Staging: add sxg network driver

This is the first rough cut at a driver for the Alacritech SLIC
Technology Non-Accelerated 10Gbe network driver

TODO:
  - lindent the code
  - remove typedefs
  - remove wrappers
  - checkpatch.pl cleanups
  - new functionality that the card needs

Cc: Christopher Harrer <charrer@alacritech.com>
Cc: Michael Miles <mmiles@alacritech.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/Kconfig

@@ -27,4 +27,6 @@ source "drivers/staging/et131x/Kconfig"
 
 source "drivers/staging/slicoss/Kconfig"
 
+source "drivers/staging/sxg/Kconfig"
+
 endif # STAGING

drivers/staging/Makefile

@@ -2,3 +2,4 @@
 
 obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
+obj-$(CONFIG_SXG)		+= sxg/

drivers/staging/sxg/Kconfig

+config SXG
+	tristate "Alacritech SLIC Technology Non-Accelerated 10Gbe support"
+	depends on PCI && NETDEV_10000
+	default n
+	help
+	  This driver supports the Alacritech SLIC Technology Non-Accelerated
+	  10Gbe network cards.
+
+	  To compile this driver as a module, choose
+	  M here: the module will be called sxg.

drivers/staging/sxg/Makefile

+obj-$(CONFIG_SXG)	+= sxg.o

drivers/staging/sxg/README

+This is the rough cut at a driver for the Alacritech SLIC Technology
+Non-Accelerated 10Gbe network driver.
+
+TODO:
+	- lindent the code
+	- remove typedefs
+	- remove wrappers
+	- checkpatch.pl cleanups
+	- new functionality that the card needs
+
+Please send patches to:
+        Greg Kroah-Hartman <gregkh@suse.de>
+for any cleanups that you do to this driver.

drivers/staging/sxg/sxg_os.h

+/**************************************************************************
+ *
+ * Copyright (C) 2000-2008 Alacritech, Inc.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials provided
+ *    with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL ALACRITECH, INC. OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The views and conclusions contained in the software and documentation
+ * are those of the authors and should not be interpreted as representing
+ * official policies, either expressed or implied, of Alacritech, Inc.
+ *
+ **************************************************************************/
+
+/*
+ * FILENAME: sxg_os.h
+ *
+ * These are the Linux-specific definitions required for the SLICOSS
+ * driver, which should allow for greater portability to other OSes.
+ */
+#ifndef _SLIC_OS_SPECIFIC_H_
+#define _SLIC_OS_SPECIFIC_H_
+
+#define FALSE	(0)
+#define TRUE	(1)
+
+
+typedef struct _LIST_ENTRY {
+	struct _LIST_ENTRY *nle_flink;
+	struct _LIST_ENTRY *nle_blink;
+} list_entry, LIST_ENTRY, *PLIST_ENTRY;
+
+#define InitializeListHead(l)                   \
+        (l)->nle_flink = (l)->nle_blink = (l)
+
+#define IsListEmpty(h)                          \
+        ((h)->nle_flink == (h))
+
+#define RemoveEntryList(e)                      \
+        do {                                    \
+                list_entry              *b;     \
+                list_entry              *f;     \
+                                                \
+                f = (e)->nle_flink;             \
+                b = (e)->nle_blink;             \
+                b->nle_flink = f;               \
+                f->nle_blink = b;               \
+        } while (0)
+
+/* These two have to be inlined since they return things. */
+
+static __inline PLIST_ENTRY
+RemoveHeadList(list_entry *l)
+{
+        list_entry              *f;
+        list_entry              *e;
+
+        e = l->nle_flink;
+        f = e->nle_flink;
+        l->nle_flink = f;
+        f->nle_blink = l;
+
+        return (e);
+}
+
+static __inline PLIST_ENTRY
+RemoveTailList(list_entry *l)
+{
+        list_entry              *b;
+        list_entry              *e;
+
+        e = l->nle_blink;
+        b = e->nle_blink;
+        l->nle_blink = b;
+        b->nle_flink = l;
+
+        return (e);
+}
+
+
+#define InsertTailList(l, e)                    \
+        do {                                    \
+                list_entry              *b;     \
+                                                \
+                b = (l)->nle_blink;             \
+                (e)->nle_flink = (l);           \
+                (e)->nle_blink = b;             \
+                b->nle_flink = (e);             \
+                (l)->nle_blink = (e);           \
+        } while (0)
+
+#define InsertHeadList(l, e)                    \
+        do {                                    \
+                list_entry              *f;     \
+                                                \
+                f = (l)->nle_flink;             \
+                (e)->nle_flink = f;             \
+                (e)->nle_blink = l;             \
+                f->nle_blink = (e);             \
+                (l)->nle_flink = (e);           \
+        } while (0)
+
+
+#define ATK_DEBUG  1
+
+#if ATK_DEBUG
+#define SLIC_TIMESTAMP(value) {                                             \
+        struct timeval  timev;                                              \
+        do_gettimeofday(&timev);                                            \
+        value = timev.tv_sec*1000000 + timev.tv_usec;                       \
+}
+#else
+#define SLIC_TIMESTAMP(value)
+#endif
+
+
+/******************  SXG DEFINES  *****************************************/
+
+#ifdef  ATKDBG
+#define SXG_TIMESTAMP(value) {                                             \
+        struct timeval  timev;                                              \
+        do_gettimeofday(&timev);                                            \
+        value = timev.tv_sec*1000000 + timev.tv_usec;                       \
+}
+#else
+#define SXG_TIMESTAMP(value)
+#endif
+
+#define WRITE_REG(reg,value,flush)                  sxg_reg32_write((&reg), (value), (flush))
+#define WRITE_REG64(a,reg,value,cpu)                sxg_reg64_write((a),(&reg),(value),(cpu))
+#define READ_REG(reg,value)   (value) = readl((void __iomem *)(&reg))
+
+#endif  /* _SLIC_OS_SPECIFIC_H_  */
+

drivers/staging/sxg/sxgdbg.h

+/**************************************************************************
+ *
+ * Copyright © 2000-2008 Alacritech, Inc.  All rights reserved.
+ *
+ * $Id: sxgdbg.h,v 1.1 2008/06/27 12:49:28 mook Exp $
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials provided
+ *    with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL ALACRITECH, INC. OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The views and conclusions contained in the software and documentation
+ * are those of the authors and should not be interpreted as representing
+ * official policies, either expressed or implied, of Alacritech, Inc.
+ *
+ **************************************************************************/
+
+/*
+ * FILENAME: sxgdbg.h
+ *
+ * All debug and assertion-based definitions and macros are included
+ * in this file for the SXGOSS driver.
+ */
+#ifndef _SXG_DEBUG_H_
+#define _SXG_DEBUG_H_
+
+#define ATKDBG  1
+#define ATK_TRACE_ENABLED 1
+
+#define DBG_ERROR(n, args...)	printk(KERN_EMERG n, ##args)
+
+#ifdef ASSERT
+#undef ASSERT
+#endif
+
+#ifdef SXG_ASSERT_ENABLED
+#ifndef ASSERT
+#define ASSERT(a)                                                                 \
+    {                                                                             \
+        if (!(a)) {                                                               \
+            DBG_ERROR("ASSERT() Failure: file %s, function %s  line %d\n",\
+                __FILE__, __FUNCTION__, __LINE__);                                \
+        }                                                                         \
+    }
+#endif
+#else
+#ifndef ASSERT
+#define ASSERT(a)
+#endif
+#endif /* SXG_ASSERT_ENABLED  */
+
+
+#ifdef ATKDBG
+/*
+ *  Global for timer granularity; every driver must have an instance
+ *  of this initialized to 0
+ */
+
+extern ulong ATKTimerDiv;
+
+/*
+ * trace_entry_t -
+ *
+ * This structure defines an entry in the trace buffer.  The
+ * first few fields mean the same from entry to entry, while
+ * the meaning of last several fields change to suit the
+ * needs of the trace entry.  Typically they are function call
+ * parameters.
+ */
+typedef struct _trace_entry_s {
+        char      name[8];        /* 8 character name - like 's'i'm'b'a'r'c'v' */
+        u32   time;           /* Current clock tic */
+        unsigned char     cpu;            /* Current CPU */
+        unsigned char     irql;           /* Current IRQL */
+        unsigned char     driver;         /* The driver which added the trace call */
+        unsigned char     pad2;           /* pad to 4 byte boundary - will probably get used */
+        u32   arg1;           /* Caller arg1 */
+        u32   arg2;           /* Caller arg2 */
+        u32   arg3;           /* Caller arg3 */
+        u32   arg4;           /* Caller arg4 */
+} trace_entry_t, *ptrace_entry_t;
+
+/*
+ * Driver types for driver field in trace_entry_t
+ */
+#define TRACE_SXG             1
+#define TRACE_VPCI            2
+#define TRACE_SLIC            3
+
+#define TRACE_ENTRIES   1024
+
+typedef struct _sxg_trace_buffer_t
+{
+        unsigned int                    size;                  /* aid for windbg extension */
+        unsigned int                    in;                    /* Where to add */
+        unsigned int                    level;                 /* Current Trace level */
+	spinlock_t	lock;                  /* For MP tracing */
+        trace_entry_t           entries[TRACE_ENTRIES];/* The circular buffer */
+} sxg_trace_buffer_t;
+
+/*
+ * The trace levels
+ *
+ * XXX At the moment I am only defining critical, important, and noisy.
+ * I am leaving room for more if anyone wants them.
+ */
+#define TRACE_NONE              0   /* For trace level - if no tracing wanted */
+#define TRACE_CRITICAL          1   /* minimal tracing - only critical stuff */
+#define TRACE_IMPORTANT         5   /* more tracing - anything important */
+#define TRACE_NOISY             10  /* Everything in the world */
+
+
+/**********************************************************************
+ *
+ * The macros themselves -
+ *
+ *********************************************************************/
+#if ATK_TRACE_ENABLED
+#define SXG_TRACE_INIT(buffer, tlevel)				\
+{								\
+	memset((buffer), 0, sizeof(sxg_trace_buffer_t));	\
+	(buffer)->level = (tlevel);				\
+	(buffer)->size = TRACE_ENTRIES;				\
+	spin_lock_init(&(buffer)->lock);			\
+}
+#else
+#define SXG_TRACE_INIT(buffer, tlevel)
+#endif
+
+/*
+ * The trace macro.  This is active only if ATK_TRACE_ENABLED is set.
+ */
+#if ATK_TRACE_ENABLED
+#define SXG_TRACE(tdriver, buffer, tlevel, tname, a1, a2, a3, a4) {        \
+        if ((buffer) && ((buffer)->level >= (tlevel))) {                      \
+                unsigned int            trace_irql = 0;    /* ?????? FIX THIS  */    \
+                unsigned int            trace_len;                                   \
+                ptrace_entry_t  trace_entry;                                 \
+                struct timeval  timev;                                       \
+                                                                             \
+                spin_lock(&(buffer)->lock);                       \
+                trace_entry = &(buffer)->entries[(buffer)->in];              \
+                do_gettimeofday(&timev);                                     \
+                                                                             \
+                memset(trace_entry->name, 0, 8);                             \
+                trace_len = strlen(tname);                                   \
+                trace_len = trace_len > 8 ? 8 : trace_len;                   \
+                memcpy(trace_entry->name, (tname), trace_len);               \
+                trace_entry->time = timev.tv_usec;                           \
+                trace_entry->cpu = (unsigned char)(smp_processor_id() & 0xFF);       \
+                trace_entry->driver = (tdriver);                             \
+                trace_entry->irql = trace_irql;                              \
+                trace_entry->arg1 = (ulong)(a1);                             \
+                trace_entry->arg2 = (ulong)(a2);                             \
+                trace_entry->arg3 = (ulong)(a3);                             \
+                trace_entry->arg4 = (ulong)(a4);                             \
+                                                                             \
+                (buffer)->in++;                                              \
+                if ((buffer)->in == TRACE_ENTRIES)                           \
+                        (buffer)->in = 0;                                    \
+                                                                             \
+                spin_unlock(&(buffer)->lock);                       \
+        }                                                                    \
+}
+#else
+#define SXG_TRACE(tdriver, buffer, tlevel, tname, a1, a2, a3, a4)
+#endif
+
+#endif
+
+#endif  /*  _SXG_DEBUG_H_  */

drivers/staging/sxg/sxgphycode.h

+/*
+ * Copyright (C) 1997-2008 Alacritech, Inc. All rights reserved
+ *
+ * sxgphycode.h:
+ *
+ * This file PHY microcode and register initialization data.
+ */
+
+/**********************************************************************
+ * PHY Microcode
+ *
+ * The following contains both PHY microcode and PHY register
+ * initialization data.  It is specific to both the PHY and the
+ * type of transceiver.
+ *
+ **********************************************************************/
+
+/*
+ * Download for AEL2005C PHY with SR/LR transceiver (10GBASE-SR or 10GBASE-LR)
+ */
+static PHY_UCODE PhyUcode[] = {
+	/*
+	 * NOTE:  An address of 0 is a special case.  When the download routine
+	 * sees an address of 0, it does not write to the PHY.  Instead, it
+	 * delays the download.  The length of the delay (in ms) is given in
+	 * the data field.
+	 *
+	 * Delays are required at certain points.
+	 */
+
+	/*
+	 * Platform-specific MDIO Patches:
+	 * (include patches for 10G RX polarity flip, 50Mhz Synth, etc)
+	 */
+	/* Addr, Data */
+	{0xc017, 0xfeb0},	/* flip RX_LOS polarity (mandatory */
+				/*  patch for SFP+ applications) */
+	{0xC001, 0x0428},	/* flip RX serial polarity */
+
+	{0xc013, 0xf341},	/* invert lxmit clock (mandatory patch) */
+	{0xc210, 0x8000},	/* reset datapath (mandatory patch) */
+	{0xc210, 0x8100},	/* reset datapath (mandatory patch) */
+	{0xc210, 0x8000},	/* reset datapath (mandatory patch) */
+	{0xc210, 0x0000},	/* reset datapath (mandatory patch) */
+	{0x0000, 0x0032},	/* wait for 50ms for datapath reset to */
+				/* complete. (mandatory patch) */
+
+	/* Configure the LED's */
+	{0xc214, 0x0099},	/* configure the LED drivers */
+	{0xc216, 0x5f5f},	/* configure the Activity LED */
+	{0xc217, 0x33ff},	/* configure the Link LED */
+
+	/* Transceiver-specific MDIO Patches: */
+	{0xc010, 0x448a},	/* (bit 14) mask out high BER input from the */
+				/* LOS signal in 1.000A */
+				/* (mandatory patch for SR code)*/
+	{0xc003, 0x0181},	/* (bit 7) enable the CDR inc setting in */
+				/* 1.C005 (mandatory patch for SR code) */
+
+	/* Transceiver-specific Microcontroller Initialization: */
+	{0xc04a, 0x5200},	/* activate microcontroller and pause */
+	{0x0000, 0x0032},	/* wait 50ms for microcontroller before */
+				/* writing in code. */
+
+	/* code block starts here: */
+	{0xcc00, 0x2009},
+	{0xcc01, 0x3009},
+	{0xcc02, 0x27ff},
+	{0xcc03, 0x300f},
+	{0xcc04, 0x200c},
+	{0xcc05, 0x300c},
+	{0xcc06, 0x20c4},
+	{0xcc07, 0x3c04},
+	{0xcc08, 0x6437},
+	{0xcc09, 0x20c4},
+	{0xcc0a, 0x3c04},
+	{0xcc0b, 0x6437},
+	{0xcc0c, 0x25c4},
+	{0xcc0d, 0x3c54},
+	{0xcc0e, 0x6724},
+	{0xcc0f, 0x25c4},
+	{0xcc10, 0x3c54},
+	{0xcc11, 0x6724},
+	{0xcc12, 0x2042},
+	{0xcc13, 0x3012},
+	{0xcc14, 0x1002},
+	{0xcc15, 0x2482},
+	{0xcc16, 0x3012},
+	{0xcc17, 0x1002},
+	{0xcc18, 0x2a32},
+	{0xcc19, 0x3002},
+	{0xcc1a, 0x1002},
+	{0xcc1b, 0x200d},
+	{0xcc1c, 0x304d},
+	{0xcc1d, 0x2862},
+	{0xcc1e, 0x3012},
+	{0xcc1f, 0x1002},
+	{0xcc20, 0x2982},
+	{0xcc21, 0x3002},
+	{0xcc22, 0x1002},
+	{0xcc23, 0x628f},
+	{0xcc24, 0x20a4},
+	{0xcc25, 0x3004},
+	{0xcc26, 0x6438},
+	{0xcc27, 0x20a4},
+	{0xcc28, 0x3004},
+	{0xcc29, 0x6438},
+	{0xcc2a, 0x2015},
+	{0xcc2b, 0x3005},
+	{0xcc2c, 0x5853},
+	{0xcc2d, 0x2bd2},
+	{0xcc2e, 0x3002},
+	{0xcc2f, 0x1342},
+	{0xcc30, 0x200c},
+	{0xcc31, 0x300c},
+	{0xcc32, 0x2ff7},
+	{0xcc33, 0x30f7},
+	{0xcc34, 0x20c4},
+	{0xcc35, 0x3c04},
+	{0xcc36, 0x6724},
+	{0xcc37, 0x20c4},
+	{0xcc38, 0x3c04},
+	{0xcc39, 0x6724},
+	{0xcc3a, 0x2d32},
+	{0xcc3b, 0x3002},
+	{0xcc3c, 0x1002},
+	{0xcc3d, 0x2008},
+	{0xcc3e, 0x3008},
+	{0xcc3f, 0x5c83},
+	{0xcc40, 0x2d52},
+	{0xcc41, 0x3002},
+	{0xcc42, 0x1352},
+	{0xcc43, 0x2008},
+	{0xcc44, 0x3008},
+	{0xcc45, 0x5c83},
+	{0xcc46, 0x2d32},
+	{0xcc47, 0x3002},
+	{0xcc48, 0x1352},
+	{0xcc49, 0x201c},
+	{0xcc4a, 0x300c},
+	{0xcc4b, 0x200d},
+	{0xcc4c, 0x310d},
+	{0xcc4d, 0x2862},
+	{0xcc4e, 0x3012},
+	{0xcc4f, 0x1002},
+	{0xcc50, 0x2ed2},
+	{0xcc51, 0x3002},
+	{0xcc52, 0x1342},
+	{0xcc53, 0x6f72},
+	{0xcc54, 0x1002},
+	{0xcc55, 0x628f},
+	{0xcc56, 0x2514},
+	{0xcc57, 0x3c64},
+	{0xcc58, 0x6436},
+	{0xcc59, 0x2514},
+	{0xcc5a, 0x3c64},
+	{0xcc5b, 0x6436},
+	{0xcc5c, 0x2fa4},
+	{0xcc5d, 0x3cd4},
+	{0xcc5e, 0x6624},
+	{0xcc5f, 0x2fa4},
+	{0xcc60, 0x3cd4},
+	{0xcc61, 0x6624},
+	{0xcc62, 0x2f45},
+	{0xcc63, 0x3015},
+	{0xcc64, 0x5653},
+	{0xcc65, 0x2eb2},
+	{0xcc66, 0x3002},
+	{0xcc67, 0x13d2},
+	{0xcc68, 0x2ed2},
+	{0xcc69, 0x3002},
+	{0xcc6a, 0x1002},
+	{0xcc6b, 0x6f72},
+	{0xcc6c, 0x1002},
+	{0xcc6d, 0x628f},
+	{0xcc6e, 0x2602},
+	{0xcc6f, 0x3012},
+	{0xcc70, 0x1002},
+	{0xcc71, 0x200d},
+	{0xcc72, 0x320d},
+	{0xcc73, 0x2862},
+	{0xcc74, 0x3012},
+	{0xcc75, 0x1002},
+	{0xcc76, 0x25c4},
+	{0xcc77, 0x3c54},
+	{0xcc78, 0x6437},
+	{0xcc79, 0x25c4},
+	{0xcc7a, 0x3c54},
+	{0xcc7b, 0x6437},
+	{0xcc7c, 0x20c4},
+	{0xcc7d, 0x3c04},
+	{0xcc7e, 0x6724},
+	{0xcc7f, 0x20c4},
+	{0xcc80, 0x3c04},
+	{0xcc81, 0x6724},
+	{0xcc82, 0x6f72},
+	{0xcc83, 0x1002},
+	{0xcc84, 0x628f},
+	{0xcc85, 0x26f2},
+	{0xcc86, 0x3012},
+	{0xcc87, 0x1002},
+	{0xcc88, 0xc503},
+	{0xcc89, 0xd5d5},
+	{0xcc8a, 0xc600},
+	{0xcc8b, 0x2a6d},
+	{0xcc8c, 0xc601},
+	{0xcc8d, 0x2a4c},
+	{0xcc8e, 0xc602},
+	{0xcc8f, 0x0111},
+	{0xcc90, 0xc60c},
+	{0xcc91, 0x5900},
+	{0xcc92, 0xc710},
+	{0xcc93, 0x0700},
+	{0xcc94, 0xc718},
+	{0xcc95, 0x0700},
+	{0xcc96, 0xc720},
+	{0xcc97, 0x4700},
+	{0xcc98, 0xc801},
+	{0xcc99, 0x7f50},
+	{0xcc9a, 0xc802},
+	{0xcc9b, 0x7760},
+	{0xcc9c, 0xc803},
+	{0xcc9d, 0x7fce},
+	{0xcc9e, 0xc804},
+	{0xcc9f, 0x5700},
+	{0xcca0, 0xc805},
+	{0xcca1, 0x5f11},
+	{0xcca2, 0xc806},
+	{0xcca3, 0x4751},
+	{0xcca4, 0xc807},
+	{0xcca5, 0x57e1},
+	{0xcca6, 0xc808},
+	{0xcca7, 0x2700},
+	{0xcca8, 0xc809},
+	{0xcca9, 0x0000},
+	{0xccaa, 0xc821},
+	{0xccab, 0x0002},
+	{0xccac, 0xc822},
+	{0xccad, 0x0014},
+	{0xccae, 0xc832},
+	{0xccaf, 0x1186},
+	{0xccb0, 0xc847},
+	{0xccb1, 0x1e02},
+	{0xccb2, 0xc013},
+	{0xccb3, 0xf341},
+	{0xccb4, 0xc01a},
+	{0xccb5, 0x0446},
+	{0xccb6, 0xc024},
+	{0xccb7, 0x1000},
+	{0xccb8, 0xc025},
+	{0xccb9, 0x0a00},
+	{0xccba, 0xc026},
+	{0xccbb, 0x0c0c},
+	{0xccbc, 0xc027},
+	{0xccbd, 0x0c0c},
+	{0xccbe, 0xc029},
+	{0xccbf, 0x00a0},
+	{0xccc0, 0xc030},
+	{0xccc1, 0x0a00},
+	{0xccc2, 0xc03c},
+	{0xccc3, 0x001c},
+	{0xccc4, 0xc005},
+	{0xccc5, 0x7a06},
+	{0xccc6, 0x0000},
+	{0xccc7, 0x0000},
+	{0xccc8, 0x628f},
+	{0xccc9, 0x26f2},
+	{0xccca, 0x3012},
+	{0xcccb, 0x1002},
+	{0xcccc, 0xc620},
+	{0xcccd, 0x0000},
+	{0xccce, 0xc621},
+	{0xcccf, 0x003f},
+	{0xccd0, 0xc622},
+	{0xccd1, 0x0000},
+	{0xccd2, 0xc623},
+	{0xccd3, 0x0000},
+	{0xccd4, 0xc624},
+	{0xccd5, 0x0000},
+	{0xccd6, 0xc625},
+	{0xccd7, 0x0000},
+	{0xccd8, 0xc627},
+	{0xccd9, 0x0000},
+	{0xccda, 0xc628},
+	{0xccdb, 0x0000},
+	{0xccdc, 0xc62c},
+	{0xccdd, 0x0000},
+	{0xccde, 0x0000},
+	{0xccdf, 0x0000},
+	{0xcce0, 0x628f},
+	{0xcce1, 0xd019},
+	{0xcce2, 0x26f2},
+	{0xcce3, 0x3012},
+	{0xcce4, 0x1002},
+	{0xcce5, 0xc210},
+	{0xcce6, 0x8000},
+	{0xcce7, 0xc210},
+	{0xcce8, 0x8010},
+	{0xcce9, 0xc210},
+	{0xccea, 0x8000},
+	{0xcceb, 0xc210},
+	{0xccec, 0x0000},
+	{0xcced, 0x0000},
+	{0xccee, 0x0000},
+	{0xccef, 0x8221},
+	{0xccf0, 0x2752},
+	{0xccf1, 0x3012},
+	{0xccf2, 0x1002},
+	{0xccf3, 0x6f72},
+	{0xccf4, 0x1002},
+	{0xccf5, 0x2806},
+	{0xccf6, 0x3006},
+	{0xccf7, 0x2007},
+	{0xccf8, 0x3cc7},
+	{0xccf9, 0xe161},
+	{0xccfa, 0xc171},
+	{0xccfb, 0x6134},
+	{0xccfc, 0x6135},
+	{0xccfd, 0x5453},
+	{0xccfe, 0x2858},
+	{0xccff, 0x3018},
+	{0xcd00, 0x1348},
+	{0xcd01, 0x6524},
+	{0xcd02, 0x27b8},
+	{0xcd03, 0x3018},
+	{0xcd04, 0x1008},
+	{0xcd05, 0x1002},
+	{0xcd06, 0x628f},
+	{0xcd07, 0x5dd3},
+	{0xcd08, 0x2906},
+	{0xcd09, 0x3016},
+	{0xcd0a, 0x1306},
+	{0xcd0b, 0x2ff7},
+	{0xcd0c, 0x30f7},
+	{0xcd0d, 0x60b7},
+	{0xcd0e, 0xdffd},
+	{0xcd0f, 0x0008},
+	{0xcd10, 0x6f72},
+	{0xcd11, 0x1002},
+	{0xcd12, 0x0000},
+	{0xcdff, 0x0a01},
+	/* end of code block */
+
+	/* Unpause the microcontroller to start program */
+	{0xca00, 0x0080},
+	{0xca12, 0x0000},
+	{0x0000, 0x000A},	/* wait 10ms just to be safe */
+	{0xffff, 0xffff}	/* table terminator */
+};