Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6: (21 commits)
  power_supply: Add MAX17042 Fuel Gauge Driver
  olpc_battery: Fix up XO-1.5 properties list
  olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOW
  olpc_battery: Add support for CHARGE_NOW
  olpc_battery: Add support for CHARGE_FULL_DESIGN
  olpc_battery: Ambient temperature is not available on XO-1.5
  jz4740-battery: Should include linux/io.h
  s3c_adc_battery: Add gpio_inverted field to pdata
  power_supply: Don't use flush_scheduled_work()
  power_supply: Fix use after free and memory leak
  gpio-charger: Fix potential race between irq handler and probe/remove
  gpio-charger: Provide default name for the power_supply
  gpio-charger: Check result of kzalloc
  jz4740-battery: Check if platform_data is supplied
  isp1704_charger: Detect charger after probe
  isp1704_charger: Set isp->dev before anything needs it
  isp1704_charger: Detect HUB/Host chargers
  isp1704_charger: Correct length for storing model
  power_supply: Add gpio charger driver
  jz4740-battery: Protect against concurrent battery readings
  ...

drivers/power/Kconfig

@@ -136,6 +136,16 @@ config BATTERY_MAX17040
 	  in handheld and portable equipment. The MAX17040 is configured
 	  to operate with a single lithium cell
 
+config BATTERY_MAX17042
+	tristate "Maxim MAX17042/8997/8966 Fuel Gauge"
+	depends on I2C
+	help
+	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
+	  in handheld and portable equipment. The MAX17042 is configured
+	  to operate with a single lithium cell. MAX8997 and MAX8966 are
+	  multi-function devices that include fuel gauages that are compatible
+	  with MAX17042.
+
 config BATTERY_Z2
 	tristate "Z2 battery driver"
 	depends on I2C && MACH_ZIPIT2
@@ -185,4 +195,14 @@ config CHARGER_TWL4030
 	help
 	  Say Y here to enable support for TWL4030 Battery Charge Interface.
 
+config CHARGER_GPIO
+	tristate "GPIO charger"
+	depends on GPIOLIB
+	help
+	  Say Y to include support for chargers which report their online status
+	  through a GPIO pin.
+
+	  This driver can be build as a module. If so, the module will be
+	  called gpio-charger.
+
 endif # POWER_SUPPLY

drivers/power/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_BATTERY_BQ20Z75)	+= bq20z75.o
 obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
+obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
 obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
@@ -32,3 +33,4 @@ obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
 obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
+obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o

drivers/power/collie_battery.c

@@ -295,7 +295,7 @@ static struct {
 static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state)
 {
 	/* flush all pending status updates */
-	flush_scheduled_work();
+	flush_work_sync(&bat_work);
 	return 0;
 }
 
@@ -362,7 +362,7 @@ static int __devinit collie_bat_probe(struct ucb1x00_dev *dev)
 err_psy_reg_main:
 
 	/* see comment in collie_bat_remove */
-	flush_scheduled_work();
+	cancel_work_sync(&bat_work);
 
 	i--;
 err_gpio:
@@ -382,12 +382,11 @@ static void __devexit collie_bat_remove(struct ucb1x00_dev *dev)
 	power_supply_unregister(&collie_bat_main.psy);
 
 	/*
-	 * now flush all pending work.
-	 * we won't get any more schedules, since all
-	 * sources (isr and external_power_changed)
-	 * are unregistered now.
+	 * Now cancel the bat_work.  We won't get any more schedules,
+	 * since all sources (isr and external_power_changed) are
+	 * unregistered now.
 	 */
-	flush_scheduled_work();
+	cancel_work_sync(&bat_work);
 
 	for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
 		gpio_free(gpios[i].gpio);

drivers/power/ds2760_battery.c

@@ -212,7 +212,7 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
 	if (di->rem_capacity > 100)
 		di->rem_capacity = 100;
 
-	if (di->current_uA >= 100L)
+	if (di->current_uA < -100L)
 		di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L)
 					/ (di->current_uA / 100L);
 	else

drivers/power/gpio-charger.c

+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  Driver for chargers which report their online status through a GPIO pin
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include <linux/power/gpio-charger.h>
+
+struct gpio_charger {
+	const struct gpio_charger_platform_data *pdata;
+	unsigned int irq;
+
+	struct power_supply charger;
+};
+
+static irqreturn_t gpio_charger_irq(int irq, void *devid)
+{
+	struct power_supply *charger = devid;
+
+	power_supply_changed(charger);
+
+	return IRQ_HANDLED;
+}
+
+static inline struct gpio_charger *psy_to_gpio_charger(struct power_supply *psy)
+{
+	return container_of(psy, struct gpio_charger, charger);
+}
+
+static int gpio_charger_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
+	const struct gpio_charger_platform_data *pdata = gpio_charger->pdata;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = gpio_get_value(pdata->gpio);
+		val->intval ^= pdata->gpio_active_low;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property gpio_charger_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int __devinit gpio_charger_probe(struct platform_device *pdev)
+{
+	const struct gpio_charger_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_charger *gpio_charger;
+	struct power_supply *charger;
+	int ret;
+	int irq;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data\n");
+		return -EINVAL;
+	}
+
+	if (!gpio_is_valid(pdata->gpio)) {
+		dev_err(&pdev->dev, "Invalid gpio pin\n");
+		return -EINVAL;
+	}
+
+	gpio_charger = kzalloc(sizeof(*gpio_charger), GFP_KERNEL);
+	if (!gpio_charger) {
+		dev_err(&pdev->dev, "Failed to alloc driver structure\n");
+		return -ENOMEM;
+	}
+
+	charger = &gpio_charger->charger;
+
+	charger->name = pdata->name ? pdata->name : "gpio-charger";
+	charger->type = pdata->type;
+	charger->properties = gpio_charger_properties;
+	charger->num_properties = ARRAY_SIZE(gpio_charger_properties);
+	charger->get_property = gpio_charger_get_property;
+	charger->supplied_to = pdata->supplied_to;
+	charger->num_supplicants = pdata->num_supplicants;
+
+	ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request gpio pin: %d\n", ret);
+		goto err_free;
+	}
+	ret = gpio_direction_input(pdata->gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to set gpio to input: %d\n", ret);
+		goto err_gpio_free;
+	}
+
+	gpio_charger->pdata = pdata;
+
+	ret = power_supply_register(&pdev->dev, charger);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register power supply: %d\n",
+			ret);
+		goto err_gpio_free;
+	}
+
+	irq = gpio_to_irq(pdata->gpio);
+	if (irq > 0) {
+		ret = request_any_context_irq(irq, gpio_charger_irq,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				dev_name(&pdev->dev), charger);
+		if (ret)
+			dev_warn(&pdev->dev, "Failed to request irq: %d\n", ret);
+		else
+			gpio_charger->irq = irq;
+	}
+
+	platform_set_drvdata(pdev, gpio_charger);
+
+	return 0;
+
+err_gpio_free:
+	gpio_free(pdata->gpio);
+err_free:
+	kfree(gpio_charger);
+	return ret;
+}
+
+static int __devexit gpio_charger_remove(struct platform_device *pdev)
+{
+	struct gpio_charger *gpio_charger = platform_get_drvdata(pdev);
+
+	if (gpio_charger->irq)
+		free_irq(gpio_charger->irq, &gpio_charger->charger);
+
+	power_supply_unregister(&gpio_charger->charger);
+
+	gpio_free(gpio_charger->pdata->gpio);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(gpio_charger);
+
+	return 0;
+}
+
+static struct platform_driver gpio_charger_driver = {
+	.probe = gpio_charger_probe,
+	.remove = __devexit_p(gpio_charger_remove),
+	.driver = {
+		.name = "gpio-charger",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init gpio_charger_init(void)
+{
+	return platform_driver_register(&gpio_charger_driver);
+}
+module_init(gpio_charger_init);
+
+static void __exit gpio_charger_exit(void)
+{
+	platform_driver_unregister(&gpio_charger_driver);
+}
+module_exit(gpio_charger_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Driver for chargers which report their online status through a GPIO");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-charger");

drivers/power/intel_mid_battery.c

@@ -765,7 +765,7 @@ static int __devexit platform_pmic_battery_remove(struct platform_device *pdev)
 	power_supply_unregister(&pbi->usb);
 	power_supply_unregister(&pbi->batt);
 
-	flush_scheduled_work();
+	cancel_work_sync(&pbi->handler);
 	kfree(pbi);
 	return 0;
 }

drivers/power/isp1704_charger.c

@@ -59,10 +59,60 @@ struct isp1704_charger {
 	struct notifier_block	nb;
 	struct work_struct	work;
 
-	char			model[7];
+	/* properties */
+	char			model[8];
 	unsigned		present:1;
+	unsigned		online:1;
+	unsigned		current_max;
+
+	/* temp storage variables */
+	unsigned long		event;
+	unsigned		max_power;
 };
 
+/*
+ * Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB
+ * chargers).
+ *
+ * REVISIT: The method is defined in Battery Charging Specification and is
+ * applicable to any ULPI transceiver. Nothing isp170x specific here.
+ */
+static inline int isp1704_charger_type(struct isp1704_charger *isp)
+{
+	u8 reg;
+	u8 func_ctrl;
+	u8 otg_ctrl;
+	int type = POWER_SUPPLY_TYPE_USB_DCP;
+
+	func_ctrl = otg_io_read(isp->otg, ULPI_FUNC_CTRL);
+	otg_ctrl = otg_io_read(isp->otg, ULPI_OTG_CTRL);
+
+	/* disable pulldowns */
+	reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN;
+	otg_io_write(isp->otg, ULPI_CLR(ULPI_OTG_CTRL), reg);
+
+	/* full speed */
+	otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
+			ULPI_FUNC_CTRL_XCVRSEL_MASK);
+	otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL),
+			ULPI_FUNC_CTRL_FULL_SPEED);
+
+	/* Enable strong pull-up on DP (1.5K) and reset */
+	reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
+	otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), reg);
+	usleep_range(1000, 2000);
+
+	reg = otg_io_read(isp->otg, ULPI_DEBUG);
+	if ((reg & 3) != 3)
+		type = POWER_SUPPLY_TYPE_USB_CDP;
+
+	/* recover original state */
+	otg_io_write(isp->otg, ULPI_FUNC_CTRL, func_ctrl);
+	otg_io_write(isp->otg, ULPI_OTG_CTRL, otg_ctrl);
+
+	return type;
+}
+
 /*
  * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger
  * is actually a dedicated charger, the following steps need to be taken.
@@ -127,16 +177,19 @@ static inline int isp1704_charger_verify(struct isp1704_charger *isp)
 static inline int isp1704_charger_detect(struct isp1704_charger *isp)
 {
 	unsigned long	timeout;
-	u8		r;
+	u8		pwr_ctrl;
 	int		ret = 0;
 
+	pwr_ctrl = otg_io_read(isp->otg, ISP1704_PWR_CTRL);
+
 	/* set SW control bit in PWR_CTRL register */
 	otg_io_write(isp->otg, ISP1704_PWR_CTRL,
 			ISP1704_PWR_CTRL_SWCTRL);
 
 	/* enable manual charger detection */
-	r = (ISP1704_PWR_CTRL_SWCTRL | ISP1704_PWR_CTRL_DPVSRC_EN);
-	otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL), r);
+	otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL),
+			ISP1704_PWR_CTRL_SWCTRL
+			| ISP1704_PWR_CTRL_DPVSRC_EN);
 	usleep_range(1000, 2000);
 
 	timeout = jiffies + msecs_to_jiffies(300);
@@ -147,7 +200,10 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp)
 			ret = isp1704_charger_verify(isp);
 			break;
 		}
-	} while (!time_after(jiffies, timeout));
+	} while (!time_after(jiffies, timeout) && isp->online);
+
+	/* recover original state */
+	otg_io_write(isp->otg, ISP1704_PWR_CTRL, pwr_ctrl);
 
 	return ret;
 }
@@ -155,52 +211,92 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp)
 static void isp1704_charger_work(struct work_struct *data)
 {
 	int			detect;
+	unsigned long		event;
+	unsigned		power;
 	struct isp1704_charger	*isp =
 		container_of(data, struct isp1704_charger, work);
+	static DEFINE_MUTEX(lock);
 
-	/*
-	 * FIXME Only supporting dedicated chargers even though isp1704 can
-	 * detect HUB and HOST chargers. If the device has already been
-	 * enumerated, the detection will break the connection.
-	 */
-	if (isp->otg->state != OTG_STATE_B_IDLE)
-		return;
+	event = isp->event;
+	power = isp->max_power;
 
-	/* disable data pullups */
-	if (isp->otg->gadget)
-		usb_gadget_disconnect(isp->otg->gadget);
+	mutex_lock(&lock);
+
+	switch (event) {
+	case USB_EVENT_VBUS:
+		isp->online = true;
+
+		/* detect charger */
+		detect = isp1704_charger_detect(isp);
+
+		if (detect) {
+			isp->present = detect;
+			isp->psy.type = isp1704_charger_type(isp);
+		}
 
-	/* detect charger */
-	detect = isp1704_charger_detect(isp);
-	if (detect) {
-		isp->present = detect;
-		power_supply_changed(&isp->psy);
+		switch (isp->psy.type) {
+		case POWER_SUPPLY_TYPE_USB_DCP:
+			isp->current_max = 1800;
+			break;
+		case POWER_SUPPLY_TYPE_USB_CDP:
+			/*
+			 * Only 500mA here or high speed chirp
+			 * handshaking may break
+			 */
+			isp->current_max = 500;
+			/* FALLTHROUGH */
+		case POWER_SUPPLY_TYPE_USB:
+		default:
+			/* enable data pullups */
+			if (isp->otg->gadget)
+				usb_gadget_connect(isp->otg->gadget);
+		}
+		break;
+	case USB_EVENT_NONE:
+		isp->online = false;
+		isp->current_max = 0;
+		isp->present = 0;
+		isp->current_max = 0;
+		isp->psy.type = POWER_SUPPLY_TYPE_USB;
+
+		/*
+		 * Disable data pullups. We need to prevent the controller from
+		 * enumerating.
+		 *
+		 * FIXME: This is here to allow charger detection with Host/HUB
+		 * chargers. The pullups may be enabled elsewhere, so this can
+		 * not be the final solution.
+		 */
+		if (isp->otg->gadget)
+			usb_gadget_disconnect(isp->otg->gadget);
+		break;
+	case USB_EVENT_ENUMERATED:
+		if (isp->present)
+			isp->current_max = 1800;
+		else
+			isp->current_max = power;
+		break;
+	default:
+		goto out;
 	}
 
-	/* enable data pullups */
-	if (isp->otg->gadget)
-		usb_gadget_connect(isp->otg->gadget);
+	power_supply_changed(&isp->psy);
+out:
+	mutex_unlock(&lock);
 }
 
 static int isp1704_notifier_call(struct notifier_block *nb,
-		unsigned long event, void *unused)
+		unsigned long event, void *power)
 {
 	struct isp1704_charger *isp =
 		container_of(nb, struct isp1704_charger, nb);
 
-	switch (event) {
-	case USB_EVENT_VBUS:
-		schedule_work(&isp->work);
-		break;
-	case USB_EVENT_NONE:
-		if (isp->present) {
-			isp->present = 0;
-			power_supply_changed(&isp->psy);
-		}
-		break;
-	default:
-		return NOTIFY_DONE;
-	}
+	isp->event = event;
+
+	if (power)
+		isp->max_power = *((unsigned *)power);
+
+	schedule_work(&isp->work);
 
 	return NOTIFY_OK;
 }
@@ -216,6 +312,12 @@ static int isp1704_charger_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = isp->present;
 		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = isp->online;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		val->intval = isp->current_max;
+		break;
 	case POWER_SUPPLY_PROP_MODEL_NAME:
 		val->strval = isp->model;
 		break;
@@ -230,6 +332,8 @@ static int isp1704_charger_get_property(struct power_supply *psy,
 
 static enum power_supply_property power_props[] = {
 	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
 	POWER_SUPPLY_PROP_MODEL_NAME,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
@@ -287,13 +391,13 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
 	if (!isp->otg)
 		goto fail0;
 
+	isp->dev = &pdev->dev;
+	platform_set_drvdata(pdev, isp);
+
 	ret = isp1704_test_ulpi(isp);
 	if (ret < 0)
 		goto fail1;
 
-	isp->dev = &pdev->dev;
-	platform_set_drvdata(pdev, isp);
-
 	isp->psy.name		= "isp1704";
 	isp->psy.type		= POWER_SUPPLY_TYPE_USB;
 	isp->psy.properties	= power_props;
@@ -318,6 +422,23 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
 
 	dev_info(isp->dev, "registered with product id %s\n", isp->model);
 
+	/*
+	 * Taking over the D+ pullup.
+	 *
+	 * FIXME: The device will be disconnected if it was already
+	 * enumerated. The charger driver should be always loaded before any
+	 * gadget is loaded.
+	 */
+	if (isp->otg->gadget)
+		usb_gadget_disconnect(isp->otg->gadget);
+
+	/* Detect charger if VBUS is valid (the cable was already plugged). */
+	ret = otg_io_read(isp->otg, ULPI_USB_INT_STS);
+	if ((ret & ULPI_INT_VBUS_VALID) && !isp->otg->default_a) {
+		isp->event = USB_EVENT_VBUS;
+		schedule_work(&isp->work);
+	}
+
 	return 0;
 fail2:
 	power_supply_unregister(&isp->psy);

drivers/power/jz4740-battery.c

@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
 #include <linux/delay.h>
 #include <linux/gpio.h>
@@ -47,6 +48,8 @@ struct jz_battery {
 
 	struct power_supply battery;
 	struct delayed_work work;
+
+	struct mutex lock;
 };
 
 static inline struct jz_battery *psy_to_jz_battery(struct power_supply *psy)
@@ -68,6 +71,8 @@ static long jz_battery_read_voltage(struct jz_battery *battery)
 	unsigned long val;
 	long voltage;
 
+	mutex_lock(&battery->lock);
+
 	INIT_COMPLETION(battery->read_completion);
 
 	enable_irq(battery->irq);
@@ -91,6 +96,8 @@ static long jz_battery_read_voltage(struct jz_battery *battery)
 	battery->cell->disable(battery->pdev);
 	disable_irq(battery->irq);
 
+	mutex_unlock(&battery->lock);
+
 	return voltage;
 }
 
@@ -240,6 +247,11 @@ static int __devinit jz_battery_probe(struct platform_device *pdev)
 	struct jz_battery *jz_battery;
 	struct power_supply *battery;
 
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform_data supplied\n");
+		return -ENXIO;
+	}
+
 	jz_battery = kzalloc(sizeof(*jz_battery), GFP_KERNEL);
 	if (!jz_battery) {
 		dev_err(&pdev->dev, "Failed to allocate driver structure\n");
@@ -291,6 +303,7 @@ static int __devinit jz_battery_probe(struct platform_device *pdev)
 	jz_battery->pdev = pdev;
 
 	init_completion(&jz_battery->read_completion);
+	mutex_init(&jz_battery->lock);
 
 	INIT_DELAYED_WORK(&jz_battery->work, jz_battery_work);
 

drivers/power/max17042_battery.c

+/*
+ * Fuel gauge driver for Maxim 17042 / 8966 / 8997
+ *  Note that Maxim 8966 and 8997 are mfd and this is its subdevice.
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * This driver is based on max17040_battery.c
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/power/max17042_battery.h>
+
+enum max17042_register {
+	MAX17042_STATUS		= 0x00,
+	MAX17042_VALRT_Th	= 0x01,
+	MAX17042_TALRT_Th	= 0x02,
+	MAX17042_SALRT_Th	= 0x03,
+	MAX17042_AtRate		= 0x04,
+	MAX17042_RepCap		= 0x05,
+	MAX17042_RepSOC		= 0x06,
+	MAX17042_Age		= 0x07,
+	MAX17042_TEMP		= 0x08,
+	MAX17042_VCELL		= 0x09,
+	MAX17042_Current	= 0x0A,
+	MAX17042_AvgCurrent	= 0x0B,
+	MAX17042_Qresidual	= 0x0C,
+	MAX17042_SOC		= 0x0D,
+	MAX17042_AvSOC		= 0x0E,
+	MAX17042_RemCap		= 0x0F,
+	MAX17402_FullCAP	= 0x10,
+	MAX17042_TTE		= 0x11,
+	MAX17042_V_empty	= 0x12,
+
+	MAX17042_RSLOW		= 0x14,
+
+	MAX17042_AvgTA		= 0x16,
+	MAX17042_Cycles		= 0x17,
+	MAX17042_DesignCap	= 0x18,
+	MAX17042_AvgVCELL	= 0x19,
+	MAX17042_MinMaxTemp	= 0x1A,
+	MAX17042_MinMaxVolt	= 0x1B,
+	MAX17042_MinMaxCurr	= 0x1C,
+	MAX17042_CONFIG		= 0x1D,
+	MAX17042_ICHGTerm	= 0x1E,
+	MAX17042_AvCap		= 0x1F,
+	MAX17042_ManName	= 0x20,
+	MAX17042_DevName	= 0x21,
+	MAX17042_DevChem	= 0x22,
+
+	MAX17042_TempNom	= 0x24,
+	MAX17042_TempCold	= 0x25,
+	MAX17042_TempHot	= 0x26,
+	MAX17042_AIN		= 0x27,
+	MAX17042_LearnCFG	= 0x28,
+	MAX17042_SHFTCFG	= 0x29,
+	MAX17042_RelaxCFG	= 0x2A,
+	MAX17042_MiscCFG	= 0x2B,
+	MAX17042_TGAIN		= 0x2C,
+	MAx17042_TOFF		= 0x2D,
+	MAX17042_CGAIN		= 0x2E,
+	MAX17042_COFF		= 0x2F,
+
+	MAX17042_Q_empty	= 0x33,
+	MAX17042_T_empty	= 0x34,
+
+	MAX17042_RCOMP0		= 0x38,
+	MAX17042_TempCo		= 0x39,
+	MAX17042_Rx		= 0x3A,
+	MAX17042_T_empty0	= 0x3B,
+	MAX17042_TaskPeriod	= 0x3C,
+	MAX17042_FSTAT		= 0x3D,
+
+	MAX17042_SHDNTIMER	= 0x3F,
+
+	MAX17042_VFRemCap	= 0x4A,
+
+	MAX17042_QH		= 0x4D,
+	MAX17042_QL		= 0x4E,
+};
+
+struct max17042_chip {
+	struct i2c_client *client;
+	struct power_supply battery;
+	struct max17042_platform_data *pdata;
+};
+
+static int max17042_write_reg(struct i2c_client *client, u8 reg, u16 value)
+{
+	int ret = i2c_smbus_write_word_data(client, reg, value);
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+	return ret;
+}
+
+static int max17042_read_reg(struct i2c_client *client, u8 reg)
+{
+	int ret = i2c_smbus_read_word_data(client, reg);
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+	return ret;
+}
+
+static enum power_supply_property max17042_battery_props[] = {
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static int max17042_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct max17042_chip *chip = container_of(psy,
+				struct max17042_chip, battery);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = max17042_read_reg(chip->client,
+				MAX17042_VCELL) * 83; /* 1000 / 12 = 83 */
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		val->intval = max17042_read_reg(chip->client,
+				MAX17042_AvgVCELL) * 83;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = max17042_read_reg(chip->client,
+				MAX17042_SOC) / 256;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int __devinit max17042_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct max17042_chip *chip;
+	int ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -EIO;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->client = client;
+	chip->pdata = client->dev.platform_data;
+
+	i2c_set_clientdata(client, chip);
+
+	chip->battery.name		= "max17042_battery";
+	chip->battery.type		= POWER_SUPPLY_TYPE_BATTERY;
+	chip->battery.get_property	= max17042_get_property;
+	chip->battery.properties	= max17042_battery_props;
+	chip->battery.num_properties	= ARRAY_SIZE(max17042_battery_props);
+
+	ret = power_supply_register(&client->dev, &chip->battery);
+	if (ret) {
+		dev_err(&client->dev, "failed: power supply register\n");
+		i2c_set_clientdata(client, NULL);
+		kfree(chip);
+		return ret;
+	}
+
+	if (!chip->pdata->enable_current_sense) {
+		max17042_write_reg(client, MAX17042_CGAIN, 0x0000);
+		max17042_write_reg(client, MAX17042_MiscCFG, 0x0003);
+		max17042_write_reg(client, MAX17042_LearnCFG, 0x0007);
+	}
+
+	return 0;
+}
+
+static int __devexit max17042_remove(struct i2c_client *client)
+{
+	struct max17042_chip *chip = i2c_get_clientdata(client);
+
+	power_supply_unregister(&chip->battery);
+	i2c_set_clientdata(client, NULL);
+	kfree(chip);
+	return 0;
+}
+
+static const struct i2c_device_id max17042_id[] = {
+	{ "max17042", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max17042_id);
+
+static struct i2c_driver max17042_i2c_driver = {
+	.driver	= {
+		.name	= "max17042",
+	},
+	.probe		= max17042_probe,
+	.remove		= __devexit_p(max17042_remove),
+	.id_table	= max17042_id,
+};
+
+static int __init max17042_init(void)
+{
+	return i2c_add_driver(&max17042_i2c_driver);
+}
+module_init(max17042_init);
+
+static void __exit max17042_exit(void)
+{
+	i2c_del_driver(&max17042_i2c_driver);
+}
+module_exit(max17042_exit);
+
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("MAX17042 Fuel Gauge");
+MODULE_LICENSE("GPL");

drivers/power/olpc_battery.c

@@ -201,6 +201,72 @@ static int olpc_bat_get_tech(union power_supply_propval *val)
 	return ret;
 }
 
+static int olpc_bat_get_charge_full_design(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	union power_supply_propval tech;
+	int ret, mfr;
+
+	ret = olpc_bat_get_tech(&tech);
+	if (ret)
+		return ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	mfr = ec_byte >> 4;
+
+	switch (tech.intval) {
+	case POWER_SUPPLY_TECHNOLOGY_NiMH:
+		switch (mfr) {
+		case 1: /* Gold Peak */
+			val->intval = 3000000*.8;
+			break;
+		default:
+			return -EIO;
+		}
+		break;
+
+	case POWER_SUPPLY_TECHNOLOGY_LiFe:
+		switch (mfr) {
+		case 1: /* Gold Peak */
+			val->intval = 2800000;
+			break;
+		case 2: /* BYD */
+			val->intval = 3100000;
+			break;
+		default:
+			return -EIO;
+		}
+		break;
+
+	default:
+		return -EIO;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_charge_now(union power_supply_propval *val)
+{
+	uint8_t soc;
+	union power_supply_propval full;
+	int ret;
+
+	ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &soc, 1);
+	if (ret)
+		return ret;
+
+	ret = olpc_bat_get_charge_full_design(&full);
+	if (ret)
+		return ret;
+
+	val->intval = soc * (full.intval / 100);
+	return 0;
+}
+
 /*********************************************************************
  *		Battery properties
  *********************************************************************/
@@ -267,6 +333,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 			return ret;
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 		ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
 		if (ret)
 			return ret;
@@ -274,6 +341,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		val->intval = (s16)be16_to_cpu(ec_word) * 9760L / 32;
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
 		ret = olpc_ec_cmd(EC_BAT_CURRENT, NULL, 0, (void *)&ec_word, 2);
 		if (ret)
 			return ret;
@@ -294,6 +362,16 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		else
 			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		ret = olpc_bat_get_charge_full_design(val);
+		if (ret)
+			return ret;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		ret = olpc_bat_get_charge_now(val);
+		if (ret)
+			return ret;
+		break;
 	case POWER_SUPPLY_PROP_TEMP:
 		ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2);
 		if (ret)
@@ -331,16 +409,20 @@ static int olpc_bat_get_property(struct power_supply *psy,
 	return ret;
 }
 
-static enum power_supply_property olpc_bat_props[] = {
+static enum power_supply_property olpc_xo1_bat_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_CHARGE_TYPE,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TEMP_AMBIENT,
 	POWER_SUPPLY_PROP_MANUFACTURER,
@@ -348,6 +430,27 @@ static enum power_supply_property olpc_bat_props[] = {
 	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 };
 
+/* XO-1.5 does not have ambient temperature property */
+static enum power_supply_property olpc_xo15_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+};
+
 /* EEPROM reading goes completely around the power_supply API, sadly */
 
 #define EEPROM_START	0x20
@@ -419,8 +522,6 @@ static struct device_attribute olpc_bat_error = {
 static struct platform_device *bat_pdev;
 
 static struct power_supply olpc_bat = {
-	.properties = olpc_bat_props,
-	.num_properties = ARRAY_SIZE(olpc_bat_props),
 	.get_property = olpc_bat_get_property,
 	.use_for_apm = 1,
 };
@@ -466,6 +567,13 @@ static int __init olpc_bat_init(void)
 		goto ac_failed;
 
 	olpc_bat.name = bat_pdev->name;
+	if (olpc_board_at_least(olpc_board_pre(0xd0))) { /* XO-1.5 */
+		olpc_bat.properties = olpc_xo15_bat_props;
+		olpc_bat.num_properties = ARRAY_SIZE(olpc_xo15_bat_props);
+	} else { /* XO-1 */
+		olpc_bat.properties = olpc_xo1_bat_props;
+		olpc_bat.num_properties = ARRAY_SIZE(olpc_xo1_bat_props);
+	}
 
 	ret = power_supply_register(&bat_pdev->dev, &olpc_bat);
 	if (ret)

drivers/power/power_supply_core.c

@@ -190,10 +190,10 @@ int power_supply_register(struct device *parent, struct power_supply *psy)
 	goto success;
 
 create_triggers_failed:
-	device_unregister(psy->dev);
+	device_del(dev);
 kobject_set_name_failed:
 device_add_failed:
-	kfree(dev);
+	put_device(dev);
 success:
 	return rc;
 }
@@ -201,7 +201,7 @@ EXPORT_SYMBOL_GPL(power_supply_register);
 
 void power_supply_unregister(struct power_supply *psy)
 {
-	flush_scheduled_work();
+	cancel_work_sync(&psy->changed_work);
 	power_supply_remove_triggers(psy);
 	device_unregister(psy->dev);
 }

drivers/power/s3c_adc_battery.c

@@ -112,6 +112,13 @@ static int calc_full_volt(int volt_val, int cur_val, int impedance)
 	return volt_val + cur_val * impedance / 1000;
 }
 
+static int charge_finished(struct s3c_adc_bat *bat)
+{
+	return bat->pdata->gpio_inverted ?
+		!gpio_get_value(bat->pdata->gpio_charge_finished) :
+		gpio_get_value(bat->pdata->gpio_charge_finished);
+}
+
 static int s3c_adc_bat_get_property(struct power_supply *psy,
 				    enum power_supply_property psp,
 				    union power_supply_propval *val)
@@ -140,7 +147,7 @@ static int s3c_adc_bat_get_property(struct power_supply *psy,
 
 	if (bat->cable_plugged &&
 		((bat->pdata->gpio_charge_finished < 0) ||
-		!gpio_get_value(bat->pdata->gpio_charge_finished))) {
+		!charge_finished(bat))) {
 		lut = bat->pdata->lut_acin;
 		lut_size = bat->pdata->lut_acin_cnt;
 	}
@@ -236,8 +243,7 @@ static void s3c_adc_bat_work(struct work_struct *work)
 		}
 	} else {
 		if ((bat->pdata->gpio_charge_finished >= 0) && is_plugged) {
-			is_charged = gpio_get_value(
-				main_bat.pdata->gpio_charge_finished);
+			is_charged = charge_finished(&main_bat);
 			if (is_charged) {
 				if (bat->pdata->disable_charger)
 					bat->pdata->disable_charger();

drivers/power/tosa_battery.c

@@ -332,7 +332,7 @@ static struct {
 static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
 {
 	/* flush all pending status updates */
-	flush_scheduled_work();
+	flush_work_sync(&bat_work);
 	return 0;
 }
 
@@ -422,7 +422,7 @@ static int __devinit tosa_bat_probe(struct platform_device *dev)
 err_psy_reg_main:
 
 	/* see comment in tosa_bat_remove */
-	flush_scheduled_work();
+	cancel_work_sync(&bat_work);
 
 	i--;
 err_gpio:
@@ -445,12 +445,11 @@ static int __devexit tosa_bat_remove(struct platform_device *dev)
 	power_supply_unregister(&tosa_bat_main.psy);
 
 	/*
-	 * now flush all pending work.
-	 * we won't get any more schedules, since all
-	 * sources (isr and external_power_changed)
-	 * are unregistered now.
+	 * Now cancel the bat_work.  We won't get any more schedules,
+	 * since all sources (isr and external_power_changed) are
+	 * unregistered now.
 	 */
-	flush_scheduled_work();
+	cancel_work_sync(&bat_work);
 
 	for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
 		gpio_free(gpios[i].gpio);

drivers/power/wm97xx_battery.c

@@ -147,7 +147,7 @@ static irqreturn_t wm97xx_chrg_irq(int irq, void *data)
 #ifdef CONFIG_PM
 static int wm97xx_bat_suspend(struct device *dev)
 {
-	flush_scheduled_work();
+	flush_work_sync(&bat_work);
 	return 0;
 }
 
@@ -273,7 +273,7 @@ static int __devexit wm97xx_bat_remove(struct platform_device *dev)
 		free_irq(gpio_to_irq(pdata->charge_gpio), dev);
 		gpio_free(pdata->charge_gpio);
 	}
-	flush_scheduled_work();
+	cancel_work_sync(&bat_work);
 	power_supply_unregister(&bat_ps);
 	kfree(prop);
 	return 0;

drivers/power/z2_battery.c

@@ -254,7 +254,7 @@ static int __devexit z2_batt_remove(struct i2c_client *client)
 	struct z2_charger *charger = i2c_get_clientdata(client);
 	struct z2_battery_info *info = charger->info;
 
-	flush_scheduled_work();
+	cancel_work_sync(&charger->bat_work);
 	power_supply_unregister(&charger->batt_ps);
 
 	kfree(charger->batt_ps.properties);
@@ -271,7 +271,9 @@ static int __devexit z2_batt_remove(struct i2c_client *client)
 #ifdef CONFIG_PM
 static int z2_batt_suspend(struct i2c_client *client, pm_message_t state)
 {
-	flush_scheduled_work();
+	struct z2_charger *charger = i2c_get_clientdata(client);
+
+	flush_work_sync(&charger->bat_work);
 	return 0;
 }
 

include/linux/power/gpio-charger.h

+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_POWER_GPIO_CHARGER_H__
+#define __LINUX_POWER_GPIO_CHARGER_H__
+
+#include <linux/power_supply.h>
+#include <linux/types.h>
+
+/**
+ * struct gpio_charger_platform_data - platform_data for gpio_charger devices
+ * @name:		Name for the chargers power_supply device
+ * @type:		Type of the charger
+ * @gpio:		GPIO which is used to indicate the chargers status
+ * @gpio_active_low:	Should be set to 1 if the GPIO is active low otherwise 0
+ * @supplied_to:	Array of battery names to which this chargers supplies power
+ * @num_supplicants:	Number of entries in the supplied_to array
+ */
+struct gpio_charger_platform_data {
+	const char *name;
+	enum power_supply_type type;
+
+	int gpio;
+	int gpio_active_low;
+
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+#endif

include/linux/power/max17042_battery.h

+/*
+ * Fuel gauge driver for Maxim 17042 / 8966 / 8997
+ *  Note that Maxim 8966 and 8997 are mfd and this is its subdevice.
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __MAX17042_BATTERY_H_
+#define __MAX17042_BATTERY_H_
+
+struct max17042_platform_data {
+	bool enable_current_sense;
+};
+
+#endif /* __MAX17042_BATTERY_H_ */

include/linux/s3c_adc_battery.h

@@ -14,6 +14,7 @@ struct s3c_adc_bat_pdata {
 	void (*disable_charger)(void);
 
 	int gpio_charge_finished;
+	int gpio_inverted;
 
 	const struct s3c_adc_bat_thresh *lut_noac;
 	unsigned int lut_noac_cnt;