Merge branch 'mscc-RGMII'

Antoine Tenart says:

====================
net: phy: mscc: add support for RGMII MAC mode

This series adds support for the RGMII MAC mode for the VSC8584 PHY
family and for RGMII_ID modes (Tx and/or Rx).

I decided to drop the custom delay for now. I made some tests and it
seemed to be working quite well. If we find out we really need to lower
the delay, which I doubt, I'll send support for it.

Since v2:
  - Dropped support for custom dt bindings.
  - Add the 2ns delay based on the interface mode.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/mscc/mscc.h

@@ -161,6 +161,20 @@ enum rgmii_rx_clock_delay {
 /* Extended Page 2 Registers */
 #define MSCC_PHY_CU_PMD_TX_CNTL		  16
 
+#define MSCC_PHY_RGMII_SETTINGS		  18
+#define RGMII_SKEW_RX_POS		  1
+#define RGMII_SKEW_TX_POS		  4
+
+/* RGMII skew values, in ns */
+#define VSC8584_RGMII_SKEW_0_2		  0
+#define VSC8584_RGMII_SKEW_0_8		  1
+#define VSC8584_RGMII_SKEW_1_1		  2
+#define VSC8584_RGMII_SKEW_1_7		  3
+#define VSC8584_RGMII_SKEW_2_0		  4
+#define VSC8584_RGMII_SKEW_2_3		  5
+#define VSC8584_RGMII_SKEW_2_6		  6
+#define VSC8584_RGMII_SKEW_3_4		  7
+
 #define MSCC_PHY_RGMII_CNTL		  20
 #define RGMII_RX_CLK_DELAY_MASK		  0x0070
 #define RGMII_RX_CLK_DELAY_POS		  4
@@ -241,6 +255,7 @@ enum rgmii_rx_clock_delay {
 #define MAC_CFG_MASK			  0xc000
 #define MAC_CFG_SGMII			  0x0000
 #define MAC_CFG_QSGMII			  0x4000
+#define MAC_CFG_RGMII			  0x8000
 
 /* Test page Registers */
 #define MSCC_PHY_TEST_PAGE_5		  5

drivers/net/phy/mscc/mscc_main.c

@@ -1288,6 +1288,32 @@ static bool vsc8584_is_pkg_init(struct phy_device *phydev, bool reversed)
 	return false;
 }
 
+static void vsc8584_rgmii_set_skews(struct phy_device *phydev)
+{
+	u32 skew_rx, skew_tx;
+
+	/* We first set the Rx and Tx skews to their default value in h/w
+	 * (0.2 ns).
+	 */
+	skew_rx = VSC8584_RGMII_SKEW_0_2;
+	skew_tx = VSC8584_RGMII_SKEW_0_2;
+
+	/* We then set the skews based on the interface mode. */
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+		skew_rx = VSC8584_RGMII_SKEW_2_0;
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+		skew_tx = VSC8584_RGMII_SKEW_2_0;
+
+	/* Finally we apply the skews configuration. */
+	phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2,
+			 MSCC_PHY_RGMII_SETTINGS,
+			 (0x7 << RGMII_SKEW_RX_POS) | (0x7 << RGMII_SKEW_TX_POS),
+			 (skew_rx << RGMII_SKEW_RX_POS) |
+			 (skew_tx << RGMII_SKEW_TX_POS));
+}
+
 static int vsc8584_config_init(struct phy_device *phydev)
 {
 	struct vsc8531_private *vsc8531 = phydev->priv;
@@ -1360,27 +1386,35 @@ static int vsc8584_config_init(struct phy_device *phydev)
 
 	val = phy_base_read(phydev, MSCC_PHY_MAC_CFG_FASTLINK);
 	val &= ~MAC_CFG_MASK;
-	if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
+	if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
 		val |= MAC_CFG_QSGMII;
-	else
+	} else if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
 		val |= MAC_CFG_SGMII;
+	} else if (phy_interface_is_rgmii(phydev)) {
+		val |= MAC_CFG_RGMII;
+	} else {
+		ret = -EINVAL;
+		goto err;
+	}
 
 	ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val);
 	if (ret)
 		goto err;
 
-	val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT |
-		PROC_CMD_READ_MOD_WRITE_PORT;
-	if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
-		val |= PROC_CMD_QSGMII_MAC;
-	else
-		val |= PROC_CMD_SGMII_MAC;
+	if (!phy_interface_is_rgmii(phydev)) {
+		val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT |
+			PROC_CMD_READ_MOD_WRITE_PORT;
+		if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
+			val |= PROC_CMD_QSGMII_MAC;
+		else
+			val |= PROC_CMD_SGMII_MAC;
 
-	ret = vsc8584_cmd(phydev, val);
-	if (ret)
-		goto err;
+		ret = vsc8584_cmd(phydev, val);
+		if (ret)
+			goto err;
 
-	usleep_range(10000, 20000);
+		usleep_range(10000, 20000);
+	}
 
 	/* Disable SerDes for 100Base-FX */
 	ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF |
@@ -1414,6 +1448,9 @@ static int vsc8584_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
+	if (phy_interface_is_rgmii(phydev))
+		vsc8584_rgmii_set_skews(phydev);
+
 	ret = genphy_soft_reset(phydev);
 	if (ret)
 		return ret;