MIPS: ingenic: Initial JZ4780 support

Support the Ingenic JZ4780 SoC using the existing code under
arch/mips/jz4740 now that it has been generalised sufficiently.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/10164/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/boot/dts/ingenic/jz4780.dtsi

+#include <dt-bindings/clock/jz4780-cgu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,jz4780";
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,jz4780-intc";
+		reg = <0x10001000 0x50>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	rtc: rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: jz4780-cgu@10000000 {
+		compatible = "ingenic,jz4780-cgu";
+		reg = <0x10000000 0x100>;
+
+		clocks = <&ext>, <&rtc>;
+		clock-names = "ext", "rtc";
+
+		#clock-cells = <1>;
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,jz4780-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>;
+
+		clocks = <&ext>, <&cgu JZ4780_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,jz4780-uart";
+		reg = <0x10031000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <50>;
+
+		clocks = <&ext>, <&cgu JZ4780_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart2: serial@10032000 {
+		compatible = "ingenic,jz4780-uart";
+		reg = <0x10032000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <49>;
+
+		clocks = <&ext>, <&cgu JZ4780_CLK_UART2>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart3: serial@10033000 {
+		compatible = "ingenic,jz4780-uart";
+		reg = <0x10033000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <48>;
+
+		clocks = <&ext>, <&cgu JZ4780_CLK_UART3>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart4: serial@10034000 {
+		compatible = "ingenic,jz4780-uart";
+		reg = <0x10034000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <34>;
+
+		clocks = <&ext>, <&cgu JZ4780_CLK_UART4>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+};

arch/mips/include/asm/cpu-type.h

@@ -32,12 +32,12 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_4KC:
 	case CPU_ALCHEMY:
 	case CPU_PR4450:
-	case CPU_JZRISC:
 #endif
 
 #if defined(CONFIG_SYS_HAS_CPU_MIPS32_R1) || \
     defined(CONFIG_SYS_HAS_CPU_MIPS32_R2)
 	case CPU_4KEC:
+	case CPU_JZRISC:
 #endif
 
 #ifdef CONFIG_SYS_HAS_CPU_MIPS32_R2

arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h

@@ -12,8 +12,6 @@
 #define cpu_has_3k_cache	0
 #define cpu_has_4k_cache	1
 #define cpu_has_tx39_cache	0
-#define cpu_has_fpu		0
-#define cpu_has_32fpr	0
 #define cpu_has_counter		0
 #define cpu_has_watch		1
 #define cpu_has_divec		1
@@ -34,7 +32,6 @@
 #define cpu_has_ic_fills_f_dc	0
 #define cpu_has_pindexed_dcache 0
 #define cpu_has_mips32r1	1
-#define cpu_has_mips32r2	0
 #define cpu_has_mips64r1	0
 #define cpu_has_mips64r2	0
 #define cpu_has_dsp		0

arch/mips/include/asm/mach-jz4740/irq.h

@@ -21,6 +21,8 @@
 
 #ifdef CONFIG_MACH_JZ4740
 # define NR_INTC_IRQS	32
+#else
+# define NR_INTC_IRQS	64
 #endif
 
 /* 1st-level interrupts */
@@ -48,6 +50,8 @@
 #define JZ4740_IRQ_IPU		JZ4740_IRQ(29)
 #define JZ4740_IRQ_LCD		JZ4740_IRQ(30)
 
+#define JZ4780_IRQ_TCU2		JZ4740_IRQ(25)
+
 /* 2nd-level interrupts */
 #define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(NR_INTC_IRQS) + (x))
 

arch/mips/jz4740/Kconfig

@@ -12,3 +12,9 @@ endchoice
 config MACH_JZ4740
 	bool
 	select SYS_HAS_CPU_MIPS32_R1
+
+config MACH_JZ4780
+	bool
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_HIGHMEM

arch/mips/jz4740/Makefile

@@ -5,7 +5,9 @@
 # Object file lists.
 
 obj-y += prom.o time.o reset.o setup.o \
-	gpio.o platform.o timer.o
+	platform.o timer.o
+
+obj-$(CONFIG_MACH_JZ4740) += gpio.o
 
 CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
 

arch/mips/jz4740/setup.c

@@ -83,6 +83,9 @@ arch_initcall(populate_machine);
 
 const char *get_system_type(void)
 {
+	if (config_enabled(CONFIG_MACH_JZ4780))
+		return "JZ4780";
+
 	return "JZ4740";
 }
 

arch/mips/jz4740/time.c

@@ -102,7 +102,12 @@ static struct clock_event_device jz4740_clockevent = {
 	.set_next_event = jz4740_clockevent_set_next,
 	.set_mode = jz4740_clockevent_set_mode,
 	.rating = 200,
+#ifdef CONFIG_MACH_JZ4740
 	.irq = JZ4740_IRQ_TCU0,
+#endif
+#ifdef CONFIG_MACH_JZ4780
+	.irq = JZ4780_IRQ_TCU2,
+#endif
 };
 
 static struct irqaction timer_irqaction = {
@@ -144,7 +149,7 @@ void __init plat_time_init(void)
 
 	sched_clock_register(jz4740_read_sched_clock, 16, clk_rate);
 
-	setup_irq(JZ4740_IRQ_TCU0, &timer_irqaction);
+	setup_irq(jz4740_clockevent.irq, &timer_irqaction);
 
 	ctrl = JZ_TIMER_CTRL_PRESCALE_16 | JZ_TIMER_CTRL_SRC_EXT;