Commit 59ea2887 authored by Andrzej Hajda's avatar Andrzej Hajda Committed by Jani Nikula

drm/i915/display/misc: use intel_de_rmw if possible

The helper makes the code more compact and readable.
Signed-off-by: default avatarAndrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230110113656.4050491-1-andrzej.hajda@intel.com
parent 8910d8b7
......@@ -136,16 +136,12 @@ static void intel_dp_prepare(struct intel_encoder *encoder,
intel_dp->DP |= DP_PIPE_SEL_IVB(crtc->pipe);
} else if (HAS_PCH_CPT(dev_priv) && port != PORT_A) {
u32 trans_dp;
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
trans_dp = intel_de_read(dev_priv, TRANS_DP_CTL(crtc->pipe));
if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
trans_dp |= TRANS_DP_ENH_FRAMING;
else
trans_dp &= ~TRANS_DP_ENH_FRAMING;
intel_de_write(dev_priv, TRANS_DP_CTL(crtc->pipe), trans_dp);
intel_de_rmw(dev_priv, TRANS_DP_CTL(crtc->pipe),
TRANS_DP_ENH_FRAMING,
drm_dp_enhanced_frame_cap(intel_dp->dpcd) ?
TRANS_DP_ENH_FRAMING : 0);
} else {
if (IS_G4X(dev_priv) && pipe_config->limited_color_range)
intel_dp->DP |= DP_COLOR_RANGE_16_235;
......
......@@ -68,21 +68,15 @@ intel_drrs_set_refresh_rate_pipeconf(struct intel_crtc *crtc,
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum transcoder cpu_transcoder = crtc->drrs.cpu_transcoder;
u32 val, bit;
u32 bit;
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
bit = PIPECONF_REFRESH_RATE_ALT_VLV;
else
bit = PIPECONF_REFRESH_RATE_ALT_ILK;
val = intel_de_read(dev_priv, PIPECONF(cpu_transcoder));
if (refresh_rate == DRRS_REFRESH_RATE_LOW)
val |= bit;
else
val &= ~bit;
intel_de_write(dev_priv, PIPECONF(cpu_transcoder), val);
intel_de_rmw(dev_priv, PIPECONF(cpu_transcoder),
bit, refresh_rate == DRRS_REFRESH_RATE_LOW ? bit : 0);
}
static void
......
......@@ -444,11 +444,8 @@ static bool intel_dvo_init_dev(struct drm_i915_private *dev_priv,
* the clock enabled before we attempt to initialize
* the device.
*/
for_each_pipe(dev_priv, pipe) {
dpll[pipe] = intel_de_read(dev_priv, DPLL(pipe));
intel_de_write(dev_priv, DPLL(pipe),
dpll[pipe] | DPLL_DVO_2X_MODE);
}
for_each_pipe(dev_priv, pipe)
dpll[pipe] = intel_de_rmw(dev_priv, DPLL(pipe), 0, DPLL_DVO_2X_MODE);
ret = dvo->dev_ops->init(&intel_dvo->dev, i2c);
......
......@@ -930,8 +930,7 @@ intel_enable_tv(struct intel_atomic_state *state,
/* Prevents vblank waits from timing out in intel_tv_detect_type() */
intel_crtc_wait_for_next_vblank(to_intel_crtc(pipe_config->uapi.crtc));
intel_de_write(dev_priv, TV_CTL,
intel_de_read(dev_priv, TV_CTL) | TV_ENC_ENABLE);
intel_de_rmw(dev_priv, TV_CTL, 0, TV_ENC_ENABLE);
}
static void
......@@ -943,8 +942,7 @@ intel_disable_tv(struct intel_atomic_state *state,
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
intel_de_write(dev_priv, TV_CTL,
intel_de_read(dev_priv, TV_CTL) & ~TV_ENC_ENABLE);
intel_de_rmw(dev_priv, TV_CTL, TV_ENC_ENABLE, 0);
}
static const struct tv_mode *intel_tv_mode_find(const struct drm_connector_state *conn_state)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment