dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY

Split out the dt bindings for USB3 DP PHY from qcom,qmp bindings
for modularity.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Link: https://lore.kernel.org/r/1589510358-3865-3-git-send-email-sanm@codeaurora.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml

@@ -27,21 +27,13 @@ properties:
       - qcom,sdm845-qhp-pcie-phy
       - qcom,sdm845-qmp-pcie-phy
       - qcom,sdm845-qmp-ufs-phy
-      - qcom,sdm845-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sm8150-qmp-ufs-phy
       - qcom,sm8250-qmp-ufs-phy
 
   reg:
-    minItems: 1
     items:
       - description: Address and length of PHY's common serdes block.
-      - description: Address and length of the DP_COM control block.
-
-  reg-names:
-    items:
-      - const: reg-base
-      - const: dp_com
 
   "#clock-cells":
      enum: [ 1, 2 ]
@@ -110,7 +102,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sdm845-qmp-usb3-phy
               - qcom,sdm845-qmp-usb3-uni-phy
     then:
       properties:
@@ -284,51 +275,39 @@ allOf:
         reset-names:
           items:
             - const: phy
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: qcom,sdm845-qmp-usb3-phy
-    then:
-      required:
-        - reg-names
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-    usb_1_qmpphy: phy-wrapper@88e9000 {
-        compatible = "qcom,sdm845-qmp-usb3-phy";
-        reg = <0 0x088e9000 0 0x18c>,
-              <0 0x088e8000 0 0x10>;
-        reg-names = "reg-base", "dp_com";
+    usb_2_qmpphy: phy-wrapper@88eb000 {
+        compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+        reg = <0 0x088eb000 0 0x18c>;
         #clock-cells = <1>;
         #address-cells = <2>;
         #size-cells = <2>;
 
-        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+        clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >,
                  <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+                 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+                 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
         clock-names = "aux", "cfg_ahb", "ref", "com_aux";
 
-        resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-                 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+        resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+                 <&gcc GCC_USB3_PHY_SEC_BCR>;
         reset-names = "phy", "common";
 
         vdda-phy-supply = <&vdda_usb2_ss_1p2>;
         vdda-pll-supply = <&vdda_usb2_ss_core>;
 
-        usb_1_ssphy: phy@88e9200 {
-                reg = <0 0x088e9200 0 0x128>,
-                      <0 0x088e9400 0 0x200>,
-                      <0 0x088e9c00 0 0x218>,
-                      <0 0x088e9600 0 0x128>,
-                      <0 0x088e9800 0 0x200>,
-                      <0 0x088e9a00 0 0x100>;
+        usb_2_ssphy: phy@88eb200 {
+                reg = <0 0x088eb200 0 0x128>,
+                      <0 0x088eb400 0 0x1fc>,
+                      <0 0x088eb800 0 0x218>,
+                      <0 0x088eb600 0 0x70>;
                 #clock-cells = <0>;
                 #phy-cells = <0>;
-                clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+                clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
                 clock-names = "pipe0";
-                clock-output-names = "usb3_phy_pipe_clk_src";
+                clock-output-names = "usb3_uni_phy_pipe_clk_src";
             };
         };

Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QMP USB3 DP PHY controller
+
+maintainers:
+  - Manu Gautam <mgautam@codeaurora.org>
+
+properties:
+  compatible:
+    const:
+      qcom,sdm845-qmp-usb3-phy
+  reg:
+    items:
+      - description: Address and length of PHY's common serdes block.
+      - description: Address and length of the DP_COM control block.
+
+  reg-names:
+    items:
+      - const: reg-base
+      - const: dp_com
+
+  "#clock-cells":
+     enum: [ 1, 2 ]
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  clocks:
+    items:
+      - description: Phy aux clock.
+      - description: Phy config clock.
+      - description: 19.2 MHz ref clk.
+      - description: Phy common block aux clock.
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+      - const: com_aux
+
+  resets:
+    items:
+      - description: reset of phy block.
+      - description: phy common block reset.
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+
+  vdda-phy-supply:
+    description:
+        Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+        Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  vddp-ref-clk-supply:
+    description:
+        Phandle to a regulator supply to any specific refclk
+        pll block.
+
+#Required nodes:
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description:
+      Each device node of QMP phy is required to have as many child nodes as
+      the number of lanes the PHY has.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#clock-cells"
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    usb_1_qmpphy: phy-wrapper@88e9000 {
+        compatible = "qcom,sdm845-qmp-usb3-phy";
+        reg = <0 0x088e9000 0 0x18c>,
+              <0 0x088e8000 0 0x10>;
+        reg-names = "reg-base", "dp_com";
+        #clock-cells = <1>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+        resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+                 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+        vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+        usb_1_ssphy: phy@88e9200 {
+                reg = <0 0x088e9200 0 0x128>,
+                      <0 0x088e9400 0 0x200>,
+                      <0 0x088e9c00 0 0x218>,
+                      <0 0x088e9600 0 0x128>,
+                      <0 0x088e9800 0 0x200>,
+                      <0 0x088e9a00 0 0x100>;
+                #clock-cells = <0>;
+                #phy-cells = <0>;
+                clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+                clock-names = "pipe0";
+                clock-output-names = "usb3_phy_pipe_clk_src";
+            };
+        };