Commit 5a613d64 authored by Ian Abbott's avatar Ian Abbott Committed by Greg Kroah-Hartman

staging: comedi: usbdux: use attach_usb() hook

Change the usbdux driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Signed-off-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5e9d922f
......@@ -2617,46 +2617,22 @@ static void usbduxsub_disconnect(struct usb_interface *intf)
dev_dbg(&intf->dev, "comedi_: disconnected from the usb\n");
}
/* is called when comedi-config is called */
static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* common part of attach and attach_usb */
static int usbdux_attach_common(struct comedi_device *dev,
struct usbduxsub *udev,
void *aux_data, int aux_len)
{
int ret;
int index;
int i;
struct usbduxsub *udev;
int index = (int)(udev - usbduxsub);
struct comedi_subdevice *s = NULL;
dev->private = NULL;
down(&start_stop_sem);
/* find a valid device which has been detected by the probe function of
* the usb */
index = -1;
for (i = 0; i < NUMUSBDUX; i++) {
if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) {
index = i;
break;
}
}
if (index < 0) {
printk(KERN_ERR "comedi%d: usbdux: error: attach failed, no "
"usbdux devs connected to the usb bus.\n", dev->minor);
up(&start_stop_sem);
return -ENODEV;
}
udev = &usbduxsub[index];
down(&udev->sem);
/* pointer back to the corresponding comedi device */
udev->comedidev = dev;
/* trying to upload the firmware into the chip */
if (comedi_aux_data(it->options, 0) &&
it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) {
firmwareUpload(udev, comedi_aux_data(it->options, 0),
it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
}
if (aux_data)
firmwareUpload(udev, aux_data, aux_len);
dev->board_name = BOARDNAME;
......@@ -2675,7 +2651,6 @@ static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
dev_err(&udev->interface->dev,
"comedi%d: error alloc space for subdev\n", dev->minor);
up(&udev->sem);
up(&start_stop_sem);
return ret;
}
......@@ -2778,14 +2753,80 @@ static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
up(&udev->sem);
up(&start_stop_sem);
dev_info(&udev->interface->dev, "comedi%d: attached to usbdux.\n",
dev->minor);
return 0;
}
/* is called when comedi-config is called */
static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
int ret;
int index;
int i;
void *aux_data;
int aux_len;
dev->private = NULL;
aux_data = comedi_aux_data(it->options, 0);
aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH];
if (aux_data == NULL)
aux_len = 0;
else if (aux_len == 0)
aux_data = NULL;
down(&start_stop_sem);
/* find a valid device which has been detected by the probe function of
* the usb */
index = -1;
for (i = 0; i < NUMUSBDUX; i++) {
if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) {
index = i;
break;
}
}
if (index < 0) {
printk(KERN_ERR
"comedi%d: usbdux: error: attach failed, no usbdux devs connected to the usb bus.\n",
dev->minor);
ret = -ENODEV;
} else
ret = usbdux_attach_common(dev, &usbduxsub[index],
aux_data, aux_len);
up(&start_stop_sem);
return ret;
}
/* is called from comedi_usb_auto_config() */
static int usbdux_attach_usb(struct comedi_device *dev,
struct usb_interface *uinterf)
{
int ret;
struct usbduxsub *this_usbduxsub;
dev->private = NULL;
down(&start_stop_sem);
this_usbduxsub = usb_get_intfdata(uinterf);
if (!this_usbduxsub || !this_usbduxsub->probed) {
printk(KERN_ERR
"comedi%d: usbdux: error: attach_usb failed, not connected\n",
dev->minor);
ret = -ENODEV;
} else if (this_usbduxsub->attached) {
printk(KERN_ERR
"comedi%d: usbdux: error: attach_usb failed, already attached\n",
dev->minor);
ret = -ENODEV;
} else
ret = usbdux_attach_common(dev, this_usbduxsub, NULL, 0);
up(&start_stop_sem);
return ret;
}
static int usbdux_detach(struct comedi_device *dev)
{
struct usbduxsub *usbduxsub_tmp;
......@@ -2824,6 +2865,7 @@ static struct comedi_driver driver_usbdux = {
.module = THIS_MODULE,
.attach = usbdux_attach,
.detach = usbdux_detach,
.attach_usb = usbdux_attach_usb,
};
/* Table with the USB-devices: just now only testing IDs */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment