Commit 5db0a4f6 authored by Gal Pressman's avatar Gal Pressman Committed by Saeed Mahameed

net/mlx5e: Expose physical layer statistical counters to ethtool

Use ethtool -S to query physical layer statistical counters including:
- rx_symbol_errors_phy: Number of symbol errors that were not corrected
  by FEC correction algorithm or that FEC was not active on this interface.

- rx_corrected_bits_phy: Number of corrected bits according to active
  FEC (RS/FC).
Signed-off-by: default avatarGal Pressman <galp@mellanox.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
parent d8dc0508
......@@ -170,7 +170,7 @@ static int mlx5e_get_sset_count(struct net_device *dev, int sset)
case ETH_SS_STATS:
return NUM_SW_COUNTERS +
MLX5E_NUM_Q_CNTRS(priv) +
NUM_VPORT_COUNTERS + NUM_PPORT_COUNTERS +
NUM_VPORT_COUNTERS + NUM_PPORT_COUNTERS(priv) +
MLX5E_NUM_RQ_STATS(priv) +
MLX5E_NUM_SQ_STATS(priv) +
MLX5E_NUM_PFC_COUNTERS(priv) +
......@@ -218,6 +218,10 @@ static void mlx5e_fill_stats_strings(struct mlx5e_priv *priv, uint8_t *data)
strcpy(data + (idx++) * ETH_GSTRING_LEN,
pport_2819_stats_desc[i].format);
for (i = 0; i < NUM_PPORT_PHY_STATISTICAL_COUNTERS(priv); i++)
strcpy(data + (idx++) * ETH_GSTRING_LEN,
pport_phy_statistical_stats_desc[i].format);
for (prio = 0; prio < NUM_PPORT_PRIO; prio++) {
for (i = 0; i < NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS; i++)
sprintf(data + (idx++) * ETH_GSTRING_LEN,
......@@ -330,6 +334,10 @@ static void mlx5e_get_ethtool_stats(struct net_device *dev,
data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pport.RFC_2819_counters,
pport_2819_stats_desc, i);
for (i = 0; i < NUM_PPORT_PHY_STATISTICAL_COUNTERS(priv); i++)
data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pport.phy_statistical_counters,
pport_phy_statistical_stats_desc, i);
for (prio = 0; prio < NUM_PPORT_PRIO; prio++) {
for (i = 0; i < NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS; i++)
data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pport.per_prio_counters[prio],
......
......@@ -268,6 +268,12 @@ static void mlx5e_update_pport_counters(struct mlx5e_priv *priv)
MLX5_SET(ppcnt_reg, in, grp, MLX5_PHYSICAL_LAYER_COUNTERS_GROUP);
mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPCNT, 0, 0);
if (MLX5_CAP_PCAM_FEATURE(mdev, ppcnt_statistical_group)) {
out = pstats->phy_statistical_counters;
MLX5_SET(ppcnt_reg, in, grp, MLX5_PHYSICAL_LAYER_STATISTICAL_GROUP);
mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPCNT, 0, 0);
}
MLX5_SET(ppcnt_reg, in, grp, MLX5_PER_PRIORITY_COUNTERS_GROUP);
for (prio = 0; prio < NUM_PPORT_PRIO; prio++) {
out = pstats->per_prio_counters[prio];
......
......@@ -201,6 +201,12 @@ static const struct counter_desc vport_stats_desc[] = {
#define PPORT_2819_GET(pstats, c) \
MLX5_GET64(ppcnt_reg, pstats->RFC_2819_counters, \
counter_set.eth_2819_cntrs_grp_data_layout.c##_high)
#define PPORT_PHY_STATISTICAL_OFF(c) \
MLX5_BYTE_OFF(ppcnt_reg, \
counter_set.phys_layer_statistical_cntrs.c##_high)
#define PPORT_PHY_STATISTICAL_GET(pstats, c) \
MLX5_GET64(ppcnt_reg, (pstats)->phy_statistical_counters, \
counter_set.phys_layer_statistical_cntrs.c##_high)
#define PPORT_PER_PRIO_OFF(c) \
MLX5_BYTE_OFF(ppcnt_reg, \
counter_set.eth_per_prio_grp_data_layout.c##_high)
......@@ -215,6 +221,7 @@ struct mlx5e_pport_stats {
__be64 RFC_2819_counters[MLX5_ST_SZ_QW(ppcnt_reg)];
__be64 per_prio_counters[NUM_PPORT_PRIO][MLX5_ST_SZ_QW(ppcnt_reg)];
__be64 phy_counters[MLX5_ST_SZ_QW(ppcnt_reg)];
__be64 phy_statistical_counters[MLX5_ST_SZ_QW(ppcnt_reg)];
};
static const struct counter_desc pport_802_3_stats_desc[] = {
......@@ -260,6 +267,11 @@ static const struct counter_desc pport_2819_stats_desc[] = {
{ "rx_8192_to_10239_bytes_phy", PPORT_2819_OFF(ether_stats_pkts8192to10239octets) },
};
static const struct counter_desc pport_phy_statistical_stats_desc[] = {
{ "rx_symbol_errors_phy", PPORT_PHY_STATISTICAL_OFF(phy_symbol_errors) },
{ "rx_corrected_bits_phy", PPORT_PHY_STATISTICAL_OFF(phy_corrected_bits) },
};
static const struct counter_desc pport_per_prio_traffic_stats_desc[] = {
{ "rx_prio%d_bytes", PPORT_PER_PRIO_OFF(rx_octets) },
{ "rx_prio%d_packets", PPORT_PER_PRIO_OFF(rx_frames) },
......@@ -360,13 +372,17 @@ static const struct counter_desc sq_stats_desc[] = {
#define NUM_PPORT_802_3_COUNTERS ARRAY_SIZE(pport_802_3_stats_desc)
#define NUM_PPORT_2863_COUNTERS ARRAY_SIZE(pport_2863_stats_desc)
#define NUM_PPORT_2819_COUNTERS ARRAY_SIZE(pport_2819_stats_desc)
#define NUM_PPORT_PHY_STATISTICAL_COUNTERS(priv) \
(ARRAY_SIZE(pport_phy_statistical_stats_desc) * \
MLX5_CAP_PCAM_FEATURE((priv)->mdev, ppcnt_statistical_group))
#define NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS \
ARRAY_SIZE(pport_per_prio_traffic_stats_desc)
#define NUM_PPORT_PER_PRIO_PFC_COUNTERS \
ARRAY_SIZE(pport_per_prio_pfc_stats_desc)
#define NUM_PPORT_COUNTERS (NUM_PPORT_802_3_COUNTERS + \
#define NUM_PPORT_COUNTERS(priv) (NUM_PPORT_802_3_COUNTERS + \
NUM_PPORT_2863_COUNTERS + \
NUM_PPORT_2819_COUNTERS + \
NUM_PPORT_PHY_STATISTICAL_COUNTERS(priv) + \
NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS * \
NUM_PPORT_PRIO)
#define NUM_RQ_STATS ARRAY_SIZE(rq_stats_desc)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment