Commit 5f96ba56 authored by Hans de Goede's avatar Hans de Goede Committed by Rafael J. Wysocki

ACPI: PMIC: xpower: Fix _TMP ACPI errors

On some devices with a X-Powers AXP288 PMIC the LPAT tables in the ACPI
node for the AXP288 PMIC for some reason only describe a small temperature
range, e.g. 27° - 37° Celcius (assuming the entries are in millidegrees).

When the tablet is idle in a room at 21° degrees this is causing values
outside the LPAT table to be read, causing e.g. the following 2 errors
to get spammed to the logs every 4 seconds! :

[ 7512.791316] ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20210930/evregion-281)
[ 7512.791611] ACPI Error: Aborting method \_SB.SXP1._TMP due to previous error (AE_ERROR) (20210930/psparse-529)

Fix this by clamping the raw value to the LPAT table range before
passing it to acpi_lpat_raw_to_temp().

Note clamping has been chosen rather then extrapolating because it is
unknown how other parts of the ACPI tables will respond to temperature
values outside of the LPAT range.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent c5200609
......@@ -293,12 +293,33 @@ static int intel_xpower_exec_mipi_pmic_seq_element(struct regmap *regmap,
return ret;
}
static int intel_xpower_lpat_raw_to_temp(struct acpi_lpat_conversion_table *lpat_table,
int raw)
{
struct acpi_lpat first = lpat_table->lpat[0];
struct acpi_lpat last = lpat_table->lpat[lpat_table->lpat_count - 1];
/*
* Some LPAT tables in the ACPI Device for the AXP288 PMIC for some
* reason only describe a small temperature range, e.g. 27° - 37°
* Celcius. Resulting in errors when the tablet is idle in a cool room.
*
* To avoid these errors clamp the raw value to be inside the LPAT.
*/
if (first.raw < last.raw)
raw = clamp(raw, first.raw, last.raw);
else
raw = clamp(raw, last.raw, first.raw);
return acpi_lpat_raw_to_temp(lpat_table, raw);
}
static const struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {
.get_power = intel_xpower_pmic_get_power,
.update_power = intel_xpower_pmic_update_power,
.get_raw_temp = intel_xpower_pmic_get_raw_temp,
.exec_mipi_pmic_seq_element = intel_xpower_exec_mipi_pmic_seq_element,
.lpat_raw_to_temp = acpi_lpat_raw_to_temp,
.lpat_raw_to_temp = intel_xpower_lpat_raw_to_temp,
.power_table = power_table,
.power_table_count = ARRAY_SIZE(power_table),
.thermal_table = thermal_table,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment