Commit 5d5b1b9f authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/powermac: Build fix with SMP and CPU hotplug
  powerpc/perf_event: Skip updating kernel counters if register value shrinks
  powerpc: Don't write protect kernel text with CONFIG_DYNAMIC_FTRACE enabled
  powerpc: Fix oops if scan_dispatch_log is called too early
  powerpc/pseries: Use a kmem cache for DTL buffers
  powerpc/kexec: Fix regression causing compile failure on UP
  powerpc/85xx: disable Suspend support if SMP enabled
  powerpc/e500mc: Remove CPU_FTR_MAYBE_CAN_NAP/CPU_FTR_MAYBE_CAN_DOZE
  powerpc/book3e: Fix CPU feature handling on 64-bit e5500
  powerpc: Check device status before adding serial device
  powerpc/85xx: Don't add disabled PCIe devices
parents adff377b 7b84b29b
......@@ -209,7 +209,7 @@ config ARCH_HIBERNATION_POSSIBLE
config ARCH_SUSPEND_POSSIBLE
def_bool y
depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
PPC_85xx || PPC_86xx || PPC_PSERIES || 44x || 40x
(PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x
config PPC_DCR_NATIVE
bool
......
......@@ -382,10 +382,12 @@ extern const char *powerpc_base_platform;
#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | \
CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \
#define CPU_FTRS_E500MC (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
CPU_FTR_DBELL)
#define CPU_FTRS_E5500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
......@@ -435,11 +437,15 @@ extern const char *powerpc_base_platform;
#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
#define CPU_FTRS_POSSIBLE (CPU_FTRS_E5500)
#else
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \
CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \
CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
#endif
#else
enum {
CPU_FTRS_POSSIBLE =
......@@ -473,16 +479,21 @@ enum {
#endif
#ifdef CONFIG_E500
CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
CPU_FTRS_E5500 |
#endif
0,
};
#endif /* __powerpc64__ */
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
#define CPU_FTRS_ALWAYS (CPU_FTRS_E5500)
#else
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \
CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
#endif
#else
enum {
CPU_FTRS_ALWAYS =
......@@ -513,6 +524,7 @@ enum {
#endif
#ifdef CONFIG_E500
CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
CPU_FTRS_E5500 &
#endif
CPU_FTRS_POSSIBLE,
};
......
......@@ -162,7 +162,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
* on platforms where such control is possible.
*/
#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
defined(CONFIG_KPROBES)
defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE)
#define PAGE_KERNEL_TEXT PAGE_KERNEL_X
#else
#define PAGE_KERNEL_TEXT PAGE_KERNEL_ROX
......
......@@ -1973,7 +1973,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.pvr_mask = 0xffff0000,
.pvr_value = 0x80240000,
.cpu_name = "e5500",
.cpu_features = CPU_FTRS_E500MC,
.cpu_features = CPU_FTRS_E5500,
.cpu_user_features = COMMON_USER_BOOKE,
.mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
MMU_FTR_USE_TLBILX,
......
......@@ -163,7 +163,7 @@ static void crash_kexec_prepare_cpus(int cpu)
}
/* wait for all the CPUs to hit real mode but timeout if they don't come in */
#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP)
#ifdef CONFIG_PPC_STD_MMU_64
static void crash_kexec_wait_realmode(int cpu)
{
unsigned int msecs;
......@@ -188,9 +188,7 @@ static void crash_kexec_wait_realmode(int cpu)
}
mb();
}
#else
static inline void crash_kexec_wait_realmode(int cpu) {}
#endif
#endif /* CONFIG_PPC_STD_MMU_64 */
/*
* This function will be called by secondary cpus or by kexec cpu
......@@ -235,7 +233,9 @@ void crash_kexec_secondary(struct pt_regs *regs)
crash_ipi_callback(regs);
}
#else
#else /* ! CONFIG_SMP */
static inline void crash_kexec_wait_realmode(int cpu) {}
static void crash_kexec_prepare_cpus(int cpu)
{
/*
......@@ -255,7 +255,7 @@ void crash_kexec_secondary(struct pt_regs *regs)
{
cpus_in_sr = CPU_MASK_NONE;
}
#endif
#endif /* CONFIG_SMP */
/*
* Register a function to be called on shutdown. Only use this if you
......
......@@ -330,9 +330,11 @@ void __init find_legacy_serial_ports(void)
if (!parent)
continue;
if (of_match_node(legacy_serial_parents, parent) != NULL) {
index = add_legacy_soc_port(np, np);
if (index >= 0 && np == stdout)
legacy_serial_console = index;
if (of_device_is_available(np)) {
index = add_legacy_soc_port(np, np);
if (index >= 0 && np == stdout)
legacy_serial_console = index;
}
}
of_node_put(parent);
}
......
......@@ -398,6 +398,25 @@ static int check_excludes(struct perf_event **ctrs, unsigned int cflags[],
return 0;
}
static u64 check_and_compute_delta(u64 prev, u64 val)
{
u64 delta = (val - prev) & 0xfffffffful;
/*
* POWER7 can roll back counter values, if the new value is smaller
* than the previous value it will cause the delta and the counter to
* have bogus values unless we rolled a counter over. If a coutner is
* rolled back, it will be smaller, but within 256, which is the maximum
* number of events to rollback at once. If we dectect a rollback
* return 0. This can lead to a small lack of precision in the
* counters.
*/
if (prev > val && (prev - val) < 256)
delta = 0;
return delta;
}
static void power_pmu_read(struct perf_event *event)
{
s64 val, delta, prev;
......@@ -416,10 +435,11 @@ static void power_pmu_read(struct perf_event *event)
prev = local64_read(&event->hw.prev_count);
barrier();
val = read_pmc(event->hw.idx);
delta = check_and_compute_delta(prev, val);
if (!delta)
return;
} while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
/* The counters are only 32 bits wide */
delta = (val - prev) & 0xfffffffful;
local64_add(delta, &event->count);
local64_sub(delta, &event->hw.period_left);
}
......@@ -449,8 +469,9 @@ static void freeze_limited_counters(struct cpu_hw_events *cpuhw,
val = (event->hw.idx == 5) ? pmc5 : pmc6;
prev = local64_read(&event->hw.prev_count);
event->hw.idx = 0;
delta = (val - prev) & 0xfffffffful;
local64_add(delta, &event->count);
delta = check_and_compute_delta(prev, val);
if (delta)
local64_add(delta, &event->count);
}
}
......@@ -458,14 +479,16 @@ static void thaw_limited_counters(struct cpu_hw_events *cpuhw,
unsigned long pmc5, unsigned long pmc6)
{
struct perf_event *event;
u64 val;
u64 val, prev;
int i;
for (i = 0; i < cpuhw->n_limited; ++i) {
event = cpuhw->limited_counter[i];
event->hw.idx = cpuhw->limited_hwidx[i];
val = (event->hw.idx == 5) ? pmc5 : pmc6;
local64_set(&event->hw.prev_count, val);
prev = local64_read(&event->hw.prev_count);
if (check_and_compute_delta(prev, val))
local64_set(&event->hw.prev_count, val);
perf_event_update_userpage(event);
}
}
......@@ -1197,7 +1220,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
/* we don't have to worry about interrupts here */
prev = local64_read(&event->hw.prev_count);
delta = (val - prev) & 0xfffffffful;
delta = check_and_compute_delta(prev, val);
local64_add(delta, &event->count);
/*
......
......@@ -229,6 +229,9 @@ static u64 scan_dispatch_log(u64 stop_tb)
u64 stolen = 0;
u64 dtb;
if (!dtl)
return 0;
if (i == vpa->dtl_idx)
return 0;
while (i < vpa->dtl_idx) {
......
......@@ -842,6 +842,7 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
mpic_setup_this_cpu();
}
#ifdef CONFIG_PPC64
#ifdef CONFIG_HOTPLUG_CPU
static int smp_core99_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
......@@ -879,7 +880,6 @@ static struct notifier_block __cpuinitdata smp_core99_cpu_nb = {
static void __init smp_core99_bringup_done(void)
{
#ifdef CONFIG_PPC64
extern void g5_phy_disable_cpu1(void);
/* Close i2c bus if it was used for tb sync */
......@@ -894,14 +894,14 @@ static void __init smp_core99_bringup_done(void)
set_cpu_present(1, false);
g5_phy_disable_cpu1();
}
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_HOTPLUG_CPU
register_cpu_notifier(&smp_core99_cpu_nb);
#endif
if (ppc_md.progress)
ppc_md.progress("smp_core99_bringup_done", 0x349);
}
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_HOTPLUG_CPU
......@@ -975,7 +975,9 @@ static void pmac_cpu_die(void)
struct smp_ops_t core99_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_core99_probe,
#ifdef CONFIG_PPC64
.bringup_done = smp_core99_bringup_done,
#endif
.kick_cpu = smp_core99_kick_cpu,
.setup_cpu = smp_core99_setup_cpu,
.give_timebase = smp_core99_give_timebase,
......
......@@ -287,14 +287,22 @@ static int alloc_dispatch_logs(void)
int cpu, ret;
struct paca_struct *pp;
struct dtl_entry *dtl;
struct kmem_cache *dtl_cache;
if (!firmware_has_feature(FW_FEATURE_SPLPAR))
return 0;
dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES,
DISPATCH_LOG_BYTES, 0, NULL);
if (!dtl_cache) {
pr_warn("Failed to create dispatch trace log buffer cache\n");
pr_warn("Stolen time statistics will be unreliable\n");
return 0;
}
for_each_possible_cpu(cpu) {
pp = &paca[cpu];
dtl = kmalloc_node(DISPATCH_LOG_BYTES, GFP_KERNEL,
cpu_to_node(cpu));
dtl = kmem_cache_alloc(dtl_cache, GFP_KERNEL);
if (!dtl) {
pr_warn("Failed to allocate dispatch trace log for cpu %d\n",
cpu);
......
......@@ -324,6 +324,11 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
struct resource rsrc;
const int *bus_range;
if (!of_device_is_available(dev)) {
pr_warning("%s: disabled\n", dev->full_name);
return -ENODEV;
}
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
/* Fetch host bridge registers address */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment