Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: Remove a warning for drivers/staging/wlan-ng/cfg80211.c
  staging: intel_sst: intelmid needs delay.h
  staging: solo6x10: add select SND_PCM to fix build error
  staging: usbip: vhci: fix oops on subsequent attach
  staging: ft1000: Remove unnecessary EXPORT_SYMBOLs
  staging: rts_pstor: use #ifdef instead of #if
  staging: rts_pstor: Add <linux/vmalloc.h>
  staging: gma500: Depend on X86
  staging: olpc: Add <linux/delay.h>

drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c

@@ -2288,7 +2288,3 @@ struct net_device *init_ft1000_card(struct pcmcia_device *link,
 	free_netdev(dev);
 	return NULL;
 }
-
-EXPORT_SYMBOL(init_ft1000_card);
-EXPORT_SYMBOL(stop_ft1000_card);
-EXPORT_SYMBOL(flarion_ft1000_cnt);

drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c

@@ -214,6 +214,3 @@ void ft1000CleanupProc(struct net_device *dev)
 	remove_proc_entry(FT1000_PROC, init_net.proc_net);
 	unregister_netdevice_notifier(&ft1000_netdev_notifier);
 }
-
-EXPORT_SYMBOL(ft1000InitProc);
-EXPORT_SYMBOL(ft1000CleanupProc);

drivers/staging/gma500/Kconfig

 config DRM_PSB
 	tristate "Intel GMA500 KMS Framebuffer"
-	depends on DRM && PCI
+	depends on DRM && PCI && X86
 	select FB_CFB_COPYAREA
         select FB_CFB_FILLRECT
         select FB_CFB_IMAGEBLIT

drivers/staging/intel_sst/intelmid_v1_control.c

@@ -28,6 +28,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/file.h>
 #include <asm/mrst.h>
 #include <sound/pcm.h>

drivers/staging/intel_sst/intelmid_v2_control.c

@@ -29,6 +29,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/file.h>
 #include "intel_sst.h"
 #include "intelmid_snd_control.h"

drivers/staging/olpc_dcon/olpc_dcon_xo_1.c

@@ -12,6 +12,7 @@
  */
 #include <linux/cs5535.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <asm/olpc.h>
 
 #include "olpc_dcon.h"

drivers/staging/rts_pstor/debug.h

@@ -28,7 +28,7 @@
 
 #define RTSX_STOR "rts_pstor: "
 
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 #define RTSX_DEBUGP(x...) printk(KERN_DEBUG RTSX_STOR x)
 #define RTSX_DEBUGPN(x...) printk(KERN_DEBUG x)
 #define RTSX_DEBUGPX(x...) printk(x)

drivers/staging/rts_pstor/ms.c

@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"

drivers/staging/rts_pstor/rtsx_chip.c

@@ -24,6 +24,7 @@
 #include <linux/kthread.h>
 #include <linux/sched.h>
 #include <linux/workqueue.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"
@@ -1311,11 +1312,11 @@ void rtsx_polling_func(struct rtsx_chip *chip)
 
 #ifdef SUPPORT_OCP
 	if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
-		#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 		if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER | MS_OC_NOW | MS_OC_EVER)) {
 			RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
 		}
-		#endif
+#endif
 
 		if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
 			if (chip->card_exist & SD_CARD) {

drivers/staging/rts_pstor/rtsx_scsi.c

@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"

drivers/staging/rts_pstor/sd.c

@@ -909,7 +909,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
 		RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
 		RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, 0);
 	} else {
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 		rtsx_read_register(chip, SD_VP_CTL, &val);
 		RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
 		rtsx_read_register(chip, SD_DCMPS_CTL, &val);
@@ -958,7 +958,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
 	return STATUS_SUCCESS;
 
 Fail:
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 	rtsx_read_register(chip, SD_VP_CTL, &val);
 	RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
 	rtsx_read_register(chip, SD_DCMPS_CTL, &val);

drivers/staging/rts_pstor/trace.h

@@ -82,7 +82,7 @@ do {													\
 #define TRACE_GOTO(chip, label)	goto label
 #endif
 
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 static inline void rtsx_dump(u8 *buf, int buf_len)
 {
 	int i;

drivers/staging/rts_pstor/xd.c

@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"

drivers/staging/solo6x10/Kconfig

@@ -2,6 +2,7 @@ config SOLO6X10
 	tristate "Softlogic 6x10 MPEG codec cards"
 	depends on PCI && VIDEO_DEV && SND && I2C
 	select VIDEOBUF_DMA_SG
+	select SND_PCM
 	---help---
 	  This driver supports the Softlogic based MPEG-4 and h.264 codec
 	  codec cards.

drivers/staging/usbip/vhci_hcd.c

@@ -876,8 +876,10 @@ static void vhci_shutdown_connection(struct usbip_device *ud)
 	}
 
 	/* kill threads related to this sdev, if v.c. exists */
-	kthread_stop(vdev->ud.tcp_rx);
-	kthread_stop(vdev->ud.tcp_tx);
+	if (vdev->ud.tcp_rx)
+		kthread_stop(vdev->ud.tcp_rx);
+	if (vdev->ud.tcp_tx)
+		kthread_stop(vdev->ud.tcp_tx);
 
 	usbip_uinfo("stop threads\n");
 
@@ -949,9 +951,6 @@ static void vhci_device_init(struct vhci_device *vdev)
 {
 	memset(vdev, 0, sizeof(*vdev));
 
-	vdev->ud.tcp_rx = kthread_create(vhci_rx_loop, &vdev->ud, "vhci_rx");
-	vdev->ud.tcp_tx = kthread_create(vhci_tx_loop, &vdev->ud, "vhci_tx");
-
 	vdev->ud.side   = USBIP_VHCI;
 	vdev->ud.status = VDEV_ST_NULL;
 	/* vdev->ud.lock   = SPIN_LOCK_UNLOCKED; */

drivers/staging/usbip/vhci_sysfs.c

@@ -21,6 +21,7 @@
 #include "vhci.h"
 
 #include <linux/in.h>
+#include <linux/kthread.h>
 
 /* TODO: refine locking ?*/
 
@@ -220,13 +221,13 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
 	vdev->ud.tcp_socket = socket;
 	vdev->ud.status     = VDEV_ST_NOTASSIGNED;
 
-	wake_up_process(vdev->ud.tcp_rx);
-	wake_up_process(vdev->ud.tcp_tx);
-
 	spin_unlock(&vdev->ud.lock);
 	spin_unlock(&the_controller->lock);
 	/* end the lock */
 
+	vdev->ud.tcp_rx = kthread_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
+	vdev->ud.tcp_tx = kthread_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
+
 	rh_port_connect(rhport, speed);
 
 	return count;

drivers/staging/wlan-ng/cfg80211.c

@@ -273,7 +273,7 @@ int prism2_del_key(struct wiphy *wiphy, struct net_device *dev,
 }
 
 int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
-			   u8 key_index)
+			   u8 key_index, bool unicast, bool multicast)
 {
 	wlandevice_t *wlandev = dev->ml_priv;