Commit 5d99d778 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Mark Brown

ASoC: tlv320aic3x: Use snd_soc_dapm_mixer_update_power

Use snd_soc_dapm_mixer_update_power() instead of reimplementing its
functionality.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 6b3fc03b
......@@ -147,10 +147,9 @@ static int snd_soc_dapm_put_volsw_aic3x(struct snd_kcontrol *kcontrol,
int max = mc->max;
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
unsigned short val, val_mask;
int ret;
struct snd_soc_dapm_path *path;
int found = 0;
unsigned short val;
struct snd_soc_dapm_update update;
int connect, change;
val = (ucontrol->value.integer.value[0] & mask);
......@@ -158,42 +157,26 @@ static int snd_soc_dapm_put_volsw_aic3x(struct snd_kcontrol *kcontrol,
if (val)
val = mask;
connect = !!val;
if (invert)
val = mask - val;
val_mask = mask << shift;
val = val << shift;
mutex_lock(&widget->codec->mutex);
if (snd_soc_test_bits(widget->codec, reg, val_mask, val)) {
/* find dapm widget path assoc with kcontrol */
list_for_each_entry(path, &widget->dapm->card->paths, list) {
if (path->kcontrol != kcontrol)
continue;
mask <<= shift;
val <<= shift;
/* found, now check type */
found = 1;
if (val)
/* new connection */
path->connect = invert ? 0 : 1;
else
/* old connection must be powered down */
path->connect = invert ? 1 : 0;
change = snd_soc_test_bits(widget->codec, val, mask, reg);
if (change) {
update.kcontrol = kcontrol;
update.reg = reg;
update.mask = mask;
update.val = val;
dapm_mark_dirty(path->source, "tlv320aic3x source");
dapm_mark_dirty(path->sink, "tlv320aic3x sink");
break;
}
snd_soc_dapm_mixer_update_power(widget->dapm, kcontrol, connect,
&update);
}
mutex_unlock(&widget->codec->mutex);
if (found)
snd_soc_dapm_sync(widget->dapm);
ret = snd_soc_update_bits_locked(widget->codec, reg, val_mask, val);
return ret;
return change;
}
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment