Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull ARM cpufreq updates for v5.14-rc1 from Viresh Kumar:

"- Add frequency invariance support for CPPC driver again and related
   fixes/changes."

 - Minor changes/cleanups for Meditak driver (Fabien Parent and Seiya
   Wang), Qcom platform (Sibi Sankar), and SCMI driver (Christophe
   JAILLET).

 - New bindings for generic performance domains (Sudeep Holla).

 - Rename black/white-lists (Viresh Kumar)."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: CPPC: Add support for frequency invariance
  arch_topology: Avoid use-after-free for scale_freq_data
  cpufreq: CPPC: Pass structure instance by reference
  cpufreq: CPPC: Fix potential memleak in cppc_cpufreq_cpu_init
  dt-bindings: cpufreq: update cpu type and clock name for MT8173 SoC
  clk: mediatek: remove deprecated CLK_INFRA_CA57SEL for MT8173 SoC
  cpufreq: dt: Rename black/white-lists
  cpufreq: scmi: Fix an error message
  cpufreq: mediatek: add support for mt8365
  dt-bindings: dvfs: Add support for generic performance domains
  cpufreq: blacklist SC7280 in cpufreq-dt-platdev

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -257,6 +257,13 @@ properties:
 
       where voltage is in V, frequency is in MHz.
 
+  performance-domains:
+    maxItems: 1
+    description:
+      List of phandles and performance domain specifiers, as defined by
+      bindings of the performance domain provider. See also
+      dvfs/performance-domain.yaml.
+
   power-domains:
     description:
       List of phandles and PM domain specifiers, as defined by bindings of the

Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt

@@ -202,11 +202,11 @@ Example 2 (MT8173 SoC):
 
 	cpu2: cpu@100 {
 		device_type = "cpu";
-		compatible = "arm,cortex-a57";
+		compatible = "arm,cortex-a72";
 		reg = <0x100>;
 		enable-method = "psci";
 		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+		clocks = <&infracfg CLK_INFRA_CA72SEL>,
 			 <&apmixedsys CLK_APMIXED_MAINPLL>;
 		clock-names = "cpu", "intermediate";
 		operating-points-v2 = <&cpu_opp_table_b>;
@@ -214,11 +214,11 @@ Example 2 (MT8173 SoC):
 
 	cpu3: cpu@101 {
 		device_type = "cpu";
-		compatible = "arm,cortex-a57";
+		compatible = "arm,cortex-a72";
 		reg = <0x101>;
 		enable-method = "psci";
 		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+		clocks = <&infracfg CLK_INFRA_CA72SEL>,
 			 <&apmixedsys CLK_APMIXED_MAINPLL>;
 		clock-names = "cpu", "intermediate";
 		operating-points-v2 = <&cpu_opp_table_b>;

Documentation/devicetree/bindings/dvfs/performance-domain.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dvfs/performance-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic performance domains
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+
+description: |+
+  This binding is intended for performance management of groups of devices or
+  CPUs that run in the same performance domain. Performance domains must not
+  be confused with power domains. A performance domain is defined by a set
+  of devices that always have to run at the same performance level. For a given
+  performance domain, there is a single point of control that affects all the
+  devices in the domain, making it impossible to set the performance level of
+  an individual device in the domain independently from other devices in
+  that domain. For example, a set of CPUs that share a voltage domain, and
+  have a common frequency control, is said to be in the same performance
+  domain.
+
+  This device tree binding can be used to bind performance domain consumer
+  devices with their performance domains provided by performance domain
+  providers. A performance domain provider can be represented by any node in
+  the device tree and can provide one or more performance domains. A consumer
+  node can refer to the provider by a phandle and a set of phandle arguments
+  (so called performance domain specifiers) of length specified by the
+  \#performance-domain-cells property in the performance domain provider node.
+
+select: true
+
+properties:
+  "#performance-domain-cells":
+    description:
+      Number of cells in a performance domain specifier. Typically 0 for nodes
+      representing a single performance domain and 1 for nodes providing
+      multiple performance domains (e.g. performance controllers), but can be
+      any value as specified by device tree binding documentation of particular
+      provider.
+    enum: [ 0, 1 ]
+
+  performance-domains:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description:
+      A phandle and performance domain specifier as defined by bindings of the
+      performance controller/provider specified by phandle.
+
+additionalProperties: true
+
+examples:
+  - |
+    performance: performance-controller@12340000 {
+        compatible = "qcom,cpufreq-hw";
+        reg = <0x12340000 0x1000>;
+        #performance-domain-cells = <1>;
+    };
+
+    // The node above defines a performance controller that is a performance
+    // domain provider and expects one cell as its phandle argument.
+
+    cpus {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x0>;
+            performance-domains = <&performance 1>;
+        };
+    };

drivers/base/arch_topology.c

@@ -18,10 +18,11 @@
 #include <linux/cpumask.h>
 #include <linux/init.h>
 #include <linux/percpu.h>
+#include <linux/rcupdate.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 
-static DEFINE_PER_CPU(struct scale_freq_data *, sft_data);
+static DEFINE_PER_CPU(struct scale_freq_data __rcu *, sft_data);
 static struct cpumask scale_freq_counters_mask;
 static bool scale_freq_invariant;
 
@@ -66,16 +67,20 @@ void topology_set_scale_freq_source(struct scale_freq_data *data,
 	if (cpumask_empty(&scale_freq_counters_mask))
 		scale_freq_invariant = topology_scale_freq_invariant();
 
+	rcu_read_lock();
+
 	for_each_cpu(cpu, cpus) {
-		sfd = per_cpu(sft_data, cpu);
+		sfd = rcu_dereference(*per_cpu_ptr(&sft_data, cpu));
 
 		/* Use ARCH provided counters whenever possible */
 		if (!sfd || sfd->source != SCALE_FREQ_SOURCE_ARCH) {
-			per_cpu(sft_data, cpu) = data;
+			rcu_assign_pointer(per_cpu(sft_data, cpu), data);
 			cpumask_set_cpu(cpu, &scale_freq_counters_mask);
 		}
 	}
 
+	rcu_read_unlock();
+
 	update_scale_freq_invariant(true);
 }
 EXPORT_SYMBOL_GPL(topology_set_scale_freq_source);
@@ -86,22 +91,32 @@ void topology_clear_scale_freq_source(enum scale_freq_source source,
 	struct scale_freq_data *sfd;
 	int cpu;
 
+	rcu_read_lock();
+
 	for_each_cpu(cpu, cpus) {
-		sfd = per_cpu(sft_data, cpu);
+		sfd = rcu_dereference(*per_cpu_ptr(&sft_data, cpu));
 
 		if (sfd && sfd->source == source) {
-			per_cpu(sft_data, cpu) = NULL;
+			rcu_assign_pointer(per_cpu(sft_data, cpu), NULL);
 			cpumask_clear_cpu(cpu, &scale_freq_counters_mask);
 		}
 	}
 
+	rcu_read_unlock();
+
+	/*
+	 * Make sure all references to previous sft_data are dropped to avoid
+	 * use-after-free races.
+	 */
+	synchronize_rcu();
+
 	update_scale_freq_invariant(false);
 }
 EXPORT_SYMBOL_GPL(topology_clear_scale_freq_source);
 
 void topology_scale_freq_tick(void)
 {
-	struct scale_freq_data *sfd = *this_cpu_ptr(&sft_data);
+	struct scale_freq_data *sfd = rcu_dereference_sched(*this_cpu_ptr(&sft_data));
 
 	if (sfd)
 		sfd->set_freq_scale();

drivers/cpufreq/Kconfig.arm

@@ -19,6 +19,16 @@ config ACPI_CPPC_CPUFREQ
 
 	  If in doubt, say N.
 
+config ACPI_CPPC_CPUFREQ_FIE
+	bool "Frequency Invariance support for CPPC cpufreq driver"
+	depends on ACPI_CPPC_CPUFREQ && GENERIC_ARCH_TOPOLOGY
+	default y
+	help
+	  This extends frequency invariance support in the CPPC cpufreq driver,
+	  by using CPPC delivered and reference performance counters.
+
+	  If in doubt, say N.
+
 config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM
 	tristate "Allwinner nvmem based SUN50I CPUFreq driver"
 	depends on ARCH_SUNXI

drivers/cpufreq/cppc_cpufreq.c

@@ -10,14 +10,18 @@
 
 #define pr_fmt(fmt)	"CPPC Cpufreq:"	fmt
 
+#include <linux/arch_topology.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/dmi.h>
+#include <linux/irq_work.h>
+#include <linux/kthread.h>
 #include <linux/time.h>
 #include <linux/vmalloc.h>
+#include <uapi/linux/sched/types.h>
 
 #include <asm/unaligned.h>
 
@@ -57,6 +61,216 @@ static struct cppc_workaround_oem_info wa_info[] = {
 	}
 };
 
+#ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
+
+/* Frequency invariance support */
+struct cppc_freq_invariance {
+	int cpu;
+	struct irq_work irq_work;
+	struct kthread_work work;
+	struct cppc_perf_fb_ctrs prev_perf_fb_ctrs;
+	struct cppc_cpudata *cpu_data;
+};
+
+static DEFINE_PER_CPU(struct cppc_freq_invariance, cppc_freq_inv);
+static struct kthread_worker *kworker_fie;
+
+static struct cpufreq_driver cppc_cpufreq_driver;
+static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpu);
+static int cppc_perf_from_fbctrs(struct cppc_cpudata *cpu_data,
+				 struct cppc_perf_fb_ctrs *fb_ctrs_t0,
+				 struct cppc_perf_fb_ctrs *fb_ctrs_t1);
+
+/**
+ * cppc_scale_freq_workfn - CPPC arch_freq_scale updater for frequency invariance
+ * @work: The work item.
+ *
+ * The CPPC driver register itself with the topology core to provide its own
+ * implementation (cppc_scale_freq_tick()) of topology_scale_freq_tick() which
+ * gets called by the scheduler on every tick.
+ *
+ * Note that the arch specific counters have higher priority than CPPC counters,
+ * if available, though the CPPC driver doesn't need to have any special
+ * handling for that.
+ *
+ * On an invocation of cppc_scale_freq_tick(), we schedule an irq work (since we
+ * reach here from hard-irq context), which then schedules a normal work item
+ * and cppc_scale_freq_workfn() updates the per_cpu arch_freq_scale variable
+ * based on the counter updates since the last tick.
+ */
+static void cppc_scale_freq_workfn(struct kthread_work *work)
+{
+	struct cppc_freq_invariance *cppc_fi;
+	struct cppc_perf_fb_ctrs fb_ctrs = {0};
+	struct cppc_cpudata *cpu_data;
+	unsigned long local_freq_scale;
+	u64 perf;
+
+	cppc_fi = container_of(work, struct cppc_freq_invariance, work);
+	cpu_data = cppc_fi->cpu_data;
+
+	if (cppc_get_perf_ctrs(cppc_fi->cpu, &fb_ctrs)) {
+		pr_warn("%s: failed to read perf counters\n", __func__);
+		return;
+	}
+
+	perf = cppc_perf_from_fbctrs(cpu_data, &cppc_fi->prev_perf_fb_ctrs,
+				     &fb_ctrs);
+	cppc_fi->prev_perf_fb_ctrs = fb_ctrs;
+
+	perf <<= SCHED_CAPACITY_SHIFT;
+	local_freq_scale = div64_u64(perf, cpu_data->perf_caps.highest_perf);
+
+	/* This can happen due to counter's overflow */
+	if (unlikely(local_freq_scale > 1024))
+		local_freq_scale = 1024;
+
+	per_cpu(arch_freq_scale, cppc_fi->cpu) = local_freq_scale;
+}
+
+static void cppc_irq_work(struct irq_work *irq_work)
+{
+	struct cppc_freq_invariance *cppc_fi;
+
+	cppc_fi = container_of(irq_work, struct cppc_freq_invariance, irq_work);
+	kthread_queue_work(kworker_fie, &cppc_fi->work);
+}
+
+static void cppc_scale_freq_tick(void)
+{
+	struct cppc_freq_invariance *cppc_fi = &per_cpu(cppc_freq_inv, smp_processor_id());
+
+	/*
+	 * cppc_get_perf_ctrs() can potentially sleep, call that from the right
+	 * context.
+	 */
+	irq_work_queue(&cppc_fi->irq_work);
+}
+
+static struct scale_freq_data cppc_sftd = {
+	.source = SCALE_FREQ_SOURCE_CPPC,
+	.set_freq_scale = cppc_scale_freq_tick,
+};
+
+static void cppc_cpufreq_cpu_fie_init(struct cpufreq_policy *policy)
+{
+	struct cppc_freq_invariance *cppc_fi;
+	int cpu, ret;
+
+	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+		return;
+
+	for_each_cpu(cpu, policy->cpus) {
+		cppc_fi = &per_cpu(cppc_freq_inv, cpu);
+		cppc_fi->cpu = cpu;
+		cppc_fi->cpu_data = policy->driver_data;
+		kthread_init_work(&cppc_fi->work, cppc_scale_freq_workfn);
+		init_irq_work(&cppc_fi->irq_work, cppc_irq_work);
+
+		ret = cppc_get_perf_ctrs(cpu, &cppc_fi->prev_perf_fb_ctrs);
+		if (ret) {
+			pr_warn("%s: failed to read perf counters for cpu:%d: %d\n",
+				__func__, cpu, ret);
+
+			/*
+			 * Don't abort if the CPU was offline while the driver
+			 * was getting registered.
+			 */
+			if (cpu_online(cpu))
+				return;
+		}
+	}
+
+	/* Register for freq-invariance */
+	topology_set_scale_freq_source(&cppc_sftd, policy->cpus);
+}
+
+/*
+ * We free all the resources on policy's removal and not on CPU removal as the
+ * irq-work are per-cpu and the hotplug core takes care of flushing the pending
+ * irq-works (hint: smpcfd_dying_cpu()) on CPU hotplug. Even if the kthread-work
+ * fires on another CPU after the concerned CPU is removed, it won't harm.
+ *
+ * We just need to make sure to remove them all on policy->exit().
+ */
+static void cppc_cpufreq_cpu_fie_exit(struct cpufreq_policy *policy)
+{
+	struct cppc_freq_invariance *cppc_fi;
+	int cpu;
+
+	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+		return;
+
+	/* policy->cpus will be empty here, use related_cpus instead */
+	topology_clear_scale_freq_source(SCALE_FREQ_SOURCE_CPPC, policy->related_cpus);
+
+	for_each_cpu(cpu, policy->related_cpus) {
+		cppc_fi = &per_cpu(cppc_freq_inv, cpu);
+		irq_work_sync(&cppc_fi->irq_work);
+		kthread_cancel_work_sync(&cppc_fi->work);
+	}
+}
+
+static void __init cppc_freq_invariance_init(void)
+{
+	struct sched_attr attr = {
+		.size		= sizeof(struct sched_attr),
+		.sched_policy	= SCHED_DEADLINE,
+		.sched_nice	= 0,
+		.sched_priority	= 0,
+		/*
+		 * Fake (unused) bandwidth; workaround to "fix"
+		 * priority inheritance.
+		 */
+		.sched_runtime	= 1000000,
+		.sched_deadline = 10000000,
+		.sched_period	= 10000000,
+	};
+	int ret;
+
+	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+		return;
+
+	kworker_fie = kthread_create_worker(0, "cppc_fie");
+	if (IS_ERR(kworker_fie))
+		return;
+
+	ret = sched_setattr_nocheck(kworker_fie->task, &attr);
+	if (ret) {
+		pr_warn("%s: failed to set SCHED_DEADLINE: %d\n", __func__,
+			ret);
+		kthread_destroy_worker(kworker_fie);
+		return;
+	}
+}
+
+static void cppc_freq_invariance_exit(void)
+{
+	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+		return;
+
+	kthread_destroy_worker(kworker_fie);
+	kworker_fie = NULL;
+}
+
+#else
+static inline void cppc_cpufreq_cpu_fie_init(struct cpufreq_policy *policy)
+{
+}
+
+static inline void cppc_cpufreq_cpu_fie_exit(struct cpufreq_policy *policy)
+{
+}
+
+static inline void cppc_freq_invariance_init(void)
+{
+}
+
+static inline void cppc_freq_invariance_exit(void)
+{
+}
+#endif /* CONFIG_ACPI_CPPC_CPUFREQ_FIE */
+
 /* Callback function used to retrieve the max frequency from DMI */
 static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
 {
@@ -256,6 +470,16 @@ static struct cppc_cpudata *cppc_cpufreq_get_cpu_data(unsigned int cpu)
 	return NULL;
 }
 
+static void cppc_cpufreq_put_cpu_data(struct cpufreq_policy *policy)
+{
+	struct cppc_cpudata *cpu_data = policy->driver_data;
+
+	list_del(&cpu_data->node);
+	free_cpumask_var(cpu_data->shared_cpu_map);
+	kfree(cpu_data);
+	policy->driver_data = NULL;
+}
+
 static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
@@ -309,7 +533,8 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	default:
 		pr_debug("Unsupported CPU co-ord type: %d\n",
 			 policy->shared_type);
-		return -EFAULT;
+		ret = -EFAULT;
+		goto out;
 	}
 
 	/*
@@ -324,10 +549,17 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	cpu_data->perf_ctrls.desired_perf =  caps->highest_perf;
 
 	ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls);
-	if (ret)
+	if (ret) {
 		pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n",
 			 caps->highest_perf, cpu, ret);
+		goto out;
+	}
 
+	cppc_cpufreq_cpu_fie_init(policy);
+	return 0;
+
+out:
+	cppc_cpufreq_put_cpu_data(policy);
 	return ret;
 }
 
@@ -338,6 +570,8 @@ static int cppc_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 	unsigned int cpu = policy->cpu;
 	int ret;
 
+	cppc_cpufreq_cpu_fie_exit(policy);
+
 	cpu_data->perf_ctrls.desired_perf = caps->lowest_perf;
 
 	ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls);
@@ -345,12 +579,7 @@ static int cppc_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 		pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n",
 			 caps->lowest_perf, cpu, ret);
 
-	/* Remove CPU node from list and free driver data for policy */
-	free_cpumask_var(cpu_data->shared_cpu_map);
-	list_del(&cpu_data->node);
-	kfree(policy->driver_data);
-	policy->driver_data = NULL;
-
+	cppc_cpufreq_put_cpu_data(policy);
 	return 0;
 }
 
@@ -362,28 +591,25 @@ static inline u64 get_delta(u64 t1, u64 t0)
 	return (u32)t1 - (u32)t0;
 }
 
-static int cppc_get_rate_from_fbctrs(struct cppc_cpudata *cpu_data,
-				     struct cppc_perf_fb_ctrs fb_ctrs_t0,
-				     struct cppc_perf_fb_ctrs fb_ctrs_t1)
+static int cppc_perf_from_fbctrs(struct cppc_cpudata *cpu_data,
+				 struct cppc_perf_fb_ctrs *fb_ctrs_t0,
+				 struct cppc_perf_fb_ctrs *fb_ctrs_t1)
 {
 	u64 delta_reference, delta_delivered;
-	u64 reference_perf, delivered_perf;
+	u64 reference_perf;
 
-	reference_perf = fb_ctrs_t0.reference_perf;
+	reference_perf = fb_ctrs_t0->reference_perf;
 
-	delta_reference = get_delta(fb_ctrs_t1.reference,
-				    fb_ctrs_t0.reference);
-	delta_delivered = get_delta(fb_ctrs_t1.delivered,
-				    fb_ctrs_t0.delivered);
+	delta_reference = get_delta(fb_ctrs_t1->reference,
+				    fb_ctrs_t0->reference);
+	delta_delivered = get_delta(fb_ctrs_t1->delivered,
+				    fb_ctrs_t0->delivered);
 
-	/* Check to avoid divide-by zero */
-	if (delta_reference || delta_delivered)
-		delivered_perf = (reference_perf * delta_delivered) /
-					delta_reference;
-	else
-		delivered_perf = cpu_data->perf_ctrls.desired_perf;
+	/* Check to avoid divide-by zero and invalid delivered_perf */
+	if (!delta_reference || !delta_delivered)
+		return cpu_data->perf_ctrls.desired_perf;
 
-	return cppc_cpufreq_perf_to_khz(cpu_data, delivered_perf);
+	return (reference_perf * delta_delivered) / delta_reference;
 }
 
 static unsigned int cppc_cpufreq_get_rate(unsigned int cpu)
@@ -391,6 +617,7 @@ static unsigned int cppc_cpufreq_get_rate(unsigned int cpu)
 	struct cppc_perf_fb_ctrs fb_ctrs_t0 = {0}, fb_ctrs_t1 = {0};
 	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
 	struct cppc_cpudata *cpu_data = policy->driver_data;
+	u64 delivered_perf;
 	int ret;
 
 	cpufreq_cpu_put(policy);
@@ -405,7 +632,10 @@ static unsigned int cppc_cpufreq_get_rate(unsigned int cpu)
 	if (ret)
 		return ret;
 
-	return cppc_get_rate_from_fbctrs(cpu_data, fb_ctrs_t0, fb_ctrs_t1);
+	delivered_perf = cppc_perf_from_fbctrs(cpu_data, &fb_ctrs_t0,
+					       &fb_ctrs_t1);
+
+	return cppc_cpufreq_perf_to_khz(cpu_data, delivered_perf);
 }
 
 static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state)
@@ -506,14 +736,21 @@ static void cppc_check_hisi_workaround(void)
 
 static int __init cppc_cpufreq_init(void)
 {
+	int ret;
+
 	if ((acpi_disabled) || !acpi_cpc_valid())
 		return -ENODEV;
 
 	INIT_LIST_HEAD(&cpu_data_list);
 
 	cppc_check_hisi_workaround();
+	cppc_freq_invariance_init();
 
-	return cpufreq_register_driver(&cppc_cpufreq_driver);
+	ret = cpufreq_register_driver(&cppc_cpufreq_driver);
+	if (ret)
+		cppc_freq_invariance_exit();
+
+	return ret;
 }
 
 static inline void free_cpu_data(void)
@@ -531,6 +768,7 @@ static inline void free_cpu_data(void)
 static void __exit cppc_cpufreq_exit(void)
 {
 	cpufreq_unregister_driver(&cppc_cpufreq_driver);
+	cppc_freq_invariance_exit();
 
 	free_cpu_data();
 }

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -15,7 +15,7 @@
  * Machines for which the cpufreq device is *always* created, mostly used for
  * platforms using "operating-points" (V1) property.
  */
-static const struct of_device_id whitelist[] __initconst = {
+static const struct of_device_id allowlist[] __initconst = {
 	{ .compatible = "allwinner,sun4i-a10", },
 	{ .compatible = "allwinner,sun5i-a10s", },
 	{ .compatible = "allwinner,sun5i-a13", },
@@ -100,7 +100,7 @@ static const struct of_device_id whitelist[] __initconst = {
  * Machines for which the cpufreq device is *not* created, mostly used for
  * platforms using "operating-points-v2" property.
  */
-static const struct of_device_id blacklist[] __initconst = {
+static const struct of_device_id blocklist[] __initconst = {
 	{ .compatible = "allwinner,sun50i-h6", },
 
 	{ .compatible = "arm,vexpress", },
@@ -126,6 +126,7 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
 	{ .compatible = "mediatek,mt8183", },
+	{ .compatible = "mediatek,mt8365", },
 	{ .compatible = "mediatek,mt8516", },
 
 	{ .compatible = "nvidia,tegra20", },
@@ -137,6 +138,7 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "qcom,msm8996", },
 	{ .compatible = "qcom,qcs404", },
 	{ .compatible = "qcom,sc7180", },
+	{ .compatible = "qcom,sc7280", },
 	{ .compatible = "qcom,sdm845", },
 
 	{ .compatible = "st,stih407", },
@@ -177,13 +179,13 @@ static int __init cpufreq_dt_platdev_init(void)
 	if (!np)
 		return -ENODEV;
 
-	match = of_match_node(whitelist, np);
+	match = of_match_node(allowlist, np);
 	if (match) {
 		data = match->data;
 		goto create_pdev;
 	}
 
-	if (cpu0_node_has_opp_v2_prop() && !of_match_node(blacklist, np))
+	if (cpu0_node_has_opp_v2_prop() && !of_match_node(blocklist, np))
 		goto create_pdev;
 
 	of_node_put(np);

drivers/cpufreq/mediatek-cpufreq.c

@@ -537,6 +537,7 @@ static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
 	{ .compatible = "mediatek,mt8183", },
+	{ .compatible = "mediatek,mt8365", },
 	{ .compatible = "mediatek,mt8516", },
 
 	{ }

drivers/cpufreq/scmi-cpufreq.c

@@ -174,7 +174,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 		nr_opp = dev_pm_opp_get_opp_count(cpu_dev);
 		if (nr_opp <= 0) {
 			dev_err(cpu_dev, "%s: No OPPs for this device: %d\n",
-				__func__, ret);
+				__func__, nr_opp);
 
 			ret = -ENODEV;
 			goto out_free_opp;

include/dt-bindings/clock/mt8173-clk.h

@@ -186,7 +186,6 @@
 #define CLK_INFRA_PMICWRAP		11
 #define CLK_INFRA_CLK_13M		12
 #define CLK_INFRA_CA53SEL               13
-#define CLK_INFRA_CA57SEL               14 /* Deprecated. Don't use it. */
 #define CLK_INFRA_CA72SEL               14
 #define CLK_INFRA_NR_CLK                15
 

include/linux/arch_topology.h

@@ -37,6 +37,7 @@ bool topology_scale_freq_invariant(void);
 enum scale_freq_source {
 	SCALE_FREQ_SOURCE_CPUFREQ = 0,
 	SCALE_FREQ_SOURCE_ARCH,
+	SCALE_FREQ_SOURCE_CPPC,
 };
 
 struct scale_freq_data {

kernel/sched/core.c

@@ -7182,6 +7182,7 @@ int sched_setattr_nocheck(struct task_struct *p, const struct sched_attr *attr)
 {
 	return __sched_setscheduler(p, attr, false, true);
 }
+EXPORT_SYMBOL_GPL(sched_setattr_nocheck);
 
 /**
  * sched_setscheduler_nocheck - change the scheduling policy and/or RT priority of a thread from kernelspace.