep_range(10000, 11000);
-
-	if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
-		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
-	}
-
 	renesas_sdhi_reset_scc(host, priv);
 	renesas_sdhi_reset_hs400_mode(host, priv);
 

drivers/mmc/host/tmio_mmc.c

@@ -77,18 +77,10 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
 
 static void tmio_mmc_reset(struct tmio_mmc_host *host)
 {
-	/* FIXME - should we set stop clock reg here */
-	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
 	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
 	usleep_range(10000, 11000);
-	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
 	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
 	usleep_range(10000, 11000);
-
-	if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
-		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
-		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
-	}
 }
 
 #ifdef CONFIG_PM_SLEEP

drivers/mmc/host/tmio_mmc_core.c

@@ -172,6 +172,9 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
 	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
 	usleep_range(10000, 11000);
 
+	if (host->reset)
+		host->reset(host);
+
 	if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
 		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
 		sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
@@ -216,7 +219,7 @@ static void tmio_mmc_reset_work(struct work_struct *work)
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	host->reset(host);
+	tmio_mmc_reset(host);
 
 	/* Ready for new calls */
 	host->mrq = NULL;
@@ -721,7 +724,7 @@ static int tmio_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 	if (ret < 0) {
 		dev_warn(&host->pdev->dev, "Tuning procedure failed\n");
-		host->reset(host);
+		tmio_mmc_reset(host);
 	}
 
 	return ret;
@@ -1144,9 +1147,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
 				  mmc->caps & MMC_CAP_NEEDS_POLL ||
 				  !mmc_card_is_removable(mmc));
 
-	if (!_host->reset)
-		_host->reset = tmio_mmc_reset;
-
 	/*
 	 * On Gen2+, eMMC with NONREMOVABLE currently fails because native
 	 * hotplug gets disabled. It seems RuntimePM related yet we need further
@@ -1168,7 +1168,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
 		_host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
 
 	_host->set_clock(_host, 0);
-	_host->reset(_host);
+	tmio_mmc_reset(_host);
 
 	_host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK);
 	tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
@@ -1271,7 +1271,7 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
 	struct tmio_mmc_host *host = dev_get_drvdata(dev);
 
 	tmio_mmc_clk_enable(host);
-	host->reset(host);
+	tmio_mmc_reset(host);
 
 	if (host->clk_cache)
 		host->set_clock(host, host->clk_cache);