Commit 5c31252c authored by Boris Brezillon's avatar Boris Brezillon Committed by Thierry Reding

pwm: Add the pwm_is_enabled() helper

Some PWM drivers are testing the PWMF_ENABLED flag. Create a helper
function to hide the logic behind enabled test. This will allow us to
smoothly move from the current approach to an atomic PWM update
approach.
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: default avatarThierry Reding <thierry.reding@gmail.com>
parent d770e558
......@@ -455,7 +455,7 @@ int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
if (!pwm->chip->ops->set_polarity)
return -ENOSYS;
if (test_bit(PWMF_ENABLED, &pwm->flags))
if (pwm_is_enabled(pwm))
return -EBUSY;
err = pwm->chip->ops->set_polarity(pwm->chip, pwm, polarity);
......@@ -853,7 +853,7 @@ static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
if (test_bit(PWMF_REQUESTED, &pwm->flags))
seq_puts(s, " requested");
if (test_bit(PWMF_ENABLED, &pwm->flags))
if (pwm_is_enabled(pwm))
seq_puts(s, " enabled");
seq_puts(s, "\n");
......
......@@ -347,7 +347,7 @@ static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
tcbpwm->duty = duty;
/* If the PWM is enabled, call enable to apply the new conf */
if (test_bit(PWMF_ENABLED, &pwm->flags))
if (pwm_is_enabled(pwm))
atmel_tcb_pwm_enable(chip, pwm);
return 0;
......
......@@ -114,7 +114,7 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
u32 val;
int ret;
if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) {
if (pwm_is_enabled(pwm) && (period_ns != pwm->period)) {
dev_err(chip->dev, "cannot change PWM period while enabled\n");
return -EBUSY;
}
......@@ -176,7 +176,7 @@ static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm,
* If the PWM channel is enabled, only update CDTY by using the update
* register, it needs to set bit 10 of CMR to 0
*/
if (test_bit(PWMF_ENABLED, &pwm->flags))
if (pwm_is_enabled(pwm))
return;
/*
* If the PWM channel is disabled, write value to duty and period
......@@ -191,7 +191,7 @@ static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm,
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
if (pwm_is_enabled(pwm)) {
/*
* If the PWM channel is enabled, using the duty update register
* to update the value.
......
......@@ -134,7 +134,7 @@ static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm,
}
/* If the PWM channel is enabled, write the settings to the HW */
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
if (pwm_is_enabled(pwm)) {
value = readl(kp->base + PRESCALE_OFFSET);
value &= ~PRESCALE_MASK(chan);
value |= prescale << PRESCALE_SHIFT(chan);
......@@ -287,7 +287,7 @@ static int kona_pwmc_remove(struct platform_device *pdev)
unsigned int chan;
for (chan = 0; chan < kp->chip.npwm; chan++)
if (test_bit(PWMF_ENABLED, &kp->chip.pwms[chan].flags))
if (pwm_is_enabled(&kp->chip.pwms[chan]))
clk_disable_unprepare(kp->clk);
return pwmchip_remove(&kp->chip);
......
......@@ -82,7 +82,7 @@ static int ep93xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
* The clock needs to be enabled to access the PWM registers.
* Configuration can be changed at any time.
*/
if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
if (!pwm_is_enabled(pwm)) {
ret = clk_enable(ep93xx_pwm->clk);
if (ret)
return ret;
......@@ -113,7 +113,7 @@ static int ep93xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
ret = -EINVAL;
}
if (!test_bit(PWMF_ENABLED, &pwm->flags))
if (!pwm_is_enabled(pwm))
clk_disable(ep93xx_pwm->clk);
return ret;
......
......@@ -114,7 +114,7 @@ static int imx_pwm_config_v2(struct pwm_chip *chip,
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
unsigned int period_ms;
bool enable = test_bit(PWMF_ENABLED, &pwm->flags);
bool enable = pwm_is_enabled(pwm);
int wait_count = 0, fifoav;
u32 cr, sr;
......
......@@ -77,7 +77,7 @@ static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
* If the PWM channel is disabled, make sure to turn on the clock
* before writing the register. Otherwise, keep it enabled.
*/
if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
if (!pwm_is_enabled(pwm)) {
ret = clk_prepare_enable(mxs->clk);
if (ret)
return ret;
......@@ -92,7 +92,7 @@ static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
/*
* If the PWM is not enabled, turn the clock off again to save power.
*/
if (!test_bit(PWMF_ENABLED, &pwm->flags))
if (!pwm_is_enabled(pwm))
clk_disable_unprepare(mxs->clk);
return 0;
......
......@@ -301,7 +301,7 @@ static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *_pwm,
pwm->duty = duty;
/* If the channel is disabled we're done. */
if (!test_bit(PWMF_ENABLED, &_pwm->flags))
if (!pwm_is_enabled(_pwm))
return 0;
if (duty_only && pwm->timer_on) {
......
......@@ -112,7 +112,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
* If the PWM channel is disabled, make sure to turn on the clock
* before writing the register. Otherwise, keep it enabled.
*/
if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
if (!pwm_is_enabled(pwm)) {
err = clk_prepare_enable(pc->clk);
if (err < 0)
return err;
......@@ -124,7 +124,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
/*
* If the PWM is not enabled, turn the clock off again to save power.
*/
if (!test_bit(PWMF_ENABLED, &pwm->flags))
if (!pwm_is_enabled(pwm))
clk_disable_unprepare(pc->clk);
return 0;
......@@ -214,7 +214,7 @@ static int tegra_pwm_remove(struct platform_device *pdev)
for (i = 0; i < NUM_PWM; i++) {
struct pwm_device *pwm = &pc->chip.pwms[i];
if (!test_bit(PWMF_ENABLED, &pwm->flags))
if (!pwm_is_enabled(pwm))
if (clk_prepare_enable(pc->clk) < 0)
continue;
......
......@@ -97,7 +97,7 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
writew(reg_val, pc->mmio_base + ECCTL2);
if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
if (!pwm_is_enabled(pwm)) {
/* Update active registers if not running */
writel(duty_cycles, pc->mmio_base + CAP2);
writel(period_cycles, pc->mmio_base + CAP1);
......@@ -111,7 +111,7 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
writel(period_cycles, pc->mmio_base + CAP3);
}
if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
if (!pwm_is_enabled(pwm)) {
reg_val = readw(pc->mmio_base + ECCTL2);
/* Disable APWM mode to put APWM output Low */
reg_val &= ~ECCTL2_APWM_MODE;
......@@ -179,7 +179,7 @@ static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
if (pwm_is_enabled(pwm)) {
dev_warn(chip->dev, "Removing PWM device without disabling\n");
pm_runtime_put_sync(chip->dev);
}
......@@ -306,7 +306,7 @@ static int ecap_pwm_suspend(struct device *dev)
ecap_pwm_save_context(pc);
/* Disable explicitly if PWM is running */
if (test_bit(PWMF_ENABLED, &pwm->flags))
if (pwm_is_enabled(pwm))
pm_runtime_put_sync(dev);
return 0;
......@@ -318,7 +318,7 @@ static int ecap_pwm_resume(struct device *dev)
struct pwm_device *pwm = pc->chip.pwms;
/* Enable explicitly if PWM was running */
if (test_bit(PWMF_ENABLED, &pwm->flags))
if (pwm_is_enabled(pwm))
pm_runtime_get_sync(dev);
ecap_pwm_restore_context(pc);
......
......@@ -407,7 +407,7 @@ static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
if (pwm_is_enabled(pwm)) {
dev_warn(chip->dev, "Removing PWM device without disabling\n");
pm_runtime_put_sync(chip->dev);
}
......@@ -565,7 +565,7 @@ static int ehrpwm_pwm_suspend(struct device *dev)
for (i = 0; i < pc->chip.npwm; i++) {
struct pwm_device *pwm = &pc->chip.pwms[i];
if (!test_bit(PWMF_ENABLED, &pwm->flags))
if (!pwm_is_enabled(pwm))
continue;
/* Disable explicitly if PWM is running */
......@@ -582,7 +582,7 @@ static int ehrpwm_pwm_resume(struct device *dev)
for (i = 0; i < pc->chip.npwm; i++) {
struct pwm_device *pwm = &pc->chip.pwms[i];
if (!test_bit(PWMF_ENABLED, &pwm->flags))
if (!pwm_is_enabled(pwm))
continue;
/* Enable explicitly if PWM was running */
......
......@@ -97,7 +97,7 @@ static ssize_t pwm_enable_show(struct device *child,
char *buf)
{
const struct pwm_device *pwm = child_to_pwm_device(child);
int enabled = test_bit(PWMF_ENABLED, &pwm->flags);
int enabled = pwm_is_enabled(pwm);
return sprintf(buf, "%d\n", enabled);
}
......
......@@ -92,6 +92,11 @@ struct pwm_device {
enum pwm_polarity polarity;
};
static inline bool pwm_is_enabled(const struct pwm_device *pwm)
{
return test_bit(PWMF_ENABLED, &pwm->flags);
}
static inline void pwm_set_period(struct pwm_device *pwm, unsigned int period)
{
if (pwm)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment