net: bcmgenet: fix RGMII_MODE_EN bit

RGMII_MODE_EN bit was defined to 0, while it is actually 6. It was not
much of a problem on older designs where this was a no-op, and the RGMII
data-path would always be enabled, but newer GENET controllers need to
explicitely enable their RGMII data-pad using this bit.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/genet/bcmgenet.h

@@ -331,9 +331,9 @@ struct bcmgenet_mib_counters {
 #define  EXT_ENERGY_DET_MASK		(1 << 12)
 
 #define EXT_RGMII_OOB_CTRL		0x0C
-#define  RGMII_MODE_EN			(1 << 0)
 #define  RGMII_LINK			(1 << 4)
 #define  OOB_DISABLE			(1 << 5)
+#define  RGMII_MODE_EN			(1 << 6)
 #define  ID_MODE_DIS			(1 << 16)
 
 #define EXT_GPHY_CTRL			0x1C