Skip to content

L
linux
Commit 57b8b003 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab
Browse files
Options

[media] drxk_hard.h: Remove some alien comment markups 

X-Patchwork-Delegate: mchehab@redhat.com
The comments markup language used on Kernel is defined at:
	Documentation/kernel-doc-nano-HOWTO.txt
Remove invalid markups from the header file.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent b72852ba
Hide whitespace changes
Inline Side-by-side
Showing with 53 additions and 53 deletions
drivers/media/dvb-frontends/drxk_hard.h
View file @ 57b8b003
......@@ -77,17 +77,17 @@ enum drx_power_mode {
};
/** /brief Intermediate power mode for DRXK, power down OFDM clock domain */
/* Intermediate power mode for DRXK, power down OFDM clock domain */
#ifndef DRXK_POWER_DOWN_OFDM
#define DRXK_POWER_DOWN_OFDM DRX_POWER_MODE_1
#endif
/** /brief Intermediate power mode for DRXK, power down core (sysclk) */
/* Intermediate power mode for DRXK, power down core (sysclk) */
#ifndef DRXK_POWER_DOWN_CORE
#define DRXK_POWER_DOWN_CORE DRX_POWER_MODE_9
#endif
/** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */
/* Intermediate power mode for DRXK, power down pll (only osc runs) */
#ifndef DRXK_POWER_DOWN_PLL
#define DRXK_POWER_DOWN_PLL DRX_POWER_MODE_10
#endif
......@@ -193,13 +193,13 @@ struct s_cfg_pre_saw {
};
struct drxk_ofdm_sc_cmd_t {
u16 cmd; /**< Command number */
u16 subcmd; /**< Sub-command parameter*/
u16 param0; /**< General purpous param */
u16 param1; /**< General purpous param */
u16 param2; /**< General purpous param */
u16 param3; /**< General purpous param */
u16 param4; /**< General purpous param */
u16 cmd; /* Command number */
u16 subcmd; /* Sub-command parameter*/
u16 param0; /* General purpous param */
u16 param1; /* General purpous param */
u16 param2; /* General purpous param */
u16 param3; /* General purpous param */
u16 param4; /* General purpous param */
};
struct drxk_state {
......@@ -213,7 +213,7 @@ struct drxk_state {
struct mutex mutex;
u32 m_instance; /**< Channel 1,2,3 or 4 */
u32 m_instance; /* Channel 1,2,3 or 4 */
int m_chunk_size;
u8 chunk[256];
......@@ -234,33 +234,33 @@ struct drxk_state {
u16 m_hi_cfg_wake_up_key;
u16 m_hi_cfg_timeout;
u16 m_hi_cfg_ctrl;
s32 m_sys_clock_freq; /**< system clock frequency in kHz */
enum e_drxk_state m_drxk_state; /**< State of Drxk (init,stopped,started) */
enum operation_mode m_operation_mode; /**< digital standards */
struct s_cfg_agc m_vsb_rf_agc_cfg; /**< settings for VSB RF-AGC */
struct s_cfg_agc m_vsb_if_agc_cfg; /**< settings for VSB IF-AGC */
u16 m_vsb_pga_cfg; /**< settings for VSB PGA */
struct s_cfg_pre_saw m_vsb_pre_saw_cfg; /**< settings for pre SAW sense */
s32 m_Quality83percent; /**< MER level (*0.1 dB) for 83% quality indication */
s32 m_Quality93percent; /**< MER level (*0.1 dB) for 93% quality indication */
s32 m_sys_clock_freq; /* system clock frequency in kHz */
enum e_drxk_state m_drxk_state; /* State of Drxk (init,stopped,started) */
enum operation_mode m_operation_mode; /* digital standards */
struct s_cfg_agc m_vsb_rf_agc_cfg; /* settings for VSB RF-AGC */
struct s_cfg_agc m_vsb_if_agc_cfg; /* settings for VSB IF-AGC */
u16 m_vsb_pga_cfg; /* settings for VSB PGA */
struct s_cfg_pre_saw m_vsb_pre_saw_cfg; /* settings for pre SAW sense */
s32 m_Quality83percent; /* MER level (*0.1 dB) for 83% quality indication */
s32 m_Quality93percent; /* MER level (*0.1 dB) for 93% quality indication */
bool m_smart_ant_inverted;
bool m_b_debug_enable_bridge;
bool m_b_p_down_open_bridge; /**< only open DRXK bridge before power-down once it has been accessed */
bool m_b_power_down; /**< Power down when not used */
u32 m_iqm_fs_rate_ofs; /**< frequency shift as written to DRXK register (28bit fixpoint) */
bool m_enable_mpeg_output; /**< If TRUE, enable MPEG output */
bool m_insert_rs_byte; /**< If TRUE, insert RS byte */
bool m_enable_parallel; /**< If TRUE, parallel out otherwise serial */
bool m_invert_data; /**< If TRUE, invert DATA signals */
bool m_invert_err; /**< If TRUE, invert ERR signal */
bool m_invert_str; /**< If TRUE, invert STR signals */
bool m_invert_val; /**< If TRUE, invert VAL signals */
bool m_invert_clk; /**< If TRUE, invert CLK signals */
bool m_b_p_down_open_bridge; /* only open DRXK bridge before power-down once it has been accessed */
bool m_b_power_down; /* Power down when not used */
u32 m_iqm_fs_rate_ofs; /* frequency shift as written to DRXK register (28bit fixpoint) */
bool m_enable_mpeg_output; /* If TRUE, enable MPEG output */
bool m_insert_rs_byte; /* If TRUE, insert RS byte */
bool m_enable_parallel; /* If TRUE, parallel out otherwise serial */
bool m_invert_data; /* If TRUE, invert DATA signals */
bool m_invert_err; /* If TRUE, invert ERR signal */
bool m_invert_str; /* If TRUE, invert STR signals */
bool m_invert_val; /* If TRUE, invert VAL signals */
bool m_invert_clk; /* If TRUE, invert CLK signals */
bool m_dvbc_static_clk;
bool m_dvbt_static_clk; /**< If TRUE, static MPEG clockrate will
bool m_dvbt_static_clk; /* If TRUE, static MPEG clockrate will
be used, otherwise clockrate will
adapt to the bitrate of the TS */
u32 m_dvbt_bitrate;
......@@ -271,22 +271,22 @@ struct drxk_state {
bool m_itut_annex_c; /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */
enum drxmpeg_str_width_t m_width_str; /**< MPEG start width */
u32 m_mpeg_ts_static_bitrate; /**< Maximum bitrate in b/s in case
enum drxmpeg_str_width_t m_width_str; /* MPEG start width */
u32 m_mpeg_ts_static_bitrate; /* Maximum bitrate in b/s in case
static clockrate is selected */
/* LARGE_INTEGER m_startTime; */ /**< Contains the time of the last demod start */
s32 m_mpeg_lock_time_out; /**< WaitForLockStatus Timeout (counts from start time) */
s32 m_demod_lock_time_out; /**< WaitForLockStatus Timeout (counts from start time) */
/* LARGE_INTEGER m_startTime; */ /* Contains the time of the last demod start */
s32 m_mpeg_lock_time_out; /* WaitForLockStatus Timeout (counts from start time) */
s32 m_demod_lock_time_out; /* WaitForLockStatus Timeout (counts from start time) */
bool m_disable_te_ihandling;
bool m_rf_agc_pol;
bool m_if_agc_pol;
struct s_cfg_agc m_atv_rf_agc_cfg; /**< settings for ATV RF-AGC */
struct s_cfg_agc m_atv_if_agc_cfg; /**< settings for ATV IF-AGC */
struct s_cfg_pre_saw m_atv_pre_saw_cfg; /**< settings for ATV pre SAW sense */
struct s_cfg_agc m_atv_rf_agc_cfg; /* settings for ATV RF-AGC */
struct s_cfg_agc m_atv_if_agc_cfg; /* settings for ATV IF-AGC */
struct s_cfg_pre_saw m_atv_pre_saw_cfg; /* settings for ATV pre SAW sense */
bool m_phase_correction_bypass;
s16 m_atv_top_vid_peak;
u16 m_atv_top_noise_th;
......@@ -294,13 +294,13 @@ struct drxk_state {
bool m_enable_cvbs_output;
bool m_enable_sif_output;
bool m_b_mirror_freq_spect;
enum e_drxk_constellation m_constellation; /**< constellation type of the channel */
u32 m_curr_symbol_rate; /**< Current QAM symbol rate */
struct s_cfg_agc m_qam_rf_agc_cfg; /**< settings for QAM RF-AGC */
struct s_cfg_agc m_qam_if_agc_cfg; /**< settings for QAM IF-AGC */
u16 m_qam_pga_cfg; /**< settings for QAM PGA */
struct s_cfg_pre_saw m_qam_pre_saw_cfg; /**< settings for QAM pre SAW sense */
enum e_drxk_interleave_mode m_qam_interleave_mode; /**< QAM Interleave mode */
enum e_drxk_constellation m_constellation; /* constellation type of the channel */
u32 m_curr_symbol_rate; /* Current QAM symbol rate */
struct s_cfg_agc m_qam_rf_agc_cfg; /* settings for QAM RF-AGC */
struct s_cfg_agc m_qam_if_agc_cfg; /* settings for QAM IF-AGC */
u16 m_qam_pga_cfg; /* settings for QAM PGA */
struct s_cfg_pre_saw m_qam_pre_saw_cfg; /* settings for QAM pre SAW sense */
enum e_drxk_interleave_mode m_qam_interleave_mode; /* QAM Interleave mode */
u16 m_fec_rs_plen;
u16 m_fec_rs_prescale;
......@@ -309,9 +309,9 @@ struct drxk_state {
u16 m_gpio;
u16 m_gpio_cfg;
struct s_cfg_agc m_dvbt_rf_agc_cfg; /**< settings for QAM RF-AGC */
struct s_cfg_agc m_dvbt_if_agc_cfg; /**< settings for QAM IF-AGC */
struct s_cfg_pre_saw m_dvbt_pre_saw_cfg; /**< settings for QAM pre SAW sense */
struct s_cfg_agc m_dvbt_rf_agc_cfg; /* settings for QAM RF-AGC */
struct s_cfg_agc m_dvbt_if_agc_cfg; /* settings for QAM IF-AGC */
struct s_cfg_pre_saw m_dvbt_pre_saw_cfg; /* settings for QAM pre SAW sense */
u16 m_agcfast_clip_ctrl_delay;
bool m_adc_comp_passed;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7