Merge tag 'qcom-arm64-for-4.10' into arm64-for-4.10-2

Qualcomm ARM64 Updates for v4.10

* Add Hexagon SMD/PIL nodes
* Add DB820c PMIC pins
* Fixup APQ8016 voltage ranges
* Add various MSM8996 nodes to support SMD/SMEM/SMP2P
* Add support for Huawei Nexus 6P (Angler)
* Add support for LG Nexus 5x (Bullhead)

Documentation/devicetree/bindings/arm/qcom.txt

@@ -21,6 +21,8 @@ The 'SoC' element must be one of the following strings:
 	apq8096
 	msm8916
 	msm8974
+	msm8992
+	msm8994
 	msm8996
 
 The 'board' element must be one of the following strings:

arch/arm64/boot/dts/qcom/Makefile

-dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -15,6 +15,7 @@
 #include "pm8916.dtsi"
 #include "apq8016-sbc-soc-pins.dtsi"
 #include "apq8016-sbc-pmic-pins.dtsi"
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -251,6 +252,60 @@ dsi-phy@1a98300 {
 				vddio-supply = <&pm8916_l6>;
 			};
 		};
+
+		lpass_codec: codec{
+			status = "okay";
+		};
+
+		/*
+		Internal Codec
+			playback - Primary MI2S
+			capture - Ter MI2S
+
+		External Primary:
+			playback - secondary MI2S
+			capture - Quat MI2S
+
+		External Secondary:
+			playback - Quat MI2S
+			capture - Quat MI2S
+
+		*/
+
+                sound: sound {
+                        compatible = "qcom,apq8016-sbc-sndcard";
+                        reg = <0x07702000 0x4>, <0x07702004 0x4>;
+                        reg-names = "mic-iomux", "spkr-iomux";
+
+                        status = "okay";
+                        pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+                        pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+                        pinctrl-names = "default", "sleep";
+                        qcom,model = "DB410c";
+                        qcom,audio-routing =
+                                "AMIC2", "MIC BIAS Internal2",
+                                "AMIC3", "MIC BIAS External1";
+
+                        internal-codec-playback-dai-link@0 {            /* I2S - Internal codec */
+                                link-name = "WCD";
+                                cpu { /* PRIMARY */
+                                        sound-dai = <&lpass MI2S_PRIMARY>;
+                                };
+                                codec {
+                                        sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+                                };
+                        };
+
+                        internal-codec-capture-dai-link@0 {             /* I2S - Internal codec */
+                                link-name = "WCD-Capture";
+                                cpu { /* PRIMARY */
+                                        sound-dai = <&lpass MI2S_TERTIARY>;
+                                };
+                                codec {
+                                        sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+                                };
+                        };
+                };
 	};
 
 	usb2513 {
@@ -278,6 +333,12 @@ hdmi_con: endpoint {
 	};
 };
 
+&wcd_codec {
+        status = "okay";
+        clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+        clock-names = "mclk";
+};
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l5-supply = <&pm8916_s3>;
@@ -308,8 +369,8 @@ l1 {
 	};
 
 	l2 {
-		regulator-min-microvolt = <375000>;
-		regulator-max-microvolt = <1525000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
 	};
 
 	l3 {
@@ -328,8 +389,8 @@ l5 {
 	};
 
 	l6 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 	};
 
 	l7 {
@@ -388,8 +449,8 @@ l16 {
 	};
 
 	l17 {
-		regulator-min-microvolt = <1750000>;
-		regulator-max-microvolt = <3337000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	l18 {

arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi

+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+&pm8994_gpios {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f>;
+
+	ls_exp_gpio_f: pm8916_mpp4 {
+		pinconf {
+			pins = "gpio5";
+			output-low;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
+};

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi

@@ -12,7 +12,9 @@
  */
 
 #include "msm8996.dtsi"
+#include "pm8994.dtsi"
 #include "apq8096-db820c-pins.dtsi"
+#include "apq8096-db820c-pmic-pins.dtsi"
 
 / {
 	aliases {

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -77,7 +77,7 @@ rfsa@867e00000 {
 			no-map;
 		};
 
-		mpss@86800000 {
+		mpss_mem: mpss@86800000 {
 			reg = <0x0 0x86800000 0x0 0x2b00000>;
 			no-map;
 		};
@@ -504,6 +504,15 @@ lpass: lpass@07708000 {
 			reg-names = "lpass-lpaif";
 		};
 
+                lpass_codec: codec{
+			compatible = "qcom,msm8916-wcd-digital-codec";
+			reg = <0x0771c000 0x400>;
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+			clock-names = "ahbix-clk", "mclk";
+			#sound-dai-cells = <1>;
+                };
+
 		sdhc_1: sdhci@07824000 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
@@ -801,6 +810,49 @@ dsi_phy0: dsi-phy@1a98300 {
 				clock-names = "iface_clk";
 			};
 		};
+
+
+		hexagon@4080000 {
+			compatible = "qcom,q6v5-pil";
+			reg = <0x04080000 0x100>,
+			      <0x04020000 0x040>;
+
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc 0 24 1>,
+					      <&hexagon_smp2p_in 0 0>,
+					      <&hexagon_smp2p_in 1 0>,
+					      <&hexagon_smp2p_in 2 0>,
+					      <&hexagon_smp2p_in 3 0>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>;
+			clock-names = "iface", "bus", "mem";
+
+			qcom,smem-states = <&hexagon_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&scm 0>;
+			reset-names = "mss_restart";
+
+			mx-supply = <&pm8916_l3>;
+			pll-supply = <&pm8916_l7>;
+
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+		};
 	};
 
 	smd {
@@ -848,6 +900,14 @@ smd_rpm_regulators: pm8916-regulators {
 				};
 			};
 		};
+
+		hexagon {
+			interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,smd-edge = <0>;
+			qcom,ipc = <&apcs 8 12>;
+			qcom,remote-pid = <1>;
+		};
 	};
 
 	hexagon-smp2p {

arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts

+/* Copyright (c) 2015, LGE Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+
+/ {
+	model = "LG Nexus 5X";
+	compatible = "lg,bullhead", "qcom,msm8992";
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0xb64 0>;
+	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@f991e000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+		};
+	};
+};

arch/arm64/boot/dts/qcom/msm8992-pins.dtsi

+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+	blsp1_uart2_default: blsp1_uart2_default {
+		pinmux {
+			function = "blsp_uart2";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp1_uart2_sleep: blsp1_uart2_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};

arch/arm64/boot/dts/qcom/msm8992.dtsi

+/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8992";
+	compatible = "qcom,msm8992";
+	// msm-id needed by bootloader for selecting correct blob
+	qcom,msm-id = <251 0>, <252 0>;
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xo_board: xo_board {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+	};
+
+	sleep_clk: sleep_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+				<0xf9002000 0x1000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+					<0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		msmgpio: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
+			status = "disabled";
+			clock-names = "core", "iface";
+			clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
+				<&clock_gcc GCC_BLSP1_AHB_CLK>;
+		};
+
+		clock_gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8994";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x2000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>; // bootloader will update
+	};
+};
+
+
+#include "msm8992-pins.dtsi"

arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts

+/* Copyright (c) 2015, Huawei Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "msm8994.dtsi"
+
+/ {
+	model = "Huawei Nexus 6P";
+	compatible = "huawei,angler", "qcom,msm8994";
+	/* required for bootloader to select correct board */
+	qcom,board-id = <8026 0>;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@f991e000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+		};
+	};
+};

arch/arm64/boot/dts/qcom/msm8994-pins.dtsi

+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+	blsp1_uart2_default: blsp1_uart2_default {
+		pinmux {
+			function = "blsp_uart2";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp1_uart2_sleep: blsp1_uart2_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};

arch/arm64/boot/dts/qcom/msm8994.dtsi

+/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8994";
+	compatible = "qcom,msm8994";
+	// msm-id and pmic-id are required by bootloader for
+	// proper selection of dt blob
+	qcom,msm-id = <207 0x20000>;
+	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 2 0xff08>,
+			     <1 3 0xff08>,
+			     <1 4 0xff08>,
+			     <1 1 0xff08>;
+	};
+
+	soc: soc {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+				  <0xf9002000 0x1000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		msmgpio: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clock-names = "core", "iface";
+			clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&clock_gcc GCC_BLSP1_AHB_CLK>;
+		};
+
+		tcsr_mutex_regs: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
+
+		clock_gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8994";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x2000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		// We expect the bootloader to fill in the reg
+		reg = <0 0 0 0>;
+	};
+
+	xo_board: xo_board {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+	};
+
+	sleep_clk: sleep_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem_mem: smem_region@6a00000 {
+			reg = <0x0 0x6a00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x80>;
+		#hwlock-cells = <1>;
+	};
+
+	qcom,smem@6a00000 {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+};
+
+
+#include "msm8994-pins.dtsi"

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -30,6 +30,42 @@ memory {
 		reg = <0 0 0 0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mba_region: mba@91500000 {
+			reg = <0x0 0x91500000 0x0 0x200000>;
+			no-map;
+		};
+
+		slpi_region: slpi@90b00000 {
+			reg = <0x0 0x90b00000 0x0 0xa00000>;
+			no-map;
+		};
+
+		venus_region: venus@90400000 {
+			reg = <0x0 0x90400000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_region: adsp@8ea00000 {
+			reg = <0x0 0x8ea00000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		mpss_region: mpss@88800000 {
+			reg = <0x0 0x88800000 0x0 0x6200000>;
+			no-map;
+		};
+
+		smem_mem: smem-mem@86000000 {
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -212,12 +248,29 @@ psci {
 		method = "smc";
 	};
 
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		tcsr_mutex_regs: syscon@740000 {
+			compatible = "syscon";
+			reg = <0x740000 0x20000>;
+		};
+
 		intc: interrupt-controller@9bc0000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -229,6 +282,11 @@ intc: interrupt-controller@9bc0000 {
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		apcs: syscon@9820000 {
+			compatible = "syscon";
+			reg = <0x9820000 0x1000>;
+		};
+
 		gcc: clock-controller@300000 {
 			compatible = "qcom,gcc-msm8996";
 			#clock-cells = <1>;
@@ -458,5 +516,29 @@ mmcc: clock-controller@8c0000 {
 					       <825000000>;
 		};
 	};
+
+	adsp-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 16 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
 };
 #include "msm8996-pins.dtsi"

arch/arm64/boot/dts/qcom/pm8916.dtsi

@@ -91,9 +91,52 @@ ref_vdd {
 	};
 
 	pm8916_1: pm8916@1 {
-		compatible = "qcom,spmi-pmic";
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+                wcd_codec: codec@f000 {
+                       compatible = "qcom,pm8916-wcd-analog-codec";
+	               reg = <0xf000 0x200>;
+	               reg-names = "pmic-codec-core";
+	               clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	               clock-names = "mclk";
+	               interrupt-parent = <&spmi_bus>;
+	               interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+	                            <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+	                            <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+	               interrupt-names = "cdc_spk_cnp_int",
+	                                 "cdc_spk_clip_int",
+	                                 "cdc_spk_ocp_int",
+	                                 "mbhc_ins_rem_det1",
+	                                 "mbhc_but_rel_det",
+	                                 "mbhc_but_press_det",
+	                                 "mbhc_ins_rem_det",
+	                                 "mbhc_switch_int",
+	                                 "cdc_ear_ocp_int",
+	                                 "cdc_hphr_ocp_int",
+	                                 "cdc_hphl_ocp_det",
+	                                 "cdc_ear_cnp_int",
+	                                 "cdc_hphr_cnp_int",
+	                                 "cdc_hphl_cnp_int";
+	               vdd-cdc-io-supply = <&pm8916_l5>;
+	               vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+	               vdd-micbias-supply = <&pm8916_l13>;
+	               #sound-dai-cells = <1>;
+
+                };
+
 	};
 };

arch/arm64/boot/dts/qcom/pm8994.dtsi

@@ -29,6 +29,7 @@ pm8994_gpios: gpios@c000 {
 				     <0 0xcc 0 IRQ_TYPE_NONE>,
 				     <0 0xcd 0 IRQ_TYPE_NONE>,
 				     <0 0xce 0 IRQ_TYPE_NONE>,
+				     <0 0xcf 0 IRQ_TYPE_NONE>,
 				     <0 0xd0 0 IRQ_TYPE_NONE>,
 				     <0 0xd1 0 IRQ_TYPE_NONE>,
 				     <0 0xd2 0 IRQ_TYPE_NONE>,