arm64: dts: allwinner: drop underscore in node names

Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.  Use also generic name for pwrseq
node, because generic naming is favored by Devicetree spec.  All the
clocks affected by this change use clock-output-names, so resulting
clock name should not change.  Functional impact checked with comparing
before/after DTBs with dtx_diff and fdtdump.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240317184130.157695-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>

arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts

@@ -53,7 +53,7 @@ led-2 {
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;

arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts

@@ -41,7 +41,7 @@ led {
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";

arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts

@@ -52,7 +52,7 @@ reg_usb1_vbus: usb1-vbus {
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};

arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts

@@ -68,7 +68,7 @@ reg_usb1_vbus: usb1-vbus {
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;

arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts

@@ -79,7 +79,7 @@ reg_vcc5v0: vcc5v0 {
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};

arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts

@@ -98,7 +98,7 @@ vdd_bl: regulator {
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 		post-power-on-delay-ms = <200>;

arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts

@@ -74,7 +74,7 @@ reg_usb1_vbus: usb1-vbus {
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -120,14 +120,14 @@ opp-432000000 {
 		};
 	};
 
-	osc24M: osc24M_clk {
+	osc24M: osc24M-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 		clock-output-names = "osc24M";
 	};
 
-	osc32k: osc32k_clk {
+	osc32k: osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -216,21 +216,21 @@ map1 {
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_alert1: cpu_alert1 {
+				cpu_alert1: cpu-alert1 {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <110000>;
 					hysteresis = <2000>;

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts

@@ -68,7 +68,7 @@ vdd_cpux: gpio-regulator {
 		states = <1100000 0>, <1300000 1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		post-power-on-delay-ms = <200>;

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts

@@ -103,7 +103,7 @@ vdd_cpux: gpio-regulator {
 		states = <1100000 0x0>, <1300000 0x1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		post-power-on-delay-ms = <200>;
@@ -170,7 +170,7 @@ &mmc1 {
 	non-removable;
 	status = "okay";
 
-	rtl8189etv: sdio_wifi@1 {
+	rtl8189etv: wifi@1 {
 		reg = <1>;
 	};
 };

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts

@@ -85,7 +85,7 @@ reg_usb0_vbus: usb0-vbus {
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
 	};

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts

@@ -97,7 +97,7 @@ &mmc1 {
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts

@@ -52,7 +52,7 @@ reg_vcc3v3: vcc3v3 {
 		regulator-max-microvolt = <3300000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;

arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

@@ -34,7 +34,7 @@ hdmi_con_in: endpoint {
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts

@@ -33,7 +33,7 @@ hdmi_con_in: endpoint {
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts

@@ -11,7 +11,7 @@ aliases {
 		serial1 = &uart1; /* BT-UART */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi

@@ -32,7 +32,7 @@ hdmi_con_in: endpoint {
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;

arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts

@@ -11,7 +11,7 @@ / {
 	model = "Pine H64 model B";
 	compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
 		post-power-on-delay-ms = <200>;

arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts

@@ -22,7 +22,7 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;

arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi

@@ -68,7 +68,7 @@ de: display-engine {
 		status = "disabled";
 	};
 
-	osc24M: osc24M_clk {
+	osc24M: osc24M-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;

arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts

@@ -41,7 +41,7 @@ reg_vcc3v3: vcc3v3 {
 		regulator-always-on;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";

arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts

@@ -42,7 +42,7 @@ reg_vcc5v: regulator-5v {
 		regulator-always-on;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 		post-power-on-delay-ms = <200>;