Skip to content

L
linux
Commit 601cc57e authored by Dave Jones's avatar Dave Jones Committed by Jeff Garzik
Browse files
Options

Merge ariadne2 net drvr updates from 2.4.x: 

* use Zorro-specific z_{read,write}[bwl] routines
* remove superfluous include
parent f133d9cf
Hide whitespace changes
Inline Side-by-side
Showing with 41 additions and 41 deletions
drivers/net/ariadne2.c
View file @ 601cc57e
......@@ -30,7 +30,7 @@
#include <linux/zorro.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
......@@ -142,15 +142,15 @@ static int __init ariadne2_init(struct net_device *dev, unsigned long board,
{
unsigned long reset_start_time = jiffies;
writeb(readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
while ((readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
if (jiffies - reset_start_time > 2*HZ/100) {
printk(" not found (no reset ack).\n");
return -ENODEV;
}
writeb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */
z_writeb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */
}
/* Read the 16 bytes of station address PROM.
......@@ -177,16 +177,16 @@ static int __init ariadne2_init(struct net_device *dev, unsigned long board,
{E8390_RREAD+E8390_START, NE_CMD},
};
for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++) {
writeb(program_seq[i].value, ioaddr + program_seq[i].offset);
z_writeb(program_seq[i].value, ioaddr + program_seq[i].offset);
}
}
for (i = 0; i < 16; i++) {
SA_prom[i] = readb(ioaddr + NE_DATAPORT);
(void)readb(ioaddr + NE_DATAPORT);
SA_prom[i] = z_readb(ioaddr + NE_DATAPORT);
(void)z_readb(ioaddr + NE_DATAPORT);
}
/* We must set the 8390 for word mode. */
writeb(0x49, ioaddr + NE_EN0_DCFG);
z_writeb(0x49, ioaddr + NE_EN0_DCFG);
start_page = NESM_START_PG;
stop_page = NESM_STOP_PG;
......@@ -260,18 +260,18 @@ static void ariadne2_reset_8390(struct net_device *dev)
if (ei_debug > 1)
printk("resetting the 8390 t=%ld...", jiffies);
writeb(readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
ei_status.txing = 0;
ei_status.dmaing = 0;
/* This check _should_not_ be necessary, omit eventually. */
while ((readb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
while ((z_readb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
if (jiffies - reset_start_time > 2*HZ/100) {
printk("%s: ne_reset_8390() did not complete.\n", dev->name);
break;
}
writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */
z_writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */
}
/* Grab the 8390 specific header. Similar to the block_input routine, but
......@@ -294,19 +294,19 @@ static void ariadne2_get_8390_hdr(struct net_device *dev,
}
ei_status.dmaing |= 0x01;
writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
writeb(0, nic_base + NE_EN0_RCNTHI);
writeb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */
writeb(ring_page, nic_base + NE_EN0_RSARHI);
writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
z_writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
z_writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
z_writeb(0, nic_base + NE_EN0_RCNTHI);
z_writeb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */
z_writeb(ring_page, nic_base + NE_EN0_RSARHI);
z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
ptrs = (short*)hdr;
for (cnt = 0; cnt < (sizeof(struct e8390_pkt_hdr)>>1); cnt++)
*ptrs++ = readw(NE_BASE + NE_DATAPORT);
*ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
hdr->count = WORDSWAP(hdr->count);
......@@ -316,7 +316,7 @@ static void ariadne2_get_8390_hdr(struct net_device *dev,
/* Block input and output, similar to the Crynwr packet driver. If you
are porting to a new ethercard, look at the packet driver source for hints.
The NEx000 doesn't share the on-board packet memory -- you have to put
the packet out through the "remote DMA" dataport using writeb. */
the packet out through the "remote DMA" dataport using z_writeb. */
static void ariadne2_block_input(struct net_device *dev, int count,
struct sk_buff *skb, int ring_offset)
......@@ -334,20 +334,20 @@ static void ariadne2_block_input(struct net_device *dev, int count,
return;
}
ei_status.dmaing |= 0x01;
writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
z_writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
z_writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
z_writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
ptrs = (short*)buf;
for (cnt = 0; cnt < (count>>1); cnt++)
*ptrs++ = readw(NE_BASE + NE_DATAPORT);
*ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
if (count & 0x01)
buf[count-1] = readb(NE_BASE + NE_DATAPORT);
buf[count-1] = z_readb(NE_BASE + NE_DATAPORT);
writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
ei_status.dmaing &= ~0x01;
}
......@@ -375,24 +375,24 @@ static void ariadne2_block_output(struct net_device *dev, int count,
}
ei_status.dmaing |= 0x01;
/* We should already be in page 0, but to be safe... */
writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
z_writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
/* Now the normal output. */
writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
writeb(0x00, nic_base + NE_EN0_RSARLO);
writeb(start_page, nic_base + NE_EN0_RSARHI);
z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
z_writeb(0x00, nic_base + NE_EN0_RSARLO);
z_writeb(start_page, nic_base + NE_EN0_RSARHI);
writeb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
z_writeb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
ptrs = (short*)buf;
for (cnt = 0; cnt < count>>1; cnt++)
writew(*ptrs++, NE_BASE+NE_DATAPORT);
z_writew(*ptrs++, NE_BASE+NE_DATAPORT);
dma_start = jiffies;
while ((readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
printk("%s: timeout waiting for Tx RDC.\n", dev->name);
ariadne2_reset_8390(dev);
......@@ -400,7 +400,7 @@ static void ariadne2_block_output(struct net_device *dev, int count,
break;
}
writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
ei_status.dmaing &= ~0x01;
return;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7