Merge tag 'iio-for-3.16c' of...

Merge tag 'iio-for-3.16c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third round of new stuff for IIO in the 3.16 cycle.

This (rather late) set consists only of fixes to patches earlier in the
cycle or minor fixes for other problems (such as randconfig build issues
picked up by Arnd).  I've included the general minor fixes here as it is
very late in the current cycle and they can all wait for the merge window.

* Recent change to hid-sensors introduced a possible infinite loop due to a
  typo. In the same series, a report interval unit read was added but in the
  case where the hardware doesn't support it a value of 0 would lead to some
  nasty issues.  The patch sets it to the specified default of msecs.
* Anon inodes were used by IIO without being explicitly selected.  This has
  been true for a long time so it clearly only effects rather unusual
  configurations (rand configs)
* at91 requires the input subsytem but this wasn't explicity in the Kconfig.
* A couple of parts supported by the max1363 driver were using the wrong
  iio_chan_spec arrays and hence would missreport their bit depths.  This has
  been there a long time and was never right so isn't a regression.

drivers/iio/Kconfig

@@ -4,6 +4,7 @@
 
 menuconfig IIO
 	tristate "Industrial I/O support"
+	select ANON_INODES
 	help
 	  The industrial I/O subsystem provides a unified framework for
 	  drivers for many different types of embedded sensors using a

drivers/iio/adc/Kconfig

@@ -110,6 +110,7 @@ config AD799X
 config AT91_ADC
 	tristate "Atmel AT91 ADC"
 	depends on ARCH_AT91
+	depends on INPUT
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select SYSFS

drivers/iio/adc/max1363.c

@@ -1252,8 +1252,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.num_modes = ARRAY_SIZE(max1238_mode_list),
 		.default_mode = s0to11,
 		.info = &max1238_info,
-		.channels = max1238_channels,
-		.num_channels = ARRAY_SIZE(max1238_channels),
+		.channels = max1038_channels,
+		.num_channels = ARRAY_SIZE(max1038_channels),
 	},
 	[max11605] = {
 		.bits = 8,
@@ -1262,8 +1262,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.num_modes = ARRAY_SIZE(max1238_mode_list),
 		.default_mode = s0to11,
 		.info = &max1238_info,
-		.channels = max1238_channels,
-		.num_channels = ARRAY_SIZE(max1238_channels),
+		.channels = max1038_channels,
+		.num_channels = ARRAY_SIZE(max1038_channels),
 	},
 	[max11606] = {
 		.bits = 10,
@@ -1312,8 +1312,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.num_modes = ARRAY_SIZE(max1238_mode_list),
 		.default_mode = s0to11,
 		.info = &max1238_info,
-		.channels = max1238_channels,
-		.num_channels = ARRAY_SIZE(max1238_channels),
+		.channels = max1138_channels,
+		.num_channels = ARRAY_SIZE(max1138_channels),
 	},
 	[max11611] = {
 		.bits = 10,
@@ -1322,8 +1322,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.num_modes = ARRAY_SIZE(max1238_mode_list),
 		.default_mode = s0to11,
 		.info = &max1238_info,
-		.channels = max1238_channels,
-		.num_channels = ARRAY_SIZE(max1238_channels),
+		.channels = max1138_channels,
+		.num_channels = ARRAY_SIZE(max1138_channels),
 	},
 	[max11612] = {
 		.bits = 12,

drivers/iio/common/hid-sensors/hid-sensor-attributes.c

@@ -327,7 +327,7 @@ int hid_sensor_format_scale(u32 usage_id,
 	*val0 = 1;
 	*val1 = 0;
 
-	for (i = 0; ARRAY_SIZE(unit_conversion); ++i) {
+	for (i = 0; i < ARRAY_SIZE(unit_conversion); ++i) {
 		if (unit_conversion[i].usage_id == usage_id &&
 			unit_conversion[i].unit == attr_info->units) {
 			exp  = hid_sensor_convert_exponent(
@@ -343,15 +343,28 @@ int hid_sensor_format_scale(u32 usage_id,
 }
 EXPORT_SYMBOL(hid_sensor_format_scale);
 
-int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
+int hid_sensor_get_reporting_interval(struct hid_sensor_hub_device *hsdev,
 					u32 usage_id,
 					struct hid_sensor_common *st)
 {
-
 	sensor_hub_input_get_attribute_info(hsdev,
 					HID_FEATURE_REPORT, usage_id,
 					HID_USAGE_SENSOR_PROP_REPORT_INTERVAL,
 					&st->poll);
+	/* Default unit of measure is milliseconds */
+	if (st->poll.units == 0)
+		st->poll.units = HID_USAGE_SENSOR_UNITS_MILLISECOND;
+	return 0;
+
+}
+
+int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
+					u32 usage_id,
+					struct hid_sensor_common *st)
+{
+
+
+	hid_sensor_get_reporting_interval(hsdev, usage_id, st);
 
 	sensor_hub_input_get_attribute_info(hsdev,
 					HID_FEATURE_REPORT, usage_id,

drivers/staging/iio/Documentation/iio_utils.h

@@ -318,7 +318,7 @@ inline int build_channel_array(const char *device_dir,
 				free(filename);
 				goto error_close_dir;
 			}
-			fscanf(sysfsfp, "%u", &ret);
+			fscanf(sysfsfp, "%i", &ret);
 			if (ret == 1)
 				(*counter)++;
 			fclose(sysfsfp);
@@ -350,7 +350,7 @@ inline int build_channel_array(const char *device_dir,
 				ret = -errno;
 				goto error_cleanup_array;
 			}
-			fscanf(sysfsfp, "%u", &current_enabled);
+			fscanf(sysfsfp, "%i", &current_enabled);
 			fclose(sysfsfp);
 
 			if (!current_enabled) {