Commit 5a4b0b85 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Bjorn Andersson

arm64: dts: qcom: correct gpio-keys properties

gpio-keys children do not use unit addresses.
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-22-krzysztof.kozlowski@linaro.org
parent b08f5cbd
......@@ -92,14 +92,12 @@ hdmi_con: endpoint {
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&msm_key_volp_n_default>;
button@0 {
button {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
......
......@@ -84,14 +84,12 @@ div1_mclk: divclk1 {
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&volume_up_gpio>;
button@0 {
button {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
......
......@@ -53,11 +53,9 @@ framebuffer0: framebuffer@3400000 {
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
button@0 {
button {
label = "Volume Up";
gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
......
......@@ -29,11 +29,9 @@ / {
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
button@0 {
button-0 {
label = "Volume Down";
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
......@@ -42,7 +40,7 @@ button@0 {
debounce-interval = <15>;
};
button@1 {
button-1 {
label = "Volume Up";
gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
......@@ -51,7 +49,7 @@ button@1 {
debounce-interval = <15>;
};
button@2 {
button-2 {
label = "Camera Snapshot";
gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
......@@ -60,7 +58,7 @@ button@2 {
debounce-interval = <15>;
};
button@3 {
button-3 {
label = "Camera Focus";
gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
......
......@@ -108,8 +108,6 @@ key-alt {
gpio-keys {
compatible = "gpio-keys";
label = "Side buttons";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
<&cam_snapshot_pin_a>;
......
......@@ -90,8 +90,6 @@ cam_vana_rear_vreg: cam_vana_rear_vreg {
gpio-keys {
status = "okay";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
key-camera-focus {
label = "Camera Focus";
......
......@@ -42,8 +42,6 @@ extcon_usb: extcon-usb {
gpio-keys {
status = "okay";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
key-vol-dn {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment