Merge branch 'be2net-next'

Sathya Perla says:

====================
be2net: patch set

Hi David, as the below patch-set includes minor bug fixes and some
code re-org, pls consider applying it to the "net-next" tree. Thanks!

Patch 1 fixes a bit of code duplication involving interface object
creation code.

Patch 2 ensures that when a flow-control FW cmd fails, the adapter state
continues to reflect the old values. This allows for correct reporting
on subsequent ethtool "get".

Patch 3 returns proper error for link config change on BE3/Lancer

Patch 4 adds a kernel log message for FW boot error on Lancer

Patch 5 adds a function reset on Lancer as a part of the function init
sequence.

Patch 6 moves some FW-cmd definitions that belong in be_cmds.h, but
were placed in be_hw.h

Patch 7 resets the "bw_min" field while configuring "bw_max" needed
for TX rate limiting config.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -573,7 +573,7 @@ static int lancer_wait_ready(struct be_adapter *adapter)
 {
 #define SLIPORT_READY_TIMEOUT 30
 	u32 sliport_status;
-	int status = 0, i;
+	int i;
 
 	for (i = 0; i < SLIPORT_READY_TIMEOUT; i++) {
 		sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
@@ -584,9 +584,9 @@ static int lancer_wait_ready(struct be_adapter *adapter)
 	}
 
 	if (i == SLIPORT_READY_TIMEOUT)
-		status = -1;
+		return sliport_status ? : -1;
 
-	return status;
+	return 0;
 }
 
 static bool lancer_provisioning_error(struct be_adapter *adapter)
@@ -624,7 +624,7 @@ int lancer_test_and_set_rdy_state(struct be_adapter *adapter)
 			iowrite32(SLI_PORT_CONTROL_IP_MASK,
 				  adapter->db + SLIPORT_CONTROL_OFFSET);
 
-			/* check adapter has corrected the error */
+			/* check if adapter has corrected the error */
 			status = lancer_wait_ready(adapter);
 			sliport_status = ioread32(adapter->db +
 						  SLIPORT_STATUS_OFFSET);
@@ -655,7 +655,11 @@ int be_fw_wait_ready(struct be_adapter *adapter)
 
 	if (lancer_chip(adapter)) {
 		status = lancer_wait_ready(adapter);
-		return status;
+		if (status) {
+			stage = status;
+			goto err;
+		}
+		return 0;
 	}
 
 	do {
@@ -671,7 +675,8 @@ int be_fw_wait_ready(struct be_adapter *adapter)
 		timeout += 2;
 	} while (timeout < 60);
 
-	dev_err(dev, "POST timeout; stage=0x%x\n", stage);
+err:
+	dev_err(dev, "POST timeout; stage=%#x\n", stage);
 	return -1;
 }
 
@@ -3751,6 +3756,7 @@ int be_cmd_config_qos(struct be_adapter *adapter, u32 max_rate, u16 link_speed,
 	be_reset_nic_desc(&nic_desc);
 	nic_desc.pf_num = adapter->pf_number;
 	nic_desc.vf_num = domain;
+	nic_desc.bw_min = 0;
 	if (lancer_chip(adapter)) {
 		nic_desc.hdr.desc_type = NIC_RESOURCE_DESC_TYPE_V0;
 		nic_desc.hdr.desc_len = RESOURCE_DESC_SIZE_V0;
@@ -4092,7 +4098,7 @@ int be_cmd_set_logical_link_config(struct be_adapter *adapter,
 	int status;
 
 	if (BEx_chip(adapter) || lancer_chip(adapter))
-		return 0;
+		return -EOPNOTSUPP;
 
 	spin_lock_bh(&adapter->mcc_lock);
 

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -1161,7 +1161,167 @@ struct be_cmd_resp_get_beacon_state {
 	u8 rsvd0[3];
 } __packed;
 
+/* Flashrom related descriptors */
+#define MAX_FLASH_COMP			32
+
+#define OPTYPE_ISCSI_ACTIVE		0
+#define OPTYPE_REDBOOT			1
+#define OPTYPE_BIOS			2
+#define OPTYPE_PXE_BIOS			3
+#define OPTYPE_FCOE_BIOS		8
+#define OPTYPE_ISCSI_BACKUP		9
+#define OPTYPE_FCOE_FW_ACTIVE		10
+#define OPTYPE_FCOE_FW_BACKUP		11
+#define OPTYPE_NCSI_FW			13
+#define OPTYPE_REDBOOT_DIR		18
+#define OPTYPE_REDBOOT_CONFIG		19
+#define OPTYPE_SH_PHY_FW		21
+#define OPTYPE_FLASHISM_JUMPVECTOR	22
+#define OPTYPE_UFI_DIR			23
+#define OPTYPE_PHY_FW			99
+
+#define FLASH_BIOS_IMAGE_MAX_SIZE_g2	262144  /* Max OPTION ROM image sz */
+#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g2	262144  /* Max Redboot image sz    */
+#define FLASH_IMAGE_MAX_SIZE_g2		1310720 /* Max firmware image size */
+
+#define FLASH_NCSI_IMAGE_MAX_SIZE_g3	262144
+#define FLASH_PHY_FW_IMAGE_MAX_SIZE_g3	262144
+#define FLASH_BIOS_IMAGE_MAX_SIZE_g3	524288  /* Max OPTION ROM image sz */
+#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	1048576 /* Max Redboot image sz    */
+#define FLASH_IMAGE_MAX_SIZE_g3		2097152 /* Max firmware image size */
+
+/* Offsets for components on Flash. */
+#define FLASH_REDBOOT_START_g2			0
+#define FLASH_FCoE_BIOS_START_g2		524288
+#define FLASH_iSCSI_PRIMARY_IMAGE_START_g2	1048576
+#define FLASH_iSCSI_BACKUP_IMAGE_START_g2	2359296
+#define FLASH_FCoE_PRIMARY_IMAGE_START_g2	3670016
+#define FLASH_FCoE_BACKUP_IMAGE_START_g2	4980736
+#define FLASH_iSCSI_BIOS_START_g2		7340032
+#define FLASH_PXE_BIOS_START_g2			7864320
+
+#define FLASH_REDBOOT_START_g3			262144
+#define FLASH_PHY_FW_START_g3			1310720
+#define FLASH_iSCSI_PRIMARY_IMAGE_START_g3	2097152
+#define FLASH_iSCSI_BACKUP_IMAGE_START_g3	4194304
+#define FLASH_FCoE_PRIMARY_IMAGE_START_g3	6291456
+#define FLASH_FCoE_BACKUP_IMAGE_START_g3	8388608
+#define FLASH_iSCSI_BIOS_START_g3		12582912
+#define FLASH_PXE_BIOS_START_g3			13107200
+#define FLASH_FCoE_BIOS_START_g3		13631488
+#define FLASH_NCSI_START_g3			15990784
+
+#define IMAGE_NCSI			16
+#define IMAGE_OPTION_ROM_PXE		32
+#define IMAGE_OPTION_ROM_FCoE		33
+#define IMAGE_OPTION_ROM_ISCSI		34
+#define IMAGE_FLASHISM_JUMPVECTOR	48
+#define IMAGE_FIRMWARE_iSCSI		160
+#define IMAGE_FIRMWARE_FCoE		162
+#define IMAGE_FIRMWARE_BACKUP_iSCSI	176
+#define IMAGE_FIRMWARE_BACKUP_FCoE	178
+#define IMAGE_FIRMWARE_PHY		192
+#define IMAGE_REDBOOT_DIR		208
+#define IMAGE_REDBOOT_CONFIG		209
+#define IMAGE_UFI_DIR			210
+#define IMAGE_BOOT_CODE			224
+
+struct controller_id {
+	u32 vendor;
+	u32 device;
+	u32 subvendor;
+	u32 subdevice;
+};
+
+struct flash_comp {
+	unsigned long offset;
+	int optype;
+	int size;
+	int img_type;
+};
+
+struct image_hdr {
+	u32 imageid;
+	u32 imageoffset;
+	u32 imagelength;
+	u32 image_checksum;
+	u8 image_version[32];
+};
+
+struct flash_file_hdr_g2 {
+	u8 sign[32];
+	u32 cksum;
+	u32 antidote;
+	struct controller_id cont_id;
+	u32 file_len;
+	u32 chunk_num;
+	u32 total_chunks;
+	u32 num_imgs;
+	u8 build[24];
+};
+
+struct flash_file_hdr_g3 {
+	u8 sign[52];
+	u8 ufi_version[4];
+	u32 file_len;
+	u32 cksum;
+	u32 antidote;
+	u32 num_imgs;
+	u8 build[24];
+	u8 asic_type_rev;
+	u8 rsvd[31];
+};
+
+struct flash_section_hdr {
+	u32 format_rev;
+	u32 cksum;
+	u32 antidote;
+	u32 num_images;
+	u8 id_string[128];
+	u32 rsvd[4];
+} __packed;
+
+struct flash_section_hdr_g2 {
+	u32 format_rev;
+	u32 cksum;
+	u32 antidote;
+	u32 build_num;
+	u8 id_string[128];
+	u32 rsvd[8];
+} __packed;
+
+struct flash_section_entry {
+	u32 type;
+	u32 offset;
+	u32 pad_size;
+	u32 image_size;
+	u32 cksum;
+	u32 entry_point;
+	u16 optype;
+	u16 rsvd0;
+	u32 rsvd1;
+	u8 ver_data[32];
+} __packed;
+
+struct flash_section_info {
+	u8 cookie[32];
+	struct flash_section_hdr fsec_hdr;
+	struct flash_section_entry fsec_entry[32];
+} __packed;
+
+struct flash_section_info_g2 {
+	u8 cookie[32];
+	struct flash_section_hdr_g2 fsec_hdr;
+	struct flash_section_entry fsec_entry[32];
+} __packed;
+
 /****************** Firmware Flash ******************/
+#define FLASHROM_OPER_FLASH		1
+#define FLASHROM_OPER_SAVE		2
+#define FLASHROM_OPER_REPORT		4
+#define FLASHROM_OPER_PHY_FLASH		9
+#define FLASHROM_OPER_PHY_SAVE		10
+
 struct flashrom_params {
 	u32 op_code;
 	u32 op_type;
@@ -1366,6 +1526,7 @@ enum {
 	PHY_TYPE_QSFP,
 	PHY_TYPE_KR4_40GB,
 	PHY_TYPE_KR2_20GB,
+	PHY_TYPE_TN_8022,
 	PHY_TYPE_DISABLED = 255
 };
 
@@ -1429,6 +1590,20 @@ struct be_cmd_req_set_qos {
 };
 
 /*********************** Controller Attributes ***********************/
+struct mgmt_hba_attribs {
+	u32 rsvd0[24];
+	u8 controller_model_number[32];
+	u32 rsvd1[79];
+	u8 rsvd2[3];
+	u8 phy_port;
+	u32 rsvd3[13];
+} __packed;
+
+struct mgmt_controller_attrib {
+	struct mgmt_hba_attribs hba_attribs;
+	u32 rsvd0[10];
+} __packed;
+
 struct be_cmd_req_cntl_attribs {
 	struct be_cmd_req_hdr hdr;
 };

drivers/net/ethernet/emulex/benet/be_ethtool.c

@@ -705,15 +705,17 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
 
 	if (ecmd->autoneg != adapter->phy.fc_autoneg)
 		return -EINVAL;
-	adapter->tx_fc = ecmd->tx_pause;
-	adapter->rx_fc = ecmd->rx_pause;
 
-	status = be_cmd_set_flow_control(adapter,
-					 adapter->tx_fc, adapter->rx_fc);
-	if (status)
+	status = be_cmd_set_flow_control(adapter, ecmd->tx_pause,
+					 ecmd->rx_pause);
+	if (status) {
 		dev_warn(&adapter->pdev->dev, "Pause param set failed\n");
+		return be_cmd_status(status);
+	}
 
-	return be_cmd_status(status);
+	adapter->tx_fc = ecmd->tx_pause;
+	adapter->rx_fc = ecmd->rx_pause;
+	return 0;
 }
 
 static int be_set_phys_id(struct net_device *netdev,

drivers/net/ethernet/emulex/benet/be_hw.h

@@ -171,94 +171,6 @@
 #define RETRIEVE_FAT	0
 #define QUERY_FAT	1
 
-/* Flashrom related descriptors */
-#define MAX_FLASH_COMP			32
-#define IMAGE_TYPE_FIRMWARE		160
-#define IMAGE_TYPE_BOOTCODE		224
-#define IMAGE_TYPE_OPTIONROM		32
-
-#define NUM_FLASHDIR_ENTRIES		32
-
-#define OPTYPE_ISCSI_ACTIVE		0
-#define OPTYPE_REDBOOT			1
-#define OPTYPE_BIOS			2
-#define OPTYPE_PXE_BIOS			3
-#define OPTYPE_FCOE_BIOS		8
-#define OPTYPE_ISCSI_BACKUP		9
-#define OPTYPE_FCOE_FW_ACTIVE		10
-#define OPTYPE_FCOE_FW_BACKUP		11
-#define OPTYPE_NCSI_FW			13
-#define OPTYPE_REDBOOT_DIR		18
-#define OPTYPE_REDBOOT_CONFIG		19
-#define OPTYPE_SH_PHY_FW		21
-#define OPTYPE_FLASHISM_JUMPVECTOR	22
-#define OPTYPE_UFI_DIR			23
-#define OPTYPE_PHY_FW			99
-#define TN_8022				13
-
-#define FLASHROM_OPER_PHY_FLASH		9
-#define FLASHROM_OPER_PHY_SAVE		10
-#define FLASHROM_OPER_FLASH		1
-#define FLASHROM_OPER_SAVE		2
-#define FLASHROM_OPER_REPORT		4
-
-#define FLASH_IMAGE_MAX_SIZE_g2		(1310720) /* Max firmware image size */
-#define FLASH_BIOS_IMAGE_MAX_SIZE_g2	(262144)  /* Max OPTION ROM image sz */
-#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g2	(262144)  /* Max Redboot image sz    */
-#define FLASH_IMAGE_MAX_SIZE_g3		(2097152) /* Max firmware image size */
-#define FLASH_BIOS_IMAGE_MAX_SIZE_g3	(524288)  /* Max OPTION ROM image sz */
-#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	(1048576)  /* Max Redboot image sz    */
-#define FLASH_NCSI_IMAGE_MAX_SIZE_g3	(262144)
-#define FLASH_PHY_FW_IMAGE_MAX_SIZE_g3	262144
-
-#define FLASH_NCSI_MAGIC		(0x16032009)
-#define FLASH_NCSI_DISABLED		(0)
-#define FLASH_NCSI_ENABLED		(1)
-
-#define FLASH_NCSI_BITFILE_HDR_OFFSET	(0x600000)
-
-/* Offsets for components on Flash. */
-#define FLASH_iSCSI_PRIMARY_IMAGE_START_g2 (1048576)
-#define FLASH_iSCSI_BACKUP_IMAGE_START_g2  (2359296)
-#define FLASH_FCoE_PRIMARY_IMAGE_START_g2  (3670016)
-#define FLASH_FCoE_BACKUP_IMAGE_START_g2   (4980736)
-#define FLASH_iSCSI_BIOS_START_g2          (7340032)
-#define FLASH_PXE_BIOS_START_g2            (7864320)
-#define FLASH_FCoE_BIOS_START_g2           (524288)
-#define FLASH_REDBOOT_START_g2		  (0)
-
-#define FLASH_NCSI_START_g3		   (15990784)
-#define FLASH_iSCSI_PRIMARY_IMAGE_START_g3 (2097152)
-#define FLASH_iSCSI_BACKUP_IMAGE_START_g3  (4194304)
-#define FLASH_FCoE_PRIMARY_IMAGE_START_g3  (6291456)
-#define FLASH_FCoE_BACKUP_IMAGE_START_g3   (8388608)
-#define FLASH_iSCSI_BIOS_START_g3          (12582912)
-#define FLASH_PXE_BIOS_START_g3            (13107200)
-#define FLASH_FCoE_BIOS_START_g3           (13631488)
-#define FLASH_REDBOOT_START_g3             (262144)
-#define FLASH_PHY_FW_START_g3		   1310720
-
-#define IMAGE_NCSI			16
-#define IMAGE_OPTION_ROM_PXE		32
-#define IMAGE_OPTION_ROM_FCoE		33
-#define IMAGE_OPTION_ROM_ISCSI		34
-#define IMAGE_FLASHISM_JUMPVECTOR	48
-#define IMAGE_FLASH_ISM			49
-#define IMAGE_JUMP_VECTOR		50
-#define IMAGE_FIRMWARE_iSCSI		160
-#define IMAGE_FIRMWARE_COMP_iSCSI	161
-#define IMAGE_FIRMWARE_FCoE		162
-#define IMAGE_FIRMWARE_COMP_FCoE	163
-#define IMAGE_FIRMWARE_BACKUP_iSCSI	176
-#define IMAGE_FIRMWARE_BACKUP_COMP_iSCSI 177
-#define IMAGE_FIRMWARE_BACKUP_FCoE	178
-#define IMAGE_FIRMWARE_BACKUP_COMP_FCoE 179
-#define IMAGE_FIRMWARE_PHY		192
-#define IMAGE_REDBOOT_DIR		208
-#define IMAGE_REDBOOT_CONFIG		209
-#define IMAGE_UFI_DIR			210
-#define IMAGE_BOOT_CODE			224
-
 /************* Rx Packet Type Encoding **************/
 #define BE_UNICAST_PACKET		0
 #define BE_MULTICAST_PACKET		1
@@ -440,138 +352,3 @@ struct amap_eth_rx_compl_v1 {
 struct be_eth_rx_compl {
 	u32 dw[4];
 };
-
-struct mgmt_hba_attribs {
-	u8 flashrom_version_string[32];
-	u8 manufacturer_name[32];
-	u32 supported_modes;
-	u32 rsvd0[3];
-	u8 ncsi_ver_string[12];
-	u32 default_extended_timeout;
-	u8 controller_model_number[32];
-	u8 controller_description[64];
-	u8 controller_serial_number[32];
-	u8 ip_version_string[32];
-	u8 firmware_version_string[32];
-	u8 bios_version_string[32];
-	u8 redboot_version_string[32];
-	u8 driver_version_string[32];
-	u8 fw_on_flash_version_string[32];
-	u32 functionalities_supported;
-	u16 max_cdblength;
-	u8 asic_revision;
-	u8 generational_guid[16];
-	u8 hba_port_count;
-	u16 default_link_down_timeout;
-	u8 iscsi_ver_min_max;
-	u8 multifunction_device;
-	u8 cache_valid;
-	u8 hba_status;
-	u8 max_domains_supported;
-	u8 phy_port;
-	u32 firmware_post_status;
-	u32 hba_mtu[8];
-	u32 rsvd1[4];
-};
-
-struct mgmt_controller_attrib {
-	struct mgmt_hba_attribs hba_attribs;
-	u16 pci_vendor_id;
-	u16 pci_device_id;
-	u16 pci_sub_vendor_id;
-	u16 pci_sub_system_id;
-	u8 pci_bus_number;
-	u8 pci_device_number;
-	u8 pci_function_number;
-	u8 interface_type;
-	u64 unique_identifier;
-	u32 rsvd0[5];
-};
-
-struct controller_id {
-	u32 vendor;
-	u32 device;
-	u32 subvendor;
-	u32 subdevice;
-};
-
-struct flash_comp {
-	unsigned long offset;
-	int optype;
-	int size;
-	int img_type;
-};
-
-struct image_hdr {
-	u32 imageid;
-	u32 imageoffset;
-	u32 imagelength;
-	u32 image_checksum;
-	u8 image_version[32];
-};
-struct flash_file_hdr_g2 {
-	u8 sign[32];
-	u32 cksum;
-	u32 antidote;
-	struct controller_id cont_id;
-	u32 file_len;
-	u32 chunk_num;
-	u32 total_chunks;
-	u32 num_imgs;
-	u8 build[24];
-};
-
-struct flash_file_hdr_g3 {
-	u8 sign[52];
-	u8 ufi_version[4];
-	u32 file_len;
-	u32 cksum;
-	u32 antidote;
-	u32 num_imgs;
-	u8 build[24];
-	u8 asic_type_rev;
-	u8 rsvd[31];
-};
-
-struct flash_section_hdr {
-	u32 format_rev;
-	u32 cksum;
-	u32 antidote;
-	u32 num_images;
-	u8 id_string[128];
-	u32 rsvd[4];
-} __packed;
-
-struct flash_section_hdr_g2 {
-	u32 format_rev;
-	u32 cksum;
-	u32 antidote;
-	u32 build_num;
-	u8 id_string[128];
-	u32 rsvd[8];
-} __packed;
-
-struct flash_section_entry {
-	u32 type;
-	u32 offset;
-	u32 pad_size;
-	u32 image_size;
-	u32 cksum;
-	u32 entry_point;
-	u16 optype;
-	u16 rsvd0;
-	u32 rsvd1;
-	u8 ver_data[32];
-} __packed;
-
-struct flash_section_info {
-	u8 cookie[32];
-	struct flash_section_hdr fsec_hdr;
-	struct flash_section_entry fsec_entry[32];
-} __packed;
-
-struct flash_section_info_g2 {
-	u8 cookie[32];
-	struct flash_section_hdr_g2 fsec_hdr;
-	struct flash_section_entry fsec_entry[32];
-} __packed;

drivers/net/ethernet/emulex/benet/be_main.c

@@ -3183,13 +3183,32 @@ static int be_clear(struct be_adapter *adapter)
 	return 0;
 }
 
+static int be_if_create(struct be_adapter *adapter, u32 *if_handle,
+			u32 cap_flags, u32 vf)
+{
+	u32 en_flags;
+	int status;
+
+	en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
+		   BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_PASS_L3L4_ERRORS |
+		   BE_IF_FLAGS_RSS;
+
+	en_flags &= cap_flags;
+
+	status = be_cmd_if_create(adapter, cap_flags, en_flags,
+				  if_handle, vf);
+
+	return status;
+}
+
 static int be_vfs_if_create(struct be_adapter *adapter)
 {
 	struct be_resources res = {0};
 	struct be_vf_cfg *vf_cfg;
-	u32 cap_flags, en_flags, vf;
-	int status = 0;
+	u32 cap_flags, vf;
+	int status;
 
+	/* If a FW profile exists, then cap_flags are updated */
 	cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
 		    BE_IF_FLAGS_MULTICAST;
 
@@ -3201,18 +3220,13 @@ static int be_vfs_if_create(struct be_adapter *adapter)
 				cap_flags = res.if_cap_flags;
 		}
 
-		/* If a FW profile exists, then cap_flags are updated */
-		en_flags = cap_flags & (BE_IF_FLAGS_UNTAGGED |
-					BE_IF_FLAGS_BROADCAST |
-					BE_IF_FLAGS_MULTICAST);
-		status =
-		    be_cmd_if_create(adapter, cap_flags, en_flags,
-				     &vf_cfg->if_handle, vf + 1);
+		status = be_if_create(adapter, &vf_cfg->if_handle,
+				      cap_flags, vf + 1);
 		if (status)
-			goto err;
+			return status;
 	}
-err:
-	return status;
+
+	return 0;
 }
 
 static int be_vf_setup_init(struct be_adapter *adapter)
@@ -3653,7 +3667,6 @@ int be_update_queues(struct be_adapter *adapter)
 static int be_setup(struct be_adapter *adapter)
 {
 	struct device *dev = &adapter->pdev->dev;
-	u32 tx_fc, rx_fc, en_flags;
 	int status;
 
 	be_setup_init(adapter);
@@ -3669,13 +3682,8 @@ static int be_setup(struct be_adapter *adapter)
 	if (status)
 		goto err;
 
-	en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
-		   BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_PASS_L3L4_ERRORS;
-	if (adapter->function_caps & BE_FUNCTION_CAPS_RSS)
-		en_flags |= BE_IF_FLAGS_RSS;
-	en_flags = en_flags & be_if_cap_flags(adapter);
-	status = be_cmd_if_create(adapter, be_if_cap_flags(adapter), en_flags,
-				  &adapter->if_handle, 0);
+	status = be_if_create(adapter, &adapter->if_handle,
+			      be_if_cap_flags(adapter), 0);
 	if (status)
 		goto err;
 
@@ -3708,11 +3716,14 @@ static int be_setup(struct be_adapter *adapter)
 
 	be_cmd_get_acpi_wol_cap(adapter);
 
-	be_cmd_get_flow_control(adapter, &tx_fc, &rx_fc);
+	status = be_cmd_set_flow_control(adapter, adapter->tx_fc,
+					 adapter->rx_fc);
+	if (status)
+		be_cmd_get_flow_control(adapter, &adapter->tx_fc,
+					&adapter->rx_fc);
 
-	if (rx_fc != adapter->rx_fc || tx_fc != adapter->tx_fc)
-		be_cmd_set_flow_control(adapter, adapter->tx_fc,
-					adapter->rx_fc);
+	dev_info(&adapter->pdev->dev, "HW Flow control - TX:%d RX:%d\n",
+		 adapter->tx_fc, adapter->rx_fc);
 
 	if (be_physfn(adapter))
 		be_cmd_set_logical_link_config(adapter,
@@ -3751,7 +3762,7 @@ static char flash_cookie[2][16] = {"*** SE FLAS", "H DIRECTORY *** "};
 
 static bool phy_flashing_required(struct be_adapter *adapter)
 {
-	return (adapter->phy.phy_type == TN_8022 &&
+	return (adapter->phy.phy_type == PHY_TYPE_TN_8022 &&
 		adapter->phy.interface_type == PHY_TYPE_BASET_10GB);
 }
 
@@ -5060,6 +5071,10 @@ static int be_resume(struct pci_dev *pdev)
 	if (status)
 		return status;
 
+	status = be_cmd_reset_function(adapter);
+	if (status)
+		return status;
+
 	be_intr_set(adapter, true);
 	/* tell fw we're ready to fire cmds */
 	status = be_cmd_fw_init(adapter);