Commit 6032afbd authored by Jonathan Cameron's avatar Jonathan Cameron

dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.

I don't have an up to date address for Adriana Reus so I've put myself
as the binding maintainer for this one.  I'm happy to hand over to Adriana
or anyone else who wants take it on!

This has a lot of optional tuning parameters. The docs are modified to try
and put the default values in the description of each one rather than a
forwards reference to the example.
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031184854.745828-20-jic23@kernel.org
parent 23205227
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/light/upisemi,us5182.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: UPISEMI us5182d I2C ALS and Proximity sensor
maintainers:
- Jonathan Cameron <jic23@kernel.org>
properties:
compatible:
const: upisemi,asd5182
reg:
maxItems: 1
upsemi,glass-coef:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
glass attenuation factor - compensation factor of resolution 1000
for material transmittance.
default: 1000
upisemi,dark-ths:
$ref: /schemas/types.yaml#/definitions/uint16-array
minItems: 8
maxItems: 8
description:
16-bit thresholds (adc counts) corresponding to every scale.
upisemi,upper-dark-gain:
$ref: /schemas/types.yaml#/definitions/uint8
description: |
8-bit dark gain compensation factor(4 int and 4 fractional bits - Q4.4)
applied when light > threshold.
default: 0
upisemi,lower-dark-gain:
$ref: /schemas/types.yaml#/definitions/uint8
description: |
8-bit dark gain compensation factor(4 int and 4 fractional bits - Q4.4)
applied when light < threshold.
default: 0x16
upisemi,continuous:
$ref: /schemas/types.yaml#definitions/flag
description: |
This chip has two power modes: one-shot (chip takes one measurement and
then shuts itself down) and continuous (chip takes continuous
measurements). The one-shot mode is more power-friendly but the
continuous mode may be more reliable. If this property is specified
the continuous mode will be used instead of the default one-shot one for
raw reads.
additionalProperties: false
required:
- compatible
- reg
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
light-sensor@39 {
compatible = "upisemi,usd5182";
reg = <0x39>;
upisemi,glass-coef = < 1000 >;
upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>;
upisemi,upper-dark-gain = /bits/ 8 <0x00>;
upisemi,lower-dark-gain = /bits/ 8 <0x16>;
};
};
...
* UPISEMI us5182d I2C ALS and Proximity sensor
Required properties:
- compatible: must be "upisemi,usd5182"
- reg: the I2C address of the device
Optional properties:
- upisemi,glass-coef: glass attenuation factor - compensation factor of
resolution 1000 for material transmittance.
- upisemi,dark-ths: array of 8 elements containing 16-bit thresholds (adc
counts) corresponding to every scale.
- upisemi,upper-dark-gain: 8-bit dark gain compensation factor(4 int and 4
fractional bits - Q4.4) applied when light > threshold
- upisemi,lower-dark-gain: 8-bit dark gain compensation factor(4 int and 4
fractional bits - Q4.4) applied when light < threshold
- upisemi,continuous: This chip has two power modes: one-shot (chip takes one
measurement and then shuts itself down) and continuous (
chip takes continuous measurements). The one-shot mode is
more power-friendly but the continuous mode may be more
reliable. If this property is specified the continuous
mode will be used instead of the default one-shot one for
raw reads.
If the optional properties are not specified these factors will default to the
values in the below example.
The glass-coef defaults to no compensation for the covering material.
The threshold array defaults to experimental values that work with US5182D
sensor on evaluation board - roughly between 12-32 lux.
There will be no dark-gain compensation by default when ALS > thresh
(0 * dark-gain), and a 1.35 compensation factor when ALS < thresh.
Example:
usd5182@39 {
compatible = "upisemi,usd5182";
reg = <0x39>;
upisemi,glass-coef = < 1000 >;
upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>;
upisemi,upper-dark-gain = /bits/ 8 <0x00>;
upisemi,lower-dark-gain = /bits/ 8 <0x16>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment