Commit 5a66088b authored by Roger Quadros's avatar Roger Quadros Committed by Brian Norris

mtd: mtd_oobtest: Show the verification error location and data

Add a function memcmpshow() that compares the 2 data buffers
and shows the address:offset and data bytes on comparison failure.
This function  does not break at a comparison failure but runs the
check for the whole data buffer.

Use memcmpshow() instead of memcmp() for all the verification paths.
Signed-off-by: default avatarRoger Quadros <rogerq@ti.com>
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
parent 09691661
...@@ -115,6 +115,26 @@ static int write_whole_device(void) ...@@ -115,6 +115,26 @@ static int write_whole_device(void)
return 0; return 0;
} }
/* Display the address, offset and data bytes at comparison failure */
static int memcmpshow(loff_t addr, const void *cs, const void *ct, size_t count)
{
const unsigned char *su1, *su2;
int res;
int ret = 0;
size_t i = 0;
for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--, i++) {
res = *su1 ^ *su2;
if (res) {
pr_info("error @addr[0x%lx:0x%x] 0x%x -> 0x%x diff 0x%x\n",
(unsigned long)addr, i, *su1, *su2, res);
ret = 1;
}
}
return ret;
}
static int verify_eraseblock(int ebnum) static int verify_eraseblock(int ebnum)
{ {
int i; int i;
...@@ -139,8 +159,9 @@ static int verify_eraseblock(int ebnum) ...@@ -139,8 +159,9 @@ static int verify_eraseblock(int ebnum)
errcnt += 1; errcnt += 1;
return err ? err : -1; return err ? err : -1;
} }
if (memcmp(readbuf, writebuf + (use_len_max * i) + use_offset, if (memcmpshow(addr, readbuf,
use_len)) { writebuf + (use_len_max * i) + use_offset,
use_len)) {
pr_err("error: verify failed at %#llx\n", pr_err("error: verify failed at %#llx\n",
(long long)addr); (long long)addr);
errcnt += 1; errcnt += 1;
...@@ -167,9 +188,9 @@ static int verify_eraseblock(int ebnum) ...@@ -167,9 +188,9 @@ static int verify_eraseblock(int ebnum)
errcnt += 1; errcnt += 1;
return err ? err : -1; return err ? err : -1;
} }
if (memcmp(readbuf + use_offset, if (memcmpshow(addr, readbuf + use_offset,
writebuf + (use_len_max * i) + use_offset, writebuf + (use_len_max * i) + use_offset,
use_len)) { use_len)) {
pr_err("error: verify failed at %#llx\n", pr_err("error: verify failed at %#llx\n",
(long long)addr); (long long)addr);
errcnt += 1; errcnt += 1;
...@@ -233,7 +254,7 @@ static int verify_eraseblock_in_one_go(int ebnum) ...@@ -233,7 +254,7 @@ static int verify_eraseblock_in_one_go(int ebnum)
errcnt += 1; errcnt += 1;
return err ? err : -1; return err ? err : -1;
} }
if (memcmp(readbuf, writebuf, len)) { if (memcmpshow(addr, readbuf, writebuf, len)) {
pr_err("error: verify failed at %#llx\n", pr_err("error: verify failed at %#llx\n",
(long long)addr); (long long)addr);
errcnt += 1; errcnt += 1;
...@@ -610,7 +631,8 @@ static int __init mtd_oobtest_init(void) ...@@ -610,7 +631,8 @@ static int __init mtd_oobtest_init(void)
err = mtd_read_oob(mtd, addr, &ops); err = mtd_read_oob(mtd, addr, &ops);
if (err) if (err)
goto out; goto out;
if (memcmp(readbuf, writebuf, mtd->ecclayout->oobavail * 2)) { if (memcmpshow(addr, readbuf, writebuf,
mtd->ecclayout->oobavail * 2)) {
pr_err("error: verify failed at %#llx\n", pr_err("error: verify failed at %#llx\n",
(long long)addr); (long long)addr);
errcnt += 1; errcnt += 1;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment