Commit 5b6b0ad6 authored by Sascha Hauer's avatar Sascha Hauer Committed by Chris Ball

mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5

On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the
SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION
command. This works for SD cards. However, with MMC cards
the MMC_SET_BLOCK_COUNT command is used instead, but this
needs the same handling. Fix MMC cards by testing for the
MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53
board with a Transcend MMC+ card and eMMC.

The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this
is a regression for these boards introduced in 3.0; it should
go to 3.0/3.1/3.2-stable.
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Acked-by: default avatarShawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent c84f15ae
...@@ -269,8 +269,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) ...@@ -269,8 +269,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
imx_data->scratchpad = val; imx_data->scratchpad = val;
return; return;
case SDHCI_COMMAND: case SDHCI_COMMAND:
if ((host->cmd->opcode == MMC_STOP_TRANSMISSION) if ((host->cmd->opcode == MMC_STOP_TRANSMISSION ||
&& (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
(imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
val |= SDHCI_CMD_ABORTCMD; val |= SDHCI_CMD_ABORTCMD;
if (is_imx6q_usdhc(imx_data)) { if (is_imx6q_usdhc(imx_data)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment