[PATCH] USB: New ID for ftdi_sio

Hi,
I have an USB contactless reader which uses a FTDI chip. It works well with the
 current ftdi_sio driver, it's just a matter of adding an ID:

drivers/usb/serial/ftdi_sio.c

@@ -354,6 +354,7 @@ static struct usb_device_id id_table_8U232AM [] = {
 	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) },
+	{ USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) },
 	{ }						/* Terminating entry */
 };
 
@@ -558,6 +559,7 @@ static struct usb_device_id id_table_combined [] = {
  	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_1_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_2_PID, 0x400, 0xffff) },
+	{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
 	{ }						/* Terminating entry */
 };
 

drivers/usb/serial/ftdi_sio.h

@@ -191,6 +191,9 @@
 #define LINX_FUTURE_1_PID   0xF44B   /* Linx future device */
 #define LINX_FUTURE_2_PID   0xF44C   /* Linx future device */
 
+/* Inside Accesso contactless reader (http://www.insidefr.com) */
+#define INSIDE_ACCESSO		0xFAD0
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */