Commit 5cd7327e authored by James Bottomley's avatar James Bottomley Committed by James Bottomley

SCSI: remove qlogicfc driver

The qla2xxx drivers take its place
parent 46463c4f
......@@ -1172,23 +1172,6 @@ config SCSI_QLOGIC_ISP
To compile this driver as a module, choose M here: the
module will be called qlogicisp.
config SCSI_QLOGIC_FC
tristate "Qlogic ISP FC SCSI support"
depends on PCI && SCSI
help
This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
To compile this driver as a module, choose M here: the
module will be called qlogicfc.
config SCSI_QLOGIC_FC_FIRMWARE
bool "Include loadable firmware in driver"
depends on SCSI_QLOGIC_FC
help
Say Y to include ISP2X00 Fabric Initiator/Target Firmware, with
expanded LUN addressing and FcTape (FCP-2) support, in the
qlogicfc driver. This is required on some platforms.
config SCSI_QLOGIC_1280
tristate "Qlogic QLA 1280 SCSI support"
depends on PCI && SCSI
......
......@@ -69,7 +69,6 @@ obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
obj-$(CONFIG_SCSI_SYM53C416) += sym53c416.o
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas.o
obj-$(CONFIG_SCSI_QLOGIC_ISP) += qlogicisp.o
obj-$(CONFIG_SCSI_QLOGIC_FC) += qlogicfc.o
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
obj-$(CONFIG_SCSI_QLA2XXX) += qla2xxx/
obj-$(CONFIG_SCSI_PAS16) += pas16.o
......
This diff is collapsed.
/*
* QLogic ISP2x00 SCSI-FCP
*
* Written by Erik H. Moe, ehm@cris.com
* Copyright 1995, Erik H. Moe
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
/* Renamed and updated to 1.3.x by Michael Griffith <grif@cs.ucr.edu> */
/* This is a version of the isp1020 driver which was modified by
* Chris Loveland <cwl@iol.unh.edu> to support the isp2x00
*/
/*
* $Date: 1995/09/22 02:32:56 $
* $Revision: 0.5 $
*
* $Log: isp1020.h,v $
* Revision 0.5 1995/09/22 02:32:56 root
* do auto request sense
*
* Revision 0.4 1995/08/07 04:48:28 root
* supply firmware with driver.
* numerous bug fixes/general cleanup of code.
*
* Revision 0.3 1995/07/16 16:17:16 root
* added reset/abort code.
*
* Revision 0.2 1995/06/29 03:19:43 root
* fixed biosparam.
* added queue protocol.
*
* Revision 0.1 1995/06/25 01:56:13 root
* Initial release.
*
*/
#ifndef _QLOGICFC_H
#define _QLOGICFC_H
/*
* With the qlogic interface, every queue slot can hold a SCSI
* command with up to 2 scatter/gather entries. If we need more
* than 2 entries, continuation entries can be used that hold
* another 5 entries each. Unlike for other drivers, this means
* that the maximum number of scatter/gather entries we can
* support at any given time is a function of the number of queue
* slots available. That is, host->can_queue and host->sg_tablesize
* are dynamic and _not_ independent. This all works fine because
* requests are queued serially and the scatter/gather limit is
* determined for each queue request anew.
*/
#define DATASEGS_PER_COMMAND 2
#define DATASEGS_PER_CONT 5
#define QLOGICFC_REQ_QUEUE_LEN 255 /* must be power of two - 1 */
#define QLOGICFC_MAX_SG(ql) (DATASEGS_PER_COMMAND + (((ql) > 0) ? DATASEGS_PER_CONT*((ql) - 1) : 0))
#define QLOGICFC_CMD_PER_LUN 8
int isp2x00_detect(Scsi_Host_Template *);
int isp2x00_release(struct Scsi_Host *);
const char * isp2x00_info(struct Scsi_Host *);
int isp2x00_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
int isp2x00_abort(Scsi_Cmnd *);
int isp2x00_reset(Scsi_Cmnd *, unsigned int);
int isp2x00_biosparam(struct scsi_device *, struct block_device *,
sector_t, int[]);
#endif /* _QLOGICFC_H */
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment