Merge tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core changes for 5.7-rc1.

  Nothing huge in here, just lots of little firmware core changes and
  use of new apis, a libfs fix, a debugfs api change, and some driver
  core deferred probe rework.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits)
  Revert "driver core: Set fw_devlink to "permissive" behavior by default"
  driver core: Set fw_devlink to "permissive" behavior by default
  driver core: Replace open-coded list_last_entry()
  driver core: Read atomic counter once in driver_probe_done()
  libfs: fix infoleak in simple_attr_read()
  driver core: Add device links from fwnode only for the primary device
  platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
  platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
  Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
  Input: silead - Switch to firmware_request_platform for retreiving the fw
  selftests: firmware: Add firmware_request_platform tests
  test_firmware: add support for firmware_request_platform
  firmware: Add new platform fallback mechanism and firmware_request_platform()
  Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"
  drivers: base: power: wakeup.c: Use built-in RCU list checking
  component: allow missing unbind callback
  debugfs: remove return value of debugfs_create_file_size()
  debugfs: Check module state before warning in {full/open}_proxy_open()
  firmware: fix a double abort case with fw_load_sysfs_fallback
  arch_topology: Fix putting invalid cpu clk
  ...

Documentation/admin-guide/kernel-parameters.txt

@@ -1360,6 +1360,24 @@
 			can be changed at run time by the max_graph_depth file
 			in the tracefs tracing directory. default: 0 (no limit)
 
+	fw_devlink=	[KNL] Create device links between consumer and supplier
+			devices by scanning the firmware to infer the
+			consumer/supplier relationships. This feature is
+			especially useful when drivers are loaded as modules as
+			it ensures proper ordering of tasks like device probing
+			(suppliers first, then consumers), supplier boot state
+			clean up (only after all consumers have probed),
+			suspend/resume & runtime PM (consumers first, then
+			suppliers).
+			Format: { off | permissive | on | rpm }
+			off --	Don't create device links from firmware info.
+			permissive -- Create device links from firmware info
+				but use it only for ordering boot state clean
+				up (sync_state() calls).
+			on -- 	Create device links from firmware info and use it
+				to enforce probe and suspend/resume ordering.
+			rpm --	Like "on", but also use to order runtime PM.
+
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
 			support via parallel port (up to 5 devices per port)
@@ -3291,12 +3309,6 @@
 			This can be set from sysctl after boot.
 			See Documentation/admin-guide/sysctl/vm.rst for details.
 
-	of_devlink	[OF, KNL] Create device links between consumer and
-			supplier devices by scanning the devictree to infer the
-			consumer/supplier relationships.  A consumer device
-			will not be probed until all the supplier devices have
-			probed successfully.
-
 	ohci1394_dma=early	[HW] enable debugging via the ohci1394 driver.
 			See Documentation/debugging-via-ohci1394.txt for more
 			info.

Documentation/driver-api/firmware/fallback-mechanisms.rst

@@ -202,3 +202,106 @@ the following file:
 
 If you echo 0 into it means MAX_JIFFY_OFFSET will be used. The data type
 for the timeout is an int.
+
+EFI embedded firmware fallback mechanism
+========================================
+
+On some devices the system's EFI code / ROM may contain an embedded copy
+of firmware for some of the system's integrated peripheral devices and
+the peripheral's Linux device-driver needs to access this firmware.
+
+Device drivers which need such firmware can use the
+firmware_request_platform() function for this, note that this is a
+separate fallback mechanism from the other fallback mechanisms and
+this does not use the sysfs interface.
+
+A device driver which needs this can describe the firmware it needs
+using an efi_embedded_fw_desc struct:
+
+.. kernel-doc:: include/linux/efi_embedded_fw.h
+   :functions: efi_embedded_fw_desc
+
+The EFI embedded-fw code works by scanning all EFI_BOOT_SERVICES_CODE memory
+segments for an eight byte sequence matching prefix; if the prefix is found it
+then does a sha256 over length bytes and if that matches makes a copy of length
+bytes and adds that to its list with found firmwares.
+
+To avoid doing this somewhat expensive scan on all systems, dmi matching is
+used. Drivers are expected to export a dmi_system_id array, with each entries'
+driver_data pointing to an efi_embedded_fw_desc.
+
+To register this array with the efi-embedded-fw code, a driver needs to:
+
+1. Always be builtin to the kernel or store the dmi_system_id array in a
+   separate object file which always gets builtin.
+
+2. Add an extern declaration for the dmi_system_id array to
+   include/linux/efi_embedded_fw.h.
+
+3. Add the dmi_system_id array to the embedded_fw_table in
+   drivers/firmware/efi/embedded-firmware.c wrapped in a #ifdef testing that
+   the driver is being builtin.
+
+4. Add "select EFI_EMBEDDED_FIRMWARE if EFI_STUB" to its Kconfig entry.
+
+The firmware_request_platform() function will always first try to load firmware
+with the specified name directly from the disk, so the EFI embedded-fw can
+always be overridden by placing a file under /lib/firmware.
+
+Note that:
+
+1. The code scanning for EFI embedded-firmware runs near the end
+   of start_kernel(), just before calling rest_init(). For normal drivers and
+   subsystems using subsys_initcall() to register themselves this does not
+   matter. This means that code running earlier cannot use EFI
+   embedded-firmware.
+
+2. At the moment the EFI embedded-fw code assumes that firmwares always start at
+   an offset which is a multiple of 8 bytes, if this is not true for your case
+   send in a patch to fix this.
+
+3. At the moment the EFI embedded-fw code only works on x86 because other archs
+   free EFI_BOOT_SERVICES_CODE before the EFI embedded-fw code gets a chance to
+   scan it.
+
+4. The current brute-force scanning of EFI_BOOT_SERVICES_CODE is an ad-hoc
+   brute-force solution. There has been discussion to use the UEFI Platform
+   Initialization (PI) spec's Firmware Volume protocol. This has been rejected
+   because the FV Protocol relies on *internal* interfaces of the PI spec, and:
+   1. The PI spec does not define peripheral firmware at all
+   2. The internal interfaces of the PI spec do not guarantee any backward
+   compatibility. Any implementation details in FV may be subject to change,
+   and may vary system to system. Supporting the FV Protocol would be
+   difficult as it is purposely ambiguous.
+
+Example how to check for and extract embedded firmware
+------------------------------------------------------
+
+To check for, for example Silead touchscreen controller embedded firmware,
+do the following:
+
+1. Boot the system with efi=debug on the kernel commandline
+
+2. cp /sys/kernel/debug/efi/boot_services_code? to your home dir
+
+3. Open the boot_services_code? files in a hex-editor, search for the
+   magic prefix for Silead firmware: F0 00 00 00 02 00 00 00, this gives you
+   the beginning address of the firmware inside the boot_services_code? file.
+
+4. The firmware has a specific pattern, it starts with a 8 byte page-address,
+   typically F0 00 00 00 02 00 00 00 for the first page followed by 32-bit
+   word-address + 32-bit value pairs. With the word-address incrementing 4
+   bytes (1 word) for each pair until a page is complete. A complete page is
+   followed by a new page-address, followed by more word + value pairs. This
+   leads to a very distinct pattern. Scroll down until this pattern stops,
+   this gives you the end of the firmware inside the boot_services_code? file.
+
+5. "dd if=boot_services_code? of=firmware bs=1 skip=<begin-addr> count=<len>"
+   will extract the firmware for you. Inspect the firmware file in a
+   hexeditor to make sure you got the dd parameters correct.
+
+6. Copy it to /lib/firmware under the expected name to test it.
+
+7. If the extracted firmware works, you can use the found info to fill an
+   efi_embedded_fw_desc struct to describe it, run "sha256sum firmware"
+   to get the sha256sum to put in the sha256 field.

Documentation/driver-api/firmware/lookup-order.rst

@@ -12,6 +12,8 @@ a driver issues a firmware API call.
   return it immediately
 * The ''Direct filesystem lookup'' is performed next, if found we
   return it immediately
+* The ''Platform firmware fallback'' is performed next, but only when
+  firmware_request_platform() is used, if found we return it immediately
 * If no firmware has been found and the fallback mechanism was enabled
   the sysfs interface is created. After this either a kobject uevent
   is issued or the custom firmware loading is relied upon for firmware

Documentation/driver-api/firmware/request_firmware.rst

@@ -25,6 +25,11 @@ firmware_request_nowarn
 .. kernel-doc:: drivers/base/firmware_loader/main.c
    :functions: firmware_request_nowarn
 
+firmware_request_platform
+-------------------------
+.. kernel-doc:: drivers/base/firmware_loader/main.c
+   :functions: firmware_request_platform
+
 request_firmware_direct
 -----------------------
 .. kernel-doc:: drivers/base/firmware_loader/main.c

Documentation/filesystems/debugfs.rst

@@ -62,10 +62,10 @@ missing.
 Create a file with an initial size, the following function can be used
 instead::
 
-    struct dentry *debugfs_create_file_size(const char *name, umode_t mode,
-				struct dentry *parent, void *data,
-				const struct file_operations *fops,
-				loff_t file_size);
+    void debugfs_create_file_size(const char *name, umode_t mode,
+				  struct dentry *parent, void *data,
+				  const struct file_operations *fops,
+				  loff_t file_size);
 
 file_size is the initial file size. The other parameters are the same
 as the function debugfs_create_file.

arch/x86/platform/efi/efi.c

@@ -243,6 +243,7 @@ int __init efi_memblock_x86_reserve_range(void)
 	     efi.memmap.desc_version);
 
 	memblock_reserve(pmap, efi.memmap.nr_map * efi.memmap.desc_size);
+	set_bit(EFI_PRESERVE_BS_REGIONS, &efi.flags);
 
 	return 0;
 }
@@ -943,6 +944,7 @@ static void __init __efi_enter_virtual_mode(void)
 		goto err;
 	}
 
+	efi_check_for_embedded_firmwares();
 	efi_free_boot_services();
 
 	/*

arch/x86/platform/efi/quirks.c

@@ -410,6 +410,10 @@ void __init efi_free_boot_services(void)
 	int num_entries = 0;
 	void *new, *new_md;
 
+	/* Keep all regions for /sys/kernel/debug/efi */
+	if (efi_enabled(EFI_DBG))
+		return;
+
 	for_each_efi_memory_desc(md) {
 		unsigned long long start = md->phys_addr;
 		unsigned long long size = md->num_pages << EFI_PAGE_SHIFT;

drivers/base/arch_topology.c

@@ -94,7 +94,7 @@ static void update_topology_flags_workfn(struct work_struct *work)
 	update_topology = 0;
 }
 
-static u32 capacity_scale;
+static DEFINE_PER_CPU(u32, freq_factor) = 1;
 static u32 *raw_capacity;
 
 static int free_raw_capacity(void)
@@ -108,17 +108,23 @@ static int free_raw_capacity(void)
 void topology_normalize_cpu_scale(void)
 {
 	u64 capacity;
+	u64 capacity_scale;
 	int cpu;
 
 	if (!raw_capacity)
 		return;
 
-	pr_debug("cpu_capacity: capacity_scale=%u\n", capacity_scale);
+	capacity_scale = 1;
 	for_each_possible_cpu(cpu) {
-		pr_debug("cpu_capacity: cpu=%d raw_capacity=%u\n",
-			 cpu, raw_capacity[cpu]);
-		capacity = (raw_capacity[cpu] << SCHED_CAPACITY_SHIFT)
-			/ capacity_scale;
+		capacity = raw_capacity[cpu] * per_cpu(freq_factor, cpu);
+		capacity_scale = max(capacity, capacity_scale);
+	}
+
+	pr_debug("cpu_capacity: capacity_scale=%llu\n", capacity_scale);
+	for_each_possible_cpu(cpu) {
+		capacity = raw_capacity[cpu] * per_cpu(freq_factor, cpu);
+		capacity = div64_u64(capacity << SCHED_CAPACITY_SHIFT,
+			capacity_scale);
 		topology_set_cpu_scale(cpu, capacity);
 		pr_debug("cpu_capacity: CPU%d cpu_capacity=%lu\n",
 			cpu, topology_get_cpu_scale(cpu));
@@ -127,6 +133,7 @@ void topology_normalize_cpu_scale(void)
 
 bool __init topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu)
 {
+	struct clk *cpu_clk;
 	static bool cap_parsing_failed;
 	int ret;
 	u32 cpu_capacity;
@@ -146,10 +153,22 @@ bool __init topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu)
 				return false;
 			}
 		}
-		capacity_scale = max(cpu_capacity, capacity_scale);
 		raw_capacity[cpu] = cpu_capacity;
 		pr_debug("cpu_capacity: %pOF cpu_capacity=%u (raw)\n",
 			cpu_node, raw_capacity[cpu]);
+
+		/*
+		 * Update freq_factor for calculating early boot cpu capacities.
+		 * For non-clk CPU DVFS mechanism, there's no way to get the
+		 * frequency value now, assuming they are running at the same
+		 * frequency (by keeping the initial freq_factor value).
+		 */
+		cpu_clk = of_clk_get(cpu_node, 0);
+		if (!PTR_ERR_OR_ZERO(cpu_clk)) {
+			per_cpu(freq_factor, cpu) =
+				clk_get_rate(cpu_clk) / 1000;
+			clk_put(cpu_clk);
+		}
 	} else {
 		if (raw_capacity) {
 			pr_err("cpu_capacity: missing %pOF raw capacity\n",
@@ -188,11 +207,8 @@ init_cpu_capacity_callback(struct notifier_block *nb,
 
 	cpumask_andnot(cpus_to_visit, cpus_to_visit, policy->related_cpus);
 
-	for_each_cpu(cpu, policy->related_cpus) {
-		raw_capacity[cpu] = topology_get_cpu_scale(cpu) *
-				    policy->cpuinfo.max_freq / 1000UL;
-		capacity_scale = max(raw_capacity[cpu], capacity_scale);
-	}
+	for_each_cpu(cpu, policy->related_cpus)
+		per_cpu(freq_factor, cpu) = policy->cpuinfo.max_freq / 1000;
 
 	if (cpumask_empty(cpus_to_visit)) {
 		topology_normalize_cpu_scale();
@@ -281,7 +297,7 @@ static int __init get_cpu_for_node(struct device_node *node)
 static int __init parse_core(struct device_node *core, int package_id,
 			     int core_id)
 {
-	char name[10];
+	char name[20];
 	bool leaf = true;
 	int i = 0;
 	int cpu;
@@ -327,7 +343,7 @@ static int __init parse_core(struct device_node *core, int package_id,
 
 static int __init parse_cluster(struct device_node *cluster, int depth)
 {
-	char name[10];
+	char name[20];
 	bool leaf = true;
 	bool has_cores = false;
 	struct device_node *c;

drivers/base/component.c

@@ -528,7 +528,8 @@ static void component_unbind(struct component *component,
 {
 	WARN_ON(!component->bound);
 
-	component->ops->unbind(component->dev, master->dev, data);
+	if (component->ops && component->ops->unbind)
+		component->ops->unbind(component->dev, master->dev, data);
 	component->bound = false;
 
 	/* Release all resources claimed in the binding of this component */

drivers/base/core.c

@@ -64,12 +64,12 @@ static inline void device_links_write_unlock(void)
 	mutex_unlock(&device_links_lock);
 }
 
-int device_links_read_lock(void)
+int device_links_read_lock(void) __acquires(&device_links_srcu)
 {
 	return srcu_read_lock(&device_links_srcu);
 }
 
-void device_links_read_unlock(int idx)
+void device_links_read_unlock(int idx) __releases(&device_links_srcu)
 {
 	srcu_read_unlock(&device_links_srcu, idx);
 }
@@ -523,9 +523,13 @@ static void device_link_add_missing_supplier_links(void)
 
 	mutex_lock(&wfs_lock);
 	list_for_each_entry_safe(dev, tmp, &wait_for_suppliers,
-				 links.needs_suppliers)
-		if (!fwnode_call_int_op(dev->fwnode, add_links, dev))
+				 links.needs_suppliers) {
+		int ret = fwnode_call_int_op(dev->fwnode, add_links, dev);
+		if (!ret)
 			list_del_init(&dev->links.needs_suppliers);
+		else if (ret != -ENODEV)
+			dev->links.need_for_probe = false;
+	}
 	mutex_unlock(&wfs_lock);
 }
 
@@ -2341,6 +2345,31 @@ static int device_private_init(struct device *dev)
 	return 0;
 }
 
+static u32 fw_devlink_flags;
+static int __init fw_devlink_setup(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp(arg, "off") == 0) {
+		fw_devlink_flags = 0;
+	} else if (strcmp(arg, "permissive") == 0) {
+		fw_devlink_flags = DL_FLAG_SYNC_STATE_ONLY;
+	} else if (strcmp(arg, "on") == 0) {
+		fw_devlink_flags = DL_FLAG_AUTOPROBE_CONSUMER;
+	} else if (strcmp(arg, "rpm") == 0) {
+		fw_devlink_flags = DL_FLAG_AUTOPROBE_CONSUMER |
+				   DL_FLAG_PM_RUNTIME;
+	}
+	return 0;
+}
+early_param("fw_devlink", fw_devlink_setup);
+
+u32 fw_devlink_get_flags(void)
+{
+	return fw_devlink_flags;
+}
+
 /**
  * device_add - add device to device hierarchy.
  * @dev: device.
@@ -2375,6 +2404,7 @@ int device_add(struct device *dev)
 	struct class_interface *class_intf;
 	int error = -EINVAL, fw_ret;
 	struct kobject *glue_dir = NULL;
+	bool is_fwnode_dev = false;
 
 	dev = get_device(dev);
 	if (!dev)
@@ -2472,8 +2502,10 @@ int device_add(struct device *dev)
 
 	kobject_uevent(&dev->kobj, KOBJ_ADD);
 
-	if (dev->fwnode && !dev->fwnode->dev)
+	if (dev->fwnode && !dev->fwnode->dev) {
 		dev->fwnode->dev = dev;
+		is_fwnode_dev = true;
+	}
 
 	/*
 	 * Check if any of the other devices (consumers) have been waiting for
@@ -2489,7 +2521,8 @@ int device_add(struct device *dev)
 	 */
 	device_link_add_missing_supplier_links();
 
-	if (fwnode_has_op(dev->fwnode, add_links)) {
+	if (fw_devlink_flags && is_fwnode_dev &&
+	    fwnode_has_op(dev->fwnode, add_links)) {
 		fw_ret = fwnode_call_int_op(dev->fwnode, add_links, dev);
 		if (fw_ret == -ENODEV)
 			device_link_wait_for_mandatory_supplier(dev);

drivers/base/cpu.c

@@ -231,8 +231,7 @@ static struct cpu_attr cpu_attrs[] = {
 static ssize_t print_cpus_kernel_max(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	int n = snprintf(buf, PAGE_SIZE-2, "%d\n", NR_CPUS - 1);
-	return n;
+	return sprintf(buf, "%d\n", NR_CPUS - 1);
 }
 static DEVICE_ATTR(kernel_max, 0444, print_cpus_kernel_max, NULL);
 
@@ -258,13 +257,13 @@ static ssize_t print_cpus_offline(struct device *dev,
 			buf[n++] = ',';
 
 		if (nr_cpu_ids == total_cpus-1)
-			n += snprintf(&buf[n], len - n, "%u", nr_cpu_ids);
+			n += scnprintf(&buf[n], len - n, "%u", nr_cpu_ids);
 		else
-			n += snprintf(&buf[n], len - n, "%u-%d",
+			n += scnprintf(&buf[n], len - n, "%u-%d",
 						      nr_cpu_ids, total_cpus-1);
 	}
 
-	n += snprintf(&buf[n], len - n, "\n");
+	n += scnprintf(&buf[n], len - n, "\n");
 	return n;
 }
 static DEVICE_ATTR(offline, 0444, print_cpus_offline, NULL);
@@ -272,7 +271,7 @@ static DEVICE_ATTR(offline, 0444, print_cpus_offline, NULL);
 static ssize_t print_cpus_isolated(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
-	int n = 0, len = PAGE_SIZE-2;
+	int n;
 	cpumask_var_t isolated;
 
 	if (!alloc_cpumask_var(&isolated, GFP_KERNEL))
@@ -280,7 +279,7 @@ static ssize_t print_cpus_isolated(struct device *dev,
 
 	cpumask_andnot(isolated, cpu_possible_mask,
 		       housekeeping_cpumask(HK_FLAG_DOMAIN));
-	n = scnprintf(buf, len, "%*pbl\n", cpumask_pr_args(isolated));
+	n = sprintf(buf, "%*pbl\n", cpumask_pr_args(isolated));
 
 	free_cpumask_var(isolated);
 
@@ -292,11 +291,7 @@ static DEVICE_ATTR(isolated, 0444, print_cpus_isolated, NULL);
 static ssize_t print_cpus_nohz_full(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
-	int n = 0, len = PAGE_SIZE-2;
-
-	n = scnprintf(buf, len, "%*pbl\n", cpumask_pr_args(tick_nohz_full_mask));
-
-	return n;
+	return sprintf(buf, "%*pbl\n", cpumask_pr_args(tick_nohz_full_mask));
 }
 static DEVICE_ATTR(nohz_full, 0444, print_cpus_nohz_full, NULL);
 #endif

drivers/base/dd.c

@@ -224,76 +224,52 @@ static int deferred_devs_show(struct seq_file *s, void *data)
 }
 DEFINE_SHOW_ATTRIBUTE(deferred_devs);
 
-static int deferred_probe_timeout = -1;
+#ifdef CONFIG_MODULES
+/*
+ * In the case of modules, set the default probe timeout to
+ * 30 seconds to give userland some time to load needed modules
+ */
+int driver_deferred_probe_timeout = 30;
+#else
+/* In the case of !modules, no probe timeout needed */
+int driver_deferred_probe_timeout = -1;
+#endif
+EXPORT_SYMBOL_GPL(driver_deferred_probe_timeout);
+
 static int __init deferred_probe_timeout_setup(char *str)
 {
 	int timeout;
 
 	if (!kstrtoint(str, 10, &timeout))
-		deferred_probe_timeout = timeout;
+		driver_deferred_probe_timeout = timeout;
 	return 1;
 }
 __setup("deferred_probe_timeout=", deferred_probe_timeout_setup);
 
-static int __driver_deferred_probe_check_state(struct device *dev)
-{
-	if (!initcalls_done)
-		return -EPROBE_DEFER;
-
-	if (!deferred_probe_timeout) {
-		dev_WARN(dev, "deferred probe timeout, ignoring dependency");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
 /**
  * driver_deferred_probe_check_state() - Check deferred probe state
  * @dev: device to check
  *
- * Returns -ENODEV if init is done and all built-in drivers have had a chance
- * to probe (i.e. initcalls are done), -ETIMEDOUT if deferred probe debug
- * timeout has expired, or -EPROBE_DEFER if none of those conditions are met.
+ * Return:
+ * -ENODEV if initcalls have completed and modules are disabled.
+ * -ETIMEDOUT if the deferred probe timeout was set and has expired
+ *  and modules are enabled.
+ * -EPROBE_DEFER in other cases.
  *
  * Drivers or subsystems can opt-in to calling this function instead of directly
  * returning -EPROBE_DEFER.
  */
 int driver_deferred_probe_check_state(struct device *dev)
 {
-	int ret;
-
-	ret = __driver_deferred_probe_check_state(dev);
-	if (ret < 0)
-		return ret;
-
-	dev_warn(dev, "ignoring dependency for device, assuming no driver");
-
-	return -ENODEV;
-}
-
-/**
- * driver_deferred_probe_check_state_continue() - check deferred probe state
- * @dev: device to check
- *
- * Returns -ETIMEDOUT if deferred probe debug timeout has expired, or
- * -EPROBE_DEFER otherwise.
- *
- * Drivers or subsystems can opt-in to calling this function instead of
- * directly returning -EPROBE_DEFER.
- *
- * This is similar to driver_deferred_probe_check_state(), but it allows the
- * subsystem to keep deferring probe after built-in drivers have had a chance
- * to probe. One scenario where that is useful is if built-in drivers rely on
- * resources that are provided by modular drivers.
- */
-int driver_deferred_probe_check_state_continue(struct device *dev)
-{
-	int ret;
+	if (!IS_ENABLED(CONFIG_MODULES) && initcalls_done) {
+		dev_warn(dev, "ignoring dependency for device, assuming no driver");
+		return -ENODEV;
+	}
 
-	ret = __driver_deferred_probe_check_state(dev);
-	if (ret < 0)
-		return ret;
+	if (!driver_deferred_probe_timeout) {
+		dev_WARN(dev, "deferred probe timeout, ignoring dependency");
+		return -ETIMEDOUT;
+	}
 
 	return -EPROBE_DEFER;
 }
@@ -302,7 +278,7 @@ static void deferred_probe_timeout_work_func(struct work_struct *work)
 {
 	struct device_private *private, *p;
 
-	deferred_probe_timeout = 0;
+	driver_deferred_probe_timeout = 0;
 	driver_deferred_probe_trigger();
 	flush_work(&deferred_probe_work);
 
@@ -336,9 +312,9 @@ static int deferred_probe_initcall(void)
 	driver_deferred_probe_trigger();
 	flush_work(&deferred_probe_work);
 
-	if (deferred_probe_timeout > 0) {
+	if (driver_deferred_probe_timeout > 0) {
 		schedule_delayed_work(&deferred_probe_timeout_work,
-			deferred_probe_timeout * HZ);
+			driver_deferred_probe_timeout * HZ);
 	}
 	return 0;
 }
@@ -668,9 +644,10 @@ static int really_probe_debug(struct device *dev, struct device_driver *drv)
  */
 int driver_probe_done(void)
 {
-	pr_debug("%s: probe_count = %d\n", __func__,
-		 atomic_read(&probe_count));
-	if (atomic_read(&probe_count))
+	int local_probe_count = atomic_read(&probe_count);
+
+	pr_debug("%s: probe_count = %d\n", __func__, local_probe_count);
+	if (local_probe_count)
 		return -EBUSY;
 	return 0;
 }
@@ -1222,7 +1199,7 @@ void driver_detach(struct device_driver *drv)
 			spin_unlock(&drv->p->klist_devices.k_lock);
 			break;
 		}
-		dev_prv = list_entry(drv->p->klist_devices.k_list.prev,
+		dev_prv = list_last_entry(&drv->p->klist_devices.k_list,
 				     struct device_private,
 				     knode_driver.n_node);
 		dev = dev_prv->device;

drivers/base/firmware_loader/Makefile

@@ -5,5 +5,6 @@ obj-$(CONFIG_FW_LOADER_USER_HELPER) += fallback_table.o
 obj-$(CONFIG_FW_LOADER)	+= firmware_class.o
 firmware_class-objs := main.o
 firmware_class-$(CONFIG_FW_LOADER_USER_HELPER) += fallback.o
+firmware_class-$(CONFIG_EFI_EMBEDDED_FIRMWARE) += fallback_platform.o
 
 obj-y += builtin/

drivers/base/firmware_loader/fallback.c

@@ -525,7 +525,7 @@ static int fw_load_sysfs_fallback(struct fw_sysfs *fw_sysfs,
 	}
 
 	retval = fw_sysfs_wait_timeout(fw_priv, timeout);
-	if (retval < 0) {
+	if (retval < 0 && retval != -ENOENT) {
 		mutex_lock(&fw_lock);
 		fw_load_abort(fw_sysfs);
 		mutex_unlock(&fw_lock);

drivers/base/firmware_loader/fallback.h

@@ -66,4 +66,14 @@ static inline void unregister_sysfs_loader(void)
 }
 #endif /* CONFIG_FW_LOADER_USER_HELPER */
 
+#ifdef CONFIG_EFI_EMBEDDED_FIRMWARE
+int firmware_fallback_platform(struct fw_priv *fw_priv, enum fw_opt opt_flags);
+#else
+static inline int firmware_fallback_platform(struct fw_priv *fw_priv,
+					     enum fw_opt opt_flags)
+{
+	return -ENOENT;
+}
+#endif
+
 #endif /* __FIRMWARE_FALLBACK_H */

drivers/base/firmware_loader/fallback_platform.c

+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/efi_embedded_fw.h>
+#include <linux/property.h>
+#include <linux/security.h>
+#include <linux/vmalloc.h>
+
+#include "fallback.h"
+#include "firmware.h"
+
+int firmware_fallback_platform(struct fw_priv *fw_priv, enum fw_opt opt_flags)
+{
+	const u8 *data;
+	size_t size;
+	int rc;
+
+	if (!(opt_flags & FW_OPT_FALLBACK_PLATFORM))
+		return -ENOENT;
+
+	rc = security_kernel_load_data(LOADING_FIRMWARE_EFI_EMBEDDED);
+	if (rc)
+		return rc;
+
+	rc = efi_get_embedded_fw(fw_priv->fw_name, &data, &size);
+	if (rc)
+		return rc; /* rc == -ENOENT when the fw was not found */
+
+	fw_priv->data = vmalloc(size);
+	if (!fw_priv->data)
+		return -ENOMEM;
+
+	memcpy(fw_priv->data, data, size);
+	fw_priv->size = size;
+	fw_state_done(fw_priv);
+	return 0;
+}

drivers/base/firmware_loader/firmware.h

@@ -29,6 +29,9 @@
  *	firmware caching mechanism.
  * @FW_OPT_NOFALLBACK_SYSFS: Disable the sysfs fallback mechanism. Takes
  *	precedence over &FW_OPT_UEVENT and &FW_OPT_USERHELPER.
+ * @FW_OPT_FALLBACK_PLATFORM: Enable fallback to device fw copy embedded in
+ *	the platform's main firmware. If both this fallback and the sysfs
+ *      fallback are enabled, then this fallback will be tried first.
  */
 enum fw_opt {
 	FW_OPT_UEVENT			= BIT(0),
@@ -37,6 +40,7 @@ enum fw_opt {
 	FW_OPT_NO_WARN			= BIT(3),
 	FW_OPT_NOCACHE			= BIT(4),
 	FW_OPT_NOFALLBACK_SYSFS		= BIT(5),
+	FW_OPT_FALLBACK_PLATFORM	= BIT(6),
 };
 
 enum fw_status {

drivers/base/firmware_loader/main.c

@@ -493,8 +493,10 @@ fw_get_filesystem_firmware(struct device *device, struct fw_priv *fw_priv,
 		}
 
 		fw_priv->size = 0;
-		rc = kernel_read_file_from_path(path, &buffer, &size,
-						msize, id);
+
+		/* load firmware files from the mount namespace of init */
+		rc = kernel_read_file_from_path_initns(path, &buffer,
+						       &size, msize, id);
 		if (rc) {
 			if (rc != -ENOENT)
 				dev_warn(device, "loading %s failed with error %d\n",
@@ -776,6 +778,9 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
 						 fw_decompress_xz);
 #endif
 
+	if (ret == -ENOENT)
+		ret = firmware_fallback_platform(fw->priv, opt_flags);
+
 	if (ret) {
 		if (!(opt_flags & FW_OPT_NO_WARN))
 			dev_warn(device,
@@ -883,6 +888,30 @@ int request_firmware_direct(const struct firmware **firmware_p,
 }
 EXPORT_SYMBOL_GPL(request_firmware_direct);
 
+/**
+ * firmware_request_platform() - request firmware with platform-fw fallback
+ * @firmware: pointer to firmware image
+ * @name: name of firmware file
+ * @device: device for which firmware is being loaded
+ *
+ * This function is similar in behaviour to request_firmware, except that if
+ * direct filesystem lookup fails, it will fallback to looking for a copy of the
+ * requested firmware embedded in the platform's main (e.g. UEFI) firmware.
+ **/
+int firmware_request_platform(const struct firmware **firmware,
+			      const char *name, struct device *device)
+{
+	int ret;
+
+	/* Need to pin this module until return */
+	__module_get(THIS_MODULE);
+	ret = _request_firmware(firmware, name, device, NULL, 0,
+				FW_OPT_UEVENT | FW_OPT_FALLBACK_PLATFORM);
+	module_put(THIS_MODULE);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(firmware_request_platform);
+
 /**
  * firmware_request_cache() - cache firmware for suspend so resume can use it
  * @name: name of firmware file

drivers/firmware/efi/Kconfig

@@ -239,6 +239,11 @@ config EFI_DISABLE_PCI_DMA
 
 endmenu
 
+config EFI_EMBEDDED_FIRMWARE
+	bool
+	depends on EFI
+	select CRYPTO_LIB_SHA256
+
 config UEFI_CPER
 	bool
 

drivers/firmware/efi/Makefile

@@ -26,6 +26,7 @@ obj-$(CONFIG_EFI_TEST)			+= test/
 obj-$(CONFIG_EFI_DEV_PATH_PARSER)	+= dev-path-parser.o
 obj-$(CONFIG_APPLE_PROPERTIES)		+= apple-properties.o
 obj-$(CONFIG_EFI_RCI2_TABLE)		+= rci2-table.o
+obj-$(CONFIG_EFI_EMBEDDED_FIRMWARE)	+= embedded-firmware.o
 
 fake_map-y				+= fake_mem.o
 fake_map-$(CONFIG_X86)			+= x86_fake_mem.o

drivers/firmware/efi/arm-init.c

@@ -349,7 +349,7 @@ static int efifb_add_links(const struct fwnode_handle *fwnode,
 	 * If this fails, retrying this function at a later point won't
 	 * change anything. So, don't return an error after this.
 	 */
-	if (!device_link_add(dev, sup_dev, 0))
+	if (!device_link_add(dev, sup_dev, fw_devlink_get_flags()))
 		dev_warn(dev, "device_link_add() failed\n");
 
 	put_device(sup_dev);

drivers/firmware/efi/efi.c

@@ -17,6 +17,7 @@
 #include <linux/kobject.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/debugfs.h>
 #include <linux/device.h>
 #include <linux/efi.h>
 #include <linux/of.h>
@@ -325,6 +326,59 @@ static __init int efivar_ssdt_load(void)
 static inline int efivar_ssdt_load(void) { return 0; }
 #endif
 
+#ifdef CONFIG_DEBUG_FS
+
+#define EFI_DEBUGFS_MAX_BLOBS 32
+
+static struct debugfs_blob_wrapper debugfs_blob[EFI_DEBUGFS_MAX_BLOBS];
+
+static void __init efi_debugfs_init(void)
+{
+	struct dentry *efi_debugfs;
+	efi_memory_desc_t *md;
+	char name[32];
+	int type_count[EFI_BOOT_SERVICES_DATA + 1] = {};
+	int i = 0;
+
+	efi_debugfs = debugfs_create_dir("efi", NULL);
+	if (IS_ERR_OR_NULL(efi_debugfs))
+		return;
+
+	for_each_efi_memory_desc(md) {
+		switch (md->type) {
+		case EFI_BOOT_SERVICES_CODE:
+			snprintf(name, sizeof(name), "boot_services_code%d",
+				 type_count[md->type]++);
+			break;
+		case EFI_BOOT_SERVICES_DATA:
+			snprintf(name, sizeof(name), "boot_services_data%d",
+				 type_count[md->type]++);
+			break;
+		default:
+			continue;
+		}
+
+		if (i >= EFI_DEBUGFS_MAX_BLOBS) {
+			pr_warn("More then %d EFI boot service segments, only showing first %d in debugfs\n",
+				EFI_DEBUGFS_MAX_BLOBS, EFI_DEBUGFS_MAX_BLOBS);
+			break;
+		}
+
+		debugfs_blob[i].size = md->num_pages << EFI_PAGE_SHIFT;
+		debugfs_blob[i].data = memremap(md->phys_addr,
+						debugfs_blob[i].size,
+						MEMREMAP_WB);
+		if (!debugfs_blob[i].data)
+			continue;
+
+		debugfs_create_blob(name, 0400, efi_debugfs, &debugfs_blob[i]);
+		i++;
+	}
+}
+#else
+static inline void efi_debugfs_init(void) {}
+#endif
+
 /*
  * We register the efi subsystem with the firmware subsystem and the
  * efivars subsystem with the efi subsystem, if the system was booted with
@@ -381,6 +435,9 @@ static int __init efisubsys_init(void)
 		goto err_remove_group;
 	}
 
+	if (efi_enabled(EFI_DBG) && efi_enabled(EFI_PRESERVE_BS_REGIONS))
+		efi_debugfs_init();
+
 	return 0;
 
 err_remove_group:

drivers/firmware/efi/embedded-firmware.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for extracting embedded firmware for peripherals from EFI code,
+ *
+ * Copyright (c) 2018 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/dmi.h>
+#include <linux/efi.h>
+#include <linux/efi_embedded_fw.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <crypto/sha.h>
+
+/* Exported for use by lib/test_firmware.c only */
+LIST_HEAD(efi_embedded_fw_list);
+EXPORT_SYMBOL_GPL(efi_embedded_fw_list);
+
+static bool checked_for_fw;
+
+static const struct dmi_system_id * const embedded_fw_table[] = {
+#ifdef CONFIG_TOUCHSCREEN_DMI
+	touchscreen_dmi_table,
+#endif
+	NULL
+};
+
+/*
+ * Note the efi_check_for_embedded_firmwares() code currently makes the
+ * following 2 assumptions. This may needs to be revisited if embedded firmware
+ * is found where this is not true:
+ * 1) The firmware is only found in EFI_BOOT_SERVICES_CODE memory segments
+ * 2) The firmware always starts at an offset which is a multiple of 8 bytes
+ */
+static int __init efi_check_md_for_embedded_firmware(
+	efi_memory_desc_t *md, const struct efi_embedded_fw_desc *desc)
+{
+	struct sha256_state sctx;
+	struct efi_embedded_fw *fw;
+	u8 sha256[32];
+	u64 i, size;
+	u8 *map;
+
+	size = md->num_pages << EFI_PAGE_SHIFT;
+	map = memremap(md->phys_addr, size, MEMREMAP_WB);
+	if (!map) {
+		pr_err("Error mapping EFI mem at %#llx\n", md->phys_addr);
+		return -ENOMEM;
+	}
+
+	for (i = 0; (i + desc->length) <= size; i += 8) {
+		if (memcmp(map + i, desc->prefix, EFI_EMBEDDED_FW_PREFIX_LEN))
+			continue;
+
+		sha256_init(&sctx);
+		sha256_update(&sctx, map + i, desc->length);
+		sha256_final(&sctx, sha256);
+		if (memcmp(sha256, desc->sha256, 32) == 0)
+			break;
+	}
+	if ((i + desc->length) > size) {
+		memunmap(map);
+		return -ENOENT;
+	}
+
+	pr_info("Found EFI embedded fw '%s'\n", desc->name);
+
+	fw = kmalloc(sizeof(*fw), GFP_KERNEL);
+	if (!fw) {
+		memunmap(map);
+		return -ENOMEM;
+	}
+
+	fw->data = kmemdup(map + i, desc->length, GFP_KERNEL);
+	memunmap(map);
+	if (!fw->data) {
+		kfree(fw);
+		return -ENOMEM;
+	}
+
+	fw->name = desc->name;
+	fw->length = desc->length;
+	list_add(&fw->list, &efi_embedded_fw_list);
+
+	return 0;
+}
+
+void __init efi_check_for_embedded_firmwares(void)
+{
+	const struct efi_embedded_fw_desc *fw_desc;
+	const struct dmi_system_id *dmi_id;
+	efi_memory_desc_t *md;
+	int i, r;
+
+	for (i = 0; embedded_fw_table[i]; i++) {
+		dmi_id = dmi_first_match(embedded_fw_table[i]);
+		if (!dmi_id)
+			continue;
+
+		fw_desc = dmi_id->driver_data;
+
+		/*
+		 * In some drivers the struct driver_data contains may contain
+		 * other driver specific data after the fw_desc struct; and
+		 * the fw_desc struct itself may be empty, skip these.
+		 */
+		if (!fw_desc->name)
+			continue;
+
+		for_each_efi_memory_desc(md) {
+			if (md->type != EFI_BOOT_SERVICES_CODE)
+				continue;
+
+			r = efi_check_md_for_embedded_firmware(md, fw_desc);
+			if (r == 0)
+				break;
+		}
+	}
+
+	checked_for_fw = true;
+}
+
+int efi_get_embedded_fw(const char *name, const u8 **data, size_t *size)
+{
+	struct efi_embedded_fw *iter, *fw = NULL;
+
+	if (!checked_for_fw) {
+		pr_warn("Warning %s called while we did not check for embedded fw\n",
+			__func__);
+		return -ENOENT;
+	}
+
+	list_for_each_entry(iter, &efi_embedded_fw_list, list) {
+		if (strcmp(name, iter->name) == 0) {
+			fw = iter;
+			break;
+		}
+	}
+
+	if (!fw)
+		return -ENOENT;
+
+	*data = fw->data;
+	*size = fw->length;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(efi_get_embedded_fw);

drivers/input/touchscreen/chipone_icn8505.c

@@ -288,7 +288,7 @@ static int icn8505_upload_fw(struct icn8505_data *icn8505)
 	 * we may need it at resume. Having loaded it once will make the
 	 * firmware class code cache it at suspend/resume.
 	 */
-	error = request_firmware(&fw, icn8505->firmware_name, dev);
+	error = firmware_request_platform(&fw, icn8505->firmware_name, dev);
 	if (error) {
 		dev_err(dev, "Firmware request error %d\n", error);
 		return error;

drivers/input/touchscreen/silead.c

@@ -288,7 +288,7 @@ static int silead_ts_load_fw(struct i2c_client *client)
 
 	dev_dbg(dev, "Firmware file name: %s", data->fw_name);
 
-	error = request_firmware(&fw, data->fw_name, dev);
+	error = firmware_request_platform(&fw, data->fw_name, dev);
 	if (error) {
 		dev_err(dev, "Firmware request error %d\n", error);
 		return error;

drivers/of/property.c

@@ -1262,7 +1262,7 @@ static int of_link_property(struct device *dev, struct device_node *con_np,
 	u32 dl_flags;
 
 	if (dev->of_node == con_np)
-		dl_flags = DL_FLAG_AUTOPROBE_CONSUMER;
+		dl_flags = fw_devlink_get_flags();
 	else
 		dl_flags = DL_FLAG_SYNC_STATE_ONLY;
 
@@ -1299,15 +1299,9 @@ static int of_link_to_suppliers(struct device *dev,
 	return ret;
 }
 
-static bool of_devlink;
-core_param(of_devlink, of_devlink, bool, 0);
-
 static int of_fwnode_add_links(const struct fwnode_handle *fwnode,
 			       struct device *dev)
 {
-	if (!of_devlink)
-		return 0;
-
 	if (unlikely(!is_of_node(fwnode)))
 		return 0;
 

drivers/pinctrl/devicetree.c

@@ -127,11 +127,12 @@ static int dt_to_map_one_config(struct pinctrl *p,
 		np_pctldev = of_get_next_parent(np_pctldev);
 		if (!np_pctldev || of_node_is_root(np_pctldev)) {
 			of_node_put(np_pctldev);
+			ret = driver_deferred_probe_check_state(p->dev);
 			/* keep deferring if modules are enabled unless we've timed out */
-			if (IS_ENABLED(CONFIG_MODULES) && !allow_default)
-				return driver_deferred_probe_check_state_continue(p->dev);
-
-			return driver_deferred_probe_check_state(p->dev);
+			if (IS_ENABLED(CONFIG_MODULES) && !allow_default &&
+			    (ret == -ENODEV))
+				ret = -EPROBE_DEFER;
+			return ret;
 		}
 		/* If we're creating a hog we can use the passed pctldev */
 		if (hog_pctldev && (np_pctldev == p->dev->of_node)) {

drivers/platform/x86/Kconfig

@@ -1252,6 +1252,7 @@ config INTEL_TURBO_MAX_3
 config TOUCHSCREEN_DMI
 	bool "DMI based touchscreen configuration info"
 	depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD
+	select EFI_EMBEDDED_FIRMWARE if EFI
 	---help---
 	  Certain ACPI based tablets with e.g. Silead or Chipone touchscreens
 	  do not have enough data in ACPI tables for the touchscreen driver to

drivers/platform/x86/touchscreen_dmi.c

@@ -11,12 +11,15 @@
 #include <linux/acpi.h>
 #include <linux/device.h>
 #include <linux/dmi.h>
+#include <linux/efi_embedded_fw.h>
 #include <linux/i2c.h>
 #include <linux/notifier.h>
 #include <linux/property.h>
 #include <linux/string.h>
 
 struct ts_dmi_data {
+	/* The EFI embedded-fw code expects this to be the first member! */
+	struct efi_embedded_fw_desc embedded_fw;
 	const char *acpi_name;
 	const struct property_entry *properties;
 };
@@ -64,6 +67,15 @@ static const struct property_entry chuwi_hi8_pro_props[] = {
 };
 
 static const struct ts_dmi_data chuwi_hi8_pro_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl3680-chuwi-hi8-pro.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 39864,
+		.sha256	= { 0xc0, 0x88, 0xc5, 0xef, 0xd1, 0x70, 0x77, 0x59,
+			    0x4e, 0xe9, 0xc4, 0xd8, 0x2e, 0xcd, 0xbf, 0x95,
+			    0x32, 0xd9, 0x03, 0x28, 0x0d, 0x48, 0x9f, 0x92,
+			    0x35, 0x37, 0xf6, 0x8b, 0x2a, 0xe4, 0x73, 0xff },
+	},
 	.acpi_name	= "MSSL1680:00",
 	.properties	= chuwi_hi8_pro_props,
 };
@@ -120,6 +132,18 @@ static const struct ts_dmi_data chuwi_vi8_data = {
 	.properties     = chuwi_vi8_props,
 };
 
+static const struct ts_dmi_data chuwi_vi8_plus_data = {
+	.embedded_fw = {
+		.name	= "chipone/icn8505-HAMP0002.fw",
+		.prefix = { 0xb0, 0x07, 0x00, 0x00, 0xe4, 0x07, 0x00, 0x00 },
+		.length	= 35012,
+		.sha256	= { 0x93, 0xe5, 0x49, 0xe0, 0xb6, 0xa2, 0xb4, 0xb3,
+			    0x88, 0x96, 0x34, 0x97, 0x5e, 0xa8, 0x13, 0x78,
+			    0x72, 0x98, 0xb8, 0x29, 0xeb, 0x5c, 0xa7, 0xf1,
+			    0x25, 0x13, 0x43, 0xf4, 0x30, 0x7c, 0xfc, 0x7c },
+	},
+};
+
 static const struct property_entry chuwi_vi10_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 0),
 	PROPERTY_ENTRY_U32("touchscreen-min-y", 4),
@@ -181,6 +205,15 @@ static const struct property_entry cube_iwork8_air_props[] = {
 };
 
 static const struct ts_dmi_data cube_iwork8_air_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl3670-cube-iwork8-air.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 38808,
+		.sha256	= { 0xff, 0x62, 0x2d, 0xd1, 0x8a, 0x78, 0x04, 0x7b,
+			    0x33, 0x06, 0xb0, 0x4f, 0x7f, 0x02, 0x08, 0x9c,
+			    0x96, 0xd4, 0x9f, 0x04, 0xe1, 0x47, 0x25, 0x25,
+			    0x60, 0x77, 0x41, 0x33, 0xeb, 0x12, 0x82, 0xfc },
+	},
 	.acpi_name	= "MSSL1680:00",
 	.properties	= cube_iwork8_air_props,
 };
@@ -387,6 +420,15 @@ static const struct property_entry onda_v80_plus_v3_props[] = {
 };
 
 static const struct ts_dmi_data onda_v80_plus_v3_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl3676-onda-v80-plus-v3.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 37224,
+		.sha256	= { 0x8f, 0xbd, 0x8f, 0x0c, 0x6b, 0xba, 0x5b, 0xf5,
+			    0xa3, 0xc7, 0xa3, 0xc0, 0x4f, 0xcd, 0xdf, 0x32,
+			    0xcc, 0xe4, 0x70, 0xd6, 0x46, 0x9c, 0xd7, 0xa7,
+			    0x4b, 0x82, 0x3f, 0xab, 0xc7, 0x90, 0xea, 0x23 },
+	},
 	.acpi_name	= "MSSL1680:00",
 	.properties	= onda_v80_plus_v3_props,
 };
@@ -449,6 +491,15 @@ static const struct property_entry pipo_w2s_props[] = {
 };
 
 static const struct ts_dmi_data pipo_w2s_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl1680-pipo-w2s.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 39072,
+		.sha256	= { 0xd0, 0x58, 0xc4, 0x7d, 0x55, 0x2d, 0x62, 0x18,
+			    0xd1, 0x6a, 0x71, 0x73, 0x0b, 0x3f, 0xbe, 0x60,
+			    0xbb, 0x45, 0x8c, 0x52, 0x27, 0xb7, 0x18, 0xf4,
+			    0x31, 0x00, 0x6a, 0x49, 0x76, 0xd8, 0x7c, 0xd3 },
+	},
 	.acpi_name	= "MSSL1680:00",
 	.properties	= pipo_w2s_props,
 };
@@ -641,7 +692,7 @@ static const struct ts_dmi_data trekstor_surftab_wintron70_data = {
 };
 
 /* NOTE: Please keep this table sorted alphabetically */
-static const struct dmi_system_id touchscreen_dmi_table[] = {
+const struct dmi_system_id touchscreen_dmi_table[] = {
 	{
 		/* Chuwi Hi8 */
 		.driver_data = (void *)&chuwi_hi8_data,
@@ -703,6 +754,15 @@ static const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_BIOS_VERSION, "CHUWI.D86JLBNR"),
 		},
 	},
+	{
+		/* Chuwi Vi8 Plus (CWI519) */
+		.driver_data = (void *)&chuwi_vi8_plus_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"),
+			DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+		},
+	},
 	{
 		/* Chuwi Vi10 (CWI505) */
 		.driver_data = (void *)&chuwi_vi10_data,
@@ -1106,6 +1166,9 @@ static int __init ts_dmi_init(void)
 		return 0; /* Not an error */
 
 	ts_data = dmi_id->driver_data;
+	/* Some dmi table entries only provide an efi_embedded_fw_desc */
+	if (!ts_data->properties)
+		return 0;
 
 	error = bus_register_notifier(&i2c_bus_type, &ts_dmi_notifier);
 	if (error)

drivers/regulator/core.c

@@ -5757,6 +5757,10 @@ static DECLARE_DELAYED_WORK(regulator_init_complete_work,
 
 static int __init regulator_init_complete(void)
 {
+	int delay = driver_deferred_probe_timeout;
+
+	if (delay < 0)
+		delay = 0;
 	/*
 	 * Since DT doesn't provide an idiomatic mechanism for
 	 * enabling full constraints and since it's much more natural
@@ -5767,18 +5771,17 @@ static int __init regulator_init_complete(void)
 		has_full_constraints = true;
 
 	/*
-	 * We punt completion for an arbitrary amount of time since
-	 * systems like distros will load many drivers from userspace
-	 * so consumers might not always be ready yet, this is
-	 * particularly an issue with laptops where this might bounce
-	 * the display off then on.  Ideally we'd get a notification
-	 * from userspace when this happens but we don't so just wait
-	 * a bit and hope we waited long enough.  It'd be better if
-	 * we'd only do this on systems that need it, and a kernel
-	 * command line option might be useful.
+	 * If driver_deferred_probe_timeout is set, we punt
+	 * completion for that many seconds since systems like
+	 * distros will load many drivers from userspace so consumers
+	 * might not always be ready yet, this is particularly an
+	 * issue with laptops where this might bounce the display off
+	 * then on.  Ideally we'd get a notification from userspace
+	 * when this happens but we don't so just wait a bit and hope
+	 * we waited long enough.  It'd be better if we'd only do
+	 * this on systems that need it.
 	 */
-	schedule_delayed_work(&regulator_init_complete_work,
-			      msecs_to_jiffies(30000));
+	schedule_delayed_work(&regulator_init_complete_work, delay * HZ);
 
 	return 0;
 }

fs/debugfs/file.c

@@ -175,8 +175,13 @@ static int open_proxy_open(struct inode *inode, struct file *filp)
 	if (r)
 		goto out;
 
-	real_fops = fops_get(real_fops);
-	if (!real_fops) {
+	if (!fops_get(real_fops)) {
+#ifdef MODULE
+		if (real_fops->owner &&
+		    real_fops->owner->state == MODULE_STATE_GOING)
+			goto out;
+#endif
+
 		/* Huh? Module did not clean up after itself at exit? */
 		WARN(1, "debugfs file owner did not clean up at exit: %pd",
 			dentry);
@@ -305,8 +310,13 @@ static int full_proxy_open(struct inode *inode, struct file *filp)
 	if (r)
 		goto out;
 
-	real_fops = fops_get(real_fops);
-	if (!real_fops) {
+	if (!fops_get(real_fops)) {
+#ifdef MODULE
+		if (real_fops->owner &&
+		    real_fops->owner->state == MODULE_STATE_GOING)
+			goto out;
+#endif
+
 		/* Huh? Module did not cleanup after itself at exit? */
 		WARN(1, "debugfs file owner did not clean up at exit: %pd",
 			dentry);

fs/debugfs/inode.c

@@ -501,26 +501,16 @@ EXPORT_SYMBOL_GPL(debugfs_create_file_unsafe);
  * wide range of flexibility in creating a file, or a directory (if you want
  * to create a directory, the debugfs_create_dir() function is
  * recommended to be used instead.)
- *
- * This function will return a pointer to a dentry if it succeeds.  This
- * pointer must be passed to the debugfs_remove() function when the file is
- * to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.)  If an error occurs, ERR_PTR(-ERROR) will be
- * returned.
- *
- * If debugfs is not enabled in the kernel, the value -%ENODEV will be
- * returned.
  */
-struct dentry *debugfs_create_file_size(const char *name, umode_t mode,
-					struct dentry *parent, void *data,
-					const struct file_operations *fops,
-					loff_t file_size)
+void debugfs_create_file_size(const char *name, umode_t mode,
+			      struct dentry *parent, void *data,
+			      const struct file_operations *fops,
+			      loff_t file_size)
 {
 	struct dentry *de = debugfs_create_file(name, mode, parent, data, fops);
 
 	if (de)
 		d_inode(de)->i_size = file_size;
-	return de;
 }
 EXPORT_SYMBOL_GPL(debugfs_create_file_size);
 

fs/exec.c

@@ -985,6 +985,32 @@ int kernel_read_file_from_path(const char *path, void **buf, loff_t *size,
 }
 EXPORT_SYMBOL_GPL(kernel_read_file_from_path);
 
+int kernel_read_file_from_path_initns(const char *path, void **buf,
+				      loff_t *size, loff_t max_size,
+				      enum kernel_read_file_id id)
+{
+	struct file *file;
+	struct path root;
+	int ret;
+
+	if (!path || !*path)
+		return -EINVAL;
+
+	task_lock(&init_task);
+	get_fs_root(init_task.fs, &root);
+	task_unlock(&init_task);
+
+	file = file_open_root(root.dentry, root.mnt, path, O_RDONLY, 0);
+	path_put(&root);
+	if (IS_ERR(file))
+		return PTR_ERR(file);
+
+	ret = kernel_read_file(file, buf, size, max_size, id);
+	fput(file);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(kernel_read_file_from_path_initns);
+
 int kernel_read_file_from_fd(int fd, void **buf, loff_t *size, loff_t max_size,
 			     enum kernel_read_file_id id)
 {

fs/libfs.c

@@ -891,7 +891,7 @@ int simple_attr_open(struct inode *inode, struct file *file,
 {
 	struct simple_attr *attr;
 
-	attr = kmalloc(sizeof(*attr), GFP_KERNEL);
+	attr = kzalloc(sizeof(*attr), GFP_KERNEL);
 	if (!attr)
 		return -ENOMEM;
 
@@ -931,9 +931,11 @@ ssize_t simple_attr_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 
-	if (*ppos) {		/* continued read */
+	if (*ppos && attr->get_buf[0]) {
+		/* continued read */
 		size = strlen(attr->get_buf);
-	} else {		/* first read */
+	} else {
+		/* first read */
 		u64 val;
 		ret = attr->get(attr->data, &val);
 		if (ret)

include/linux/arch_topology.h

@@ -16,9 +16,7 @@ bool topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu);
 
 DECLARE_PER_CPU(unsigned long, cpu_scale);
 
-struct sched_domain;
-static inline
-unsigned long topology_get_cpu_scale(int cpu)
+static inline unsigned long topology_get_cpu_scale(int cpu)
 {
 	return per_cpu(cpu_scale, cpu);
 }
@@ -27,8 +25,7 @@ void topology_set_cpu_scale(unsigned int cpu, unsigned long capacity);
 
 DECLARE_PER_CPU(unsigned long, freq_scale);
 
-static inline
-unsigned long topology_get_freq_scale(int cpu)
+static inline unsigned long topology_get_freq_scale(int cpu)
 {
 	return per_cpu(freq_scale, cpu);
 }

include/linux/debugfs.h

@@ -67,10 +67,10 @@ struct dentry *debugfs_create_file_unsafe(const char *name, umode_t mode,
 				   struct dentry *parent, void *data,
 				   const struct file_operations *fops);
 
-struct dentry *debugfs_create_file_size(const char *name, umode_t mode,
-					struct dentry *parent, void *data,
-					const struct file_operations *fops,
-					loff_t file_size);
+void debugfs_create_file_size(const char *name, umode_t mode,
+			      struct dentry *parent, void *data,
+			      const struct file_operations *fops,
+			      loff_t file_size);
 
 struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
 
@@ -181,13 +181,11 @@ static inline struct dentry *debugfs_create_file_unsafe(const char *name,
 	return ERR_PTR(-ENODEV);
 }
 
-static inline struct dentry *debugfs_create_file_size(const char *name, umode_t mode,
-					struct dentry *parent, void *data,
-					const struct file_operations *fops,
-					loff_t file_size)
-{
-	return ERR_PTR(-ENODEV);
-}
+static inline void debugfs_create_file_size(const char *name, umode_t mode,
+					    struct dentry *parent, void *data,
+					    const struct file_operations *fops,
+					    loff_t file_size)
+{ }
 
 static inline struct dentry *debugfs_create_dir(const char *name,
 						struct dentry *parent)

include/linux/device/driver.h

@@ -236,9 +236,9 @@ driver_find_device_by_acpi_dev(struct device_driver *drv, const void *adev)
 }
 #endif
 
+extern int driver_deferred_probe_timeout;
 void driver_deferred_probe_add(struct device *dev);
 int driver_deferred_probe_check_state(struct device *dev);
-int driver_deferred_probe_check_state_continue(struct device *dev);
 void driver_init(void);
 
 /**

include/linux/efi.h

@@ -1124,6 +1124,7 @@ extern int __init efi_setup_pcdp_console(char *);
 #define EFI_NX_PE_DATA		9	/* Can runtime data regions be mapped non-executable? */
 #define EFI_MEM_ATTR		10	/* Did firmware publish an EFI_MEMORY_ATTRIBUTES table? */
 #define EFI_MEM_NO_SOFT_RESERVE	11	/* Is the kernel configured to ignore soft reservations? */
+#define EFI_PRESERVE_BS_REGIONS	12	/* Are EFI boot-services memory segments available? */
 
 #ifdef CONFIG_EFI
 /*
@@ -1553,6 +1554,12 @@ static inline void
 efi_enable_reset_attack_mitigation(void) { }
 #endif
 
+#ifdef CONFIG_EFI_EMBEDDED_FIRMWARE
+void efi_check_for_embedded_firmwares(void);
+#else
+static inline void efi_check_for_embedded_firmwares(void) { }
+#endif
+
 efi_status_t efi_random_get_seed(void);
 
 void efi_retrieve_tpm2_eventlog(void);

include/linux/efi_embedded_fw.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_EFI_EMBEDDED_FW_H
+#define _LINUX_EFI_EMBEDDED_FW_H
+
+#include <linux/list.h>
+#include <linux/mod_devicetable.h>
+
+#define EFI_EMBEDDED_FW_PREFIX_LEN		8
+
+/*
+ * This struct and efi_embedded_fw_list are private to the efi-embedded fw
+ * implementation they are in this header for use by lib/test_firmware.c only!
+ */
+struct efi_embedded_fw {
+	struct list_head list;
+	const char *name;
+	const u8 *data;
+	size_t length;
+};
+
+extern struct list_head efi_embedded_fw_list;
+
+/**
+ * struct efi_embedded_fw_desc - This struct is used by the EFI embedded-fw
+ *                               code to search for embedded firmwares.
+ *
+ * @name:   Name to register the firmware with if found
+ * @prefix: First 8 bytes of the firmware
+ * @length: Length of the firmware in bytes including prefix
+ * @sha256: SHA256 of the firmware
+ */
+struct efi_embedded_fw_desc {
+	const char *name;
+	u8 prefix[EFI_EMBEDDED_FW_PREFIX_LEN];
+	u32 length;
+	u8 sha256[32];
+};
+
+extern const struct dmi_system_id touchscreen_dmi_table[];
+
+int efi_get_embedded_fw(const char *name, const u8 **dat, size_t *sz);
+
+#endif

include/linux/firmware.h

@@ -44,6 +44,8 @@ int request_firmware(const struct firmware **fw, const char *name,
 		     struct device *device);
 int firmware_request_nowarn(const struct firmware **fw, const char *name,
 			    struct device *device);
+int firmware_request_platform(const struct firmware **fw, const char *name,
+			      struct device *device);
 int request_firmware_nowait(
 	struct module *module, bool uevent,
 	const char *name, struct device *device, gfp_t gfp, void *context,
@@ -69,6 +71,13 @@ static inline int firmware_request_nowarn(const struct firmware **fw,
 	return -EINVAL;
 }
 
+static inline int firmware_request_platform(const struct firmware **fw,
+					    const char *name,
+					    struct device *device)
+{
+	return -EINVAL;
+}
+
 static inline int request_firmware_nowait(
 	struct module *module, bool uevent,
 	const char *name, struct device *device, gfp_t gfp, void *context,

include/linux/fs.h

@@ -2982,6 +2982,7 @@ extern int do_pipe_flags(int *, int);
 	id(UNKNOWN, unknown)		\
 	id(FIRMWARE, firmware)		\
 	id(FIRMWARE_PREALLOC_BUFFER, firmware)	\
+	id(FIRMWARE_EFI_EMBEDDED, firmware)	\
 	id(MODULE, kernel-module)		\
 	id(KEXEC_IMAGE, kexec-image)		\
 	id(KEXEC_INITRAMFS, kexec-initramfs)	\
@@ -3012,6 +3013,8 @@ extern int kernel_read_file(struct file *, void **, loff_t *, loff_t,
 			    enum kernel_read_file_id);
 extern int kernel_read_file_from_path(const char *, void **, loff_t *, loff_t,
 				      enum kernel_read_file_id);
+extern int kernel_read_file_from_path_initns(const char *, void **, loff_t *, loff_t,
+					     enum kernel_read_file_id);
 extern int kernel_read_file_from_fd(int, void **, loff_t *, loff_t,
 				    enum kernel_read_file_id);
 extern ssize_t kernel_read(struct file *, void *, size_t, loff_t *);

include/linux/fwnode.h

@@ -170,4 +170,6 @@ struct fwnode_operations {
 	} while (false)
 #define get_dev_from_fwnode(fwnode)	get_device((fwnode)->dev)
 
+extern u32 fw_devlink_get_flags(void);
+
 #endif

include/linux/platform_device.h

@@ -92,7 +92,7 @@ struct platform_device_info {
 		size_t size_data;
 		u64 dma_mask;
 
-		struct property_entry *properties;
+		const struct property_entry *properties;
 };
 extern struct platform_device *platform_device_register_full(
 		const struct platform_device_info *pdevinfo);

lib/test_firmware.c

@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/vmalloc.h>
+#include <linux/efi_embedded_fw.h>
 
 #define TEST_FIRMWARE_NAME	"test-firmware.bin"
 #define TEST_FIRMWARE_NUM_REQS	4
@@ -507,6 +508,57 @@ static ssize_t trigger_request_store(struct device *dev,
 }
 static DEVICE_ATTR_WO(trigger_request);
 
+#ifdef CONFIG_EFI_EMBEDDED_FIRMWARE
+static ssize_t trigger_request_platform_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	static const u8 test_data[] = {
+		0x55, 0xaa, 0x55, 0xaa, 0x01, 0x02, 0x03, 0x04,
+		0x55, 0xaa, 0x55, 0xaa, 0x05, 0x06, 0x07, 0x08,
+		0x55, 0xaa, 0x55, 0xaa, 0x10, 0x20, 0x30, 0x40,
+		0x55, 0xaa, 0x55, 0xaa, 0x50, 0x60, 0x70, 0x80
+	};
+	struct efi_embedded_fw efi_embedded_fw;
+	const struct firmware *firmware = NULL;
+	char *name;
+	int rc;
+
+	name = kstrndup(buf, count, GFP_KERNEL);
+	if (!name)
+		return -ENOSPC;
+
+	pr_info("inserting test platform fw '%s'\n", name);
+	efi_embedded_fw.name = name;
+	efi_embedded_fw.data = (void *)test_data;
+	efi_embedded_fw.length = sizeof(test_data);
+	list_add(&efi_embedded_fw.list, &efi_embedded_fw_list);
+
+	pr_info("loading '%s'\n", name);
+	rc = firmware_request_platform(&firmware, name, dev);
+	if (rc) {
+		pr_info("load of '%s' failed: %d\n", name, rc);
+		goto out;
+	}
+	if (firmware->size != sizeof(test_data) ||
+	    memcmp(firmware->data, test_data, sizeof(test_data)) != 0) {
+		pr_info("firmware contents mismatch for '%s'\n", name);
+		rc = -EINVAL;
+		goto out;
+	}
+	pr_info("loaded: %zu\n", firmware->size);
+	rc = count;
+
+out:
+	release_firmware(firmware);
+	list_del(&efi_embedded_fw.list);
+	kfree(name);
+
+	return rc;
+}
+static DEVICE_ATTR_WO(trigger_request_platform);
+#endif
+
 static DECLARE_COMPLETION(async_fw_done);
 
 static void trigger_async_request_cb(const struct firmware *fw, void *context)
@@ -903,6 +955,9 @@ static struct attribute *test_dev_attrs[] = {
 	TEST_FW_DEV_ATTR(trigger_request),
 	TEST_FW_DEV_ATTR(trigger_async_request),
 	TEST_FW_DEV_ATTR(trigger_custom_fallback),
+#ifdef CONFIG_EFI_EMBEDDED_FIRMWARE
+	TEST_FW_DEV_ATTR(trigger_request_platform),
+#endif
 
 	/* These use the config and can use the test_result */
 	TEST_FW_DEV_ATTR(trigger_batched_requests),

tools/testing/selftests/firmware/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 # Makefile for firmware loading selftests
-
-# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
-all:
+CFLAGS = -Wall \
+         -O2
 
 TEST_PROGS := fw_run_tests.sh
 TEST_FILES := fw_fallback.sh fw_filesystem.sh fw_lib.sh
+TEST_GEN_FILES := fw_namespace
 
 include ../lib.mk
-
-# Nothing to clean up.
-clean:

tools/testing/selftests/firmware/fw_filesystem.sh

@@ -86,6 +86,29 @@ else
 	fi
 fi
 
+# Try platform (EFI embedded fw) loading too
+if [ ! -e "$DIR"/trigger_request_platform ]; then
+	echo "$0: firmware loading: platform trigger not present, ignoring test" >&2
+else
+	if printf '\000' >"$DIR"/trigger_request_platform 2> /dev/null; then
+		echo "$0: empty filename should not succeed (platform)" >&2
+		exit 1
+	fi
+
+	# Note we echo a non-existing name, since files on the file-system
+	# are preferred over firmware embedded inside the platform's firmware
+	# The test adds a fake entry with the requested name to the platform's
+	# fw list, so the name does not matter as long as it does not exist
+	if ! echo -n "nope-$NAME" >"$DIR"/trigger_request_platform ; then
+		echo "$0: could not trigger request platform" >&2
+		exit 1
+	fi
+
+	# The test verifies itself that the loaded firmware contents matches
+	# the contents for the fake platform fw entry it added.
+	echo "$0: platform loading works"
+fi
+
 ### Batched requests tests
 test_config_present()
 {

tools/testing/selftests/firmware/fw_namespace.c

+// SPDX-License-Identifier: GPL-2.0
+/* Test triggering of loading of firmware from different mount
+ * namespaces. Expect firmware to be always loaded from the mount
+ * namespace of PID 1. */
+#define _GNU_SOURCE
+#include <errno.h>
+#include <fcntl.h>
+#include <sched.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mount.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#ifndef CLONE_NEWNS
+# define CLONE_NEWNS 0x00020000
+#endif
+
+static char *fw_path = NULL;
+
+static void die(char *fmt, ...)
+{
+	va_list ap;
+
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	if (fw_path)
+		unlink(fw_path);
+	umount("/lib/firmware");
+	exit(EXIT_FAILURE);
+}
+
+static void trigger_fw(const char *fw_name, const char *sys_path)
+{
+	int fd;
+
+	fd = open(sys_path, O_WRONLY);
+	if (fd < 0)
+		die("open failed: %s\n",
+		    strerror(errno));
+	if (write(fd, fw_name, strlen(fw_name)) != strlen(fw_name))
+		exit(EXIT_FAILURE);
+	close(fd);
+}
+
+static void setup_fw(const char *fw_path)
+{
+	int fd;
+	const char fw[] = "ABCD0123";
+
+	fd = open(fw_path, O_WRONLY | O_CREAT, 0600);
+	if (fd < 0)
+		die("open failed: %s\n",
+		    strerror(errno));
+	if (write(fd, fw, sizeof(fw) -1) != sizeof(fw) -1)
+		die("write failed: %s\n",
+		    strerror(errno));
+	close(fd);
+}
+
+static bool test_fw_in_ns(const char *fw_name, const char *sys_path, bool block_fw_in_parent_ns)
+{
+	pid_t child;
+
+	if (block_fw_in_parent_ns)
+		if (mount("test", "/lib/firmware", "tmpfs", MS_RDONLY, NULL) == -1)
+			die("blocking firmware in parent ns failed\n");
+
+	child = fork();
+	if (child == -1) {
+		die("fork failed: %s\n",
+			strerror(errno));
+	}
+	if (child != 0) { /* parent */
+		pid_t pid;
+		int status;
+
+		pid = waitpid(child, &status, 0);
+		if (pid == -1) {
+			die("waitpid failed: %s\n",
+				strerror(errno));
+		}
+		if (pid != child) {
+			die("waited for %d got %d\n",
+				child, pid);
+		}
+		if (!WIFEXITED(status)) {
+			die("child did not terminate cleanly\n");
+		}
+		if (block_fw_in_parent_ns)
+			umount("/lib/firmware");
+		return WEXITSTATUS(status) == EXIT_SUCCESS ? true : false;
+	}
+
+	if (unshare(CLONE_NEWNS) != 0) {
+		die("unshare(CLONE_NEWNS) failed: %s\n",
+			strerror(errno));
+	}
+	if (mount(NULL, "/", NULL, MS_SLAVE|MS_REC, NULL) == -1)
+		die("remount root in child ns failed\n");
+
+	if (!block_fw_in_parent_ns) {
+		if (mount("test", "/lib/firmware", "tmpfs", MS_RDONLY, NULL) == -1)
+			die("blocking firmware in child ns failed\n");
+	} else
+		umount("/lib/firmware");
+
+	trigger_fw(fw_name, sys_path);
+
+	exit(EXIT_SUCCESS);
+}
+
+int main(int argc, char **argv)
+{
+	const char *fw_name = "test-firmware.bin";
+	char *sys_path;
+	if (argc != 2)
+		die("usage: %s sys_path\n", argv[0]);
+
+	/* Mount tmpfs to /lib/firmware so we don't have to assume
+	   that it is writable for us.*/
+	if (mount("test", "/lib/firmware", "tmpfs", 0, NULL) == -1)
+		die("mounting tmpfs to /lib/firmware failed\n");
+
+	sys_path = argv[1];
+	asprintf(&fw_path, "/lib/firmware/%s", fw_name);
+
+	setup_fw(fw_path);
+
+	setvbuf(stdout, NULL, _IONBF, 0);
+	/* Positive case: firmware in PID1 mount namespace */
+	printf("Testing with firmware in parent namespace (assumed to be same file system as PID1)\n");
+	if (!test_fw_in_ns(fw_name, sys_path, false))
+		die("error: failed to access firmware\n");
+
+	/* Negative case: firmware in child mount namespace, expected to fail */
+	printf("Testing with firmware in child namespace\n");
+	if (test_fw_in_ns(fw_name, sys_path, true))
+		die("error: firmware access did not fail\n");
+
+	unlink(fw_path);
+	free(fw_path);
+	umount("/lib/firmware");
+	exit(EXIT_SUCCESS);
+}

tools/testing/selftests/firmware/fw_run_tests.sh

@@ -61,6 +61,10 @@ run_test_config_0003()
 check_mods
 check_setup
 
+echo "Running namespace test: "
+$TEST_DIR/fw_namespace $DIR/trigger_request
+echo "OK"
+
 if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then
 	run_test_config_0001
 	run_test_config_0002