xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too

When Xen domain configures MSI-X, the usual approach is to enable MSI-X
together with masking all of them via the config space, then fill the
table and only then clear PCI_MSIX_FLAGS_MASKALL. Allow doing this via
QEMU running in a stub domain.

Previously, when changing PCI_MSIX_FLAGS_MASKALL was not allowed, the
whole write was aborted, preventing change to the PCI_MSIX_FLAGS_ENABLE
bit too.

Note the Xen hypervisor intercepts this write anyway, and may keep the
PCI_MSIX_FLAGS_MASKALL bit set if it wishes to. It will store the
guest-requested state and will apply it eventually.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20221114103110.1519413-1-marmarek@invisiblethingslab.comSigned-off-by: Juergen Gross <jgross@suse.com>

drivers/xen/xen-pciback/conf_space_capability.c

@@ -191,12 +191,15 @@ static const struct config_field caplist_pm[] = {
 
 static struct msi_msix_field_config {
 	u16          enable_bit;   /* bit for enabling MSI/MSI-X */
+	u16          allowed_bits; /* bits allowed to be changed */
 	unsigned int int_type;     /* interrupt type for exclusiveness check */
 } msi_field_config = {
 	.enable_bit	= PCI_MSI_FLAGS_ENABLE,
+	.allowed_bits	= PCI_MSI_FLAGS_ENABLE,
 	.int_type	= INTERRUPT_TYPE_MSI,
 }, msix_field_config = {
 	.enable_bit	= PCI_MSIX_FLAGS_ENABLE,
+	.allowed_bits	= PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL,
 	.int_type	= INTERRUPT_TYPE_MSIX,
 };
 
@@ -229,7 +232,7 @@ static int msi_msix_flags_write(struct pci_dev *dev, int offset, u16 new_value,
 		return 0;
 
 	if (!dev_data->allow_interrupt_control ||
-	    (new_value ^ old_value) & ~field_config->enable_bit)
+	    (new_value ^ old_value) & ~field_config->allowed_bits)
 		return PCIBIOS_SET_FAILED;
 
 	if (new_value & field_config->enable_bit) {