Commit 5e7c58dc authored by Jean Pihet's avatar Jean Pihet Committed by Kevin Hilman

perf: add OMAP support for the new power events

The patch adds the new power management trace points for
the OMAP architecture.

The trace points are for:
- default idle handler. Since the cpuidle framework is
  instrumented in the generic way there is no need to
  add trace points in the OMAP specific cpuidle handler;
- SoC clocks changes (enable, disable, set_rate),
- power domain states: the desired target state and -if different-
  the actually hit state.

Because of the generic nature of the changes, OMAP3 and OMAP4 are supported.

Tested on OMAP3 with suspend/resume, cpuidle, basic DVFS.
Signed-off-by: default avatarJean Pihet <j-pihet@ti.com>
Acked-by: default avatarPaul Walmsley <paul@pwsan.com>
Signed-off-by: default avatarKevin Hilman <khilman@ti.com>
parent a271e58c
......@@ -22,7 +22,9 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <trace/events/power.h>
#include <asm/cpu.h>
#include <plat/clock.h>
#include "clockdomain.h"
#include <plat/cpu.h>
......@@ -261,8 +263,10 @@ void omap2_clk_disable(struct clk *clk)
pr_debug("clock: %s: disabling in hardware\n", clk->name);
if (clk->ops && clk->ops->disable)
if (clk->ops && clk->ops->disable) {
trace_clock_disable(clk->name, 0, smp_processor_id());
clk->ops->disable(clk);
}
if (clk->clkdm)
clkdm_clk_disable(clk->clkdm, clk);
......@@ -314,6 +318,7 @@ int omap2_clk_enable(struct clk *clk)
}
if (clk->ops && clk->ops->enable) {
trace_clock_enable(clk->name, 1, smp_processor_id());
ret = clk->ops->enable(clk);
if (ret) {
WARN(1, "clock: %s: could not enable: %d\n",
......@@ -353,8 +358,10 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
if (clk->set_rate)
if (clk->set_rate) {
trace_clock_set_rate(clk->name, rate, smp_processor_id());
ret = clk->set_rate(clk, rate);
}
return ret;
}
......
......@@ -29,6 +29,7 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/console.h>
#include <trace/events/power.h>
#include <plat/sram.h>
#include "clockdomain.h"
......@@ -519,8 +520,14 @@ static void omap3_pm_idle(void)
if (omap_irq_pending() || need_resched())
goto out;
trace_power_start(POWER_CSTATE, 1, smp_processor_id());
trace_cpu_idle(1, smp_processor_id());
omap_sram_idle();
trace_power_end(smp_processor_id());
trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
out:
local_fiq_enable();
local_irq_enable();
......
......@@ -19,12 +19,15 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <trace/events/power.h>
#include "cm2xxx_3xxx.h"
#include "prcm44xx.h"
#include "cm44xx.h"
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include <asm/cpu.h>
#include <plat/cpu.h>
#include "powerdomain.h"
#include "clockdomain.h"
......@@ -32,6 +35,8 @@
#include "pm.h"
#define PWRDM_TRACE_STATES_FLAG (1<<31)
enum {
PWRDM_STATE_NOW = 0,
PWRDM_STATE_PREV,
......@@ -130,8 +135,7 @@ static void _update_logic_membank_counters(struct powerdomain *pwrdm)
static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
{
int prev;
int state;
int prev, state, trace_state = 0;
if (pwrdm == NULL)
return -EINVAL;
......@@ -148,6 +152,17 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
pwrdm->state_counter[prev]++;
if (prev == PWRDM_POWER_RET)
_update_logic_membank_counters(pwrdm);
/*
* If the power domain did not hit the desired state,
* generate a trace event with both the desired and hit states
*/
if (state != prev) {
trace_state = (PWRDM_TRACE_STATES_FLAG |
((state & OMAP_POWERSTATE_MASK) << 8) |
((prev & OMAP_POWERSTATE_MASK) << 0));
trace_power_domain_target(pwrdm->name, trace_state,
smp_processor_id());
}
break;
default:
return -EINVAL;
......@@ -406,8 +421,13 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
pwrdm->name, pwrst);
if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst)
if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
/* Trace the pwrdm desired target state */
trace_power_domain_target(pwrdm->name, pwrst,
smp_processor_id());
/* Program the pwrdm desired target state */
ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
}
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment