Commit 5f07da89 authored by Jakub Kicinski's avatar Jakub Kicinski

net: sb1000,rionet: use eth_hw_addr_set()

Get these two oldies ready for constant netdev->dev_addr.
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 7996acff
...@@ -482,6 +482,7 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev) ...@@ -482,6 +482,7 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev)
{ {
int rc = 0; int rc = 0;
struct rionet_private *rnet; struct rionet_private *rnet;
u8 addr[ETH_ALEN];
u16 device_id; u16 device_id;
const size_t rionet_active_bytes = sizeof(void *) * const size_t rionet_active_bytes = sizeof(void *) *
RIO_MAX_ROUTE_ENTRIES(mport->sys_size); RIO_MAX_ROUTE_ENTRIES(mport->sys_size);
...@@ -501,12 +502,13 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev) ...@@ -501,12 +502,13 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev)
/* Set the default MAC address */ /* Set the default MAC address */
device_id = rio_local_get_device_id(mport); device_id = rio_local_get_device_id(mport);
ndev->dev_addr[0] = 0x00; addr[0] = 0x00;
ndev->dev_addr[1] = 0x01; addr[1] = 0x01;
ndev->dev_addr[2] = 0x00; addr[2] = 0x00;
ndev->dev_addr[3] = 0x01; addr[3] = 0x01;
ndev->dev_addr[4] = device_id >> 8; addr[4] = device_id >> 8;
ndev->dev_addr[5] = device_id & 0xff; addr[5] = device_id & 0xff;
eth_hw_addr_set(ndev, addr);
ndev->netdev_ops = &rionet_netdev_ops; ndev->netdev_ops = &rionet_netdev_ops;
ndev->mtu = RIONET_MAX_MTU; ndev->mtu = RIONET_MAX_MTU;
......
...@@ -149,6 +149,7 @@ sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id) ...@@ -149,6 +149,7 @@ sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id)
unsigned short ioaddr[2], irq; unsigned short ioaddr[2], irq;
unsigned int serial_number; unsigned int serial_number;
int error = -ENODEV; int error = -ENODEV;
u8 addr[ETH_ALEN];
if (pnp_device_attach(pdev) < 0) if (pnp_device_attach(pdev) < 0)
return -ENODEV; return -ENODEV;
...@@ -203,10 +204,13 @@ sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id) ...@@ -203,10 +204,13 @@ sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id)
dev->netdev_ops = &sb1000_netdev_ops; dev->netdev_ops = &sb1000_netdev_ops;
/* hardware address is 0:0:serial_number */ /* hardware address is 0:0:serial_number */
dev->dev_addr[2] = serial_number >> 24 & 0xff; addr[0] = 0;
dev->dev_addr[3] = serial_number >> 16 & 0xff; addr[1] = 0;
dev->dev_addr[4] = serial_number >> 8 & 0xff; addr[2] = serial_number >> 24 & 0xff;
dev->dev_addr[5] = serial_number >> 0 & 0xff; addr[3] = serial_number >> 16 & 0xff;
addr[4] = serial_number >> 8 & 0xff;
addr[5] = serial_number >> 0 & 0xff;
eth_hw_addr_set(dev, addr);
pnp_set_drvdata(pdev, dev); pnp_set_drvdata(pdev, dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment