Commit 5ffe04cc authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Another smaller set of fixes for three of the Arm platforms:

  TI OMAP:

     Fix swapped mmc device order also for omap3 that got changed with
     the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
     aliases should be board specific, all the mmc device instances are
     all there in the SoC, and we do probe them by default so that PM
     runtime can idle the devices if left enabled from the bootloader.

  Qualcomm Snapdragon:

     This bypasses the recently introduced interconnect handling in
     the GENI (serial engine) driver when running off ACPI, as this
     causes the GENI probe to fail and the Lenovo Yoga C630 to boot
     without keyboard and touchpad.

  Allwinner:

     One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
     SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
     our headers"

* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
  MAINTAINERS: Match on allwinner keyword
  MAINTAINERS: Add our new mailing-list
  arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
  arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
  ARM: OMAP2+: Fix uninitialized sr_inst
  ARM: dts: Fix swapped mmc order for omap3
  ARM: OMAP2+: Fix warning for omap_init_time_of()
  soc: qcom: geni: shield geni_icc_get() for ACPI boot
parents f5ce0466 b9a9786a
......@@ -1576,11 +1576,13 @@ R: Jernej Skrabec <jernej.skrabec@siol.net>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
L: linux-sunxi@lists.linux.dev
F: arch/arm/mach-sunxi/
F: arch/arm64/boot/dts/allwinner/
F: drivers/clk/sunxi-ng/
F: drivers/pinctrl/sunxi/
F: drivers/soc/sunxi/
N: allwinner
N: sun[x456789]i
N: sun50i
......
......@@ -24,6 +24,9 @@ aliases {
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
mmc0 = &mmc1;
mmc1 = &mmc2;
mmc2 = &mmc3;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
......
......@@ -33,7 +33,7 @@ static void __init __maybe_unused omap_generic_init(void)
}
/* Clocks are needed early, see drivers/clocksource for the rest */
void __init __maybe_unused omap_init_time_of(void)
static void __init __maybe_unused omap_init_time_of(void)
{
omap_clk_init();
timer_probe();
......
......@@ -188,7 +188,7 @@ static const char * const dra7_sr_instances[] = {
int __init omap_devinit_smartreflex(void)
{
const char * const *sr_inst;
const char * const *sr_inst = NULL;
int i, nr_sr = 0;
if (soc_is_omap44xx()) {
......
......@@ -19,3 +19,7 @@ led {
};
};
};
&mmc0 {
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 push-push switch */
};
......@@ -34,7 +34,7 @@ &mmc0 {
vmmc-supply = <&reg_dcdc1>;
disable-wp;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */
status = "okay";
};
......
......@@ -289,10 +289,6 @@ &r_pio {
vcc-pm-supply = <&reg_aldo1>;
};
&rtc {
clocks = <&ext_osc32k>;
};
&spdif {
status = "okay";
};
......
......@@ -995,9 +995,9 @@ r_rsb: rsb@7083000 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x07083000 0x400>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu 13>;
clocks = <&r_ccu CLK_R_APB2_RSB>;
clock-frequency = <3000000>;
resets = <&r_ccu 7>;
resets = <&r_ccu RST_R_APB2_RSB>;
pinctrl-names = "default";
pinctrl-0 = <&r_rsb_pins>;
status = "disabled";
......
......@@ -756,6 +756,9 @@ int geni_icc_get(struct geni_se *se, const char *icc_ddr)
int i, err;
const char *icc_names[] = {"qup-core", "qup-config", icc_ddr};
if (has_acpi_companion(se->dev))
return 0;
for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) {
if (!icc_names[i])
continue;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment