Commit 5d24f455 authored by Joe Burmeister's avatar Joe Burmeister Committed by Greg Kroah-Hartman

tty: max310x: Fix external crystal register setup

The datasheet states:

  Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking
(crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable
clocking
  Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal
oscillator. When using an external clock source at XIN, CrystalEn must
be set low.

The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not.

This was required to make the MAX3107 with an external crystal on our
board able to send or receive data.
Signed-off-by: default avatarJoe Burmeister <joe.burmeister@devtank.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 099506cb
......@@ -581,7 +581,7 @@ static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
}
/* Configure clock source */
clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT;
clksrc = MAX310X_CLKSRC_EXTCLK_BIT | (xtal ? MAX310X_CLKSRC_CRYST_BIT : 0);
/* Configure PLL */
if (pllcfg) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment