ARM: dts: am57xx: sbc-am57x: add EEPROM support

On-board EEPROM chip is used for storing a board production info.

Add carrier board EEPROM support (over I2C5 bus).
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am57xx-sbc-am57x.dts

@@ -43,6 +43,13 @@ usb1_pins: pinmux_usb1_pins {
 			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 		>;
 	};
+
+	i2c5_pins_default: i2c5_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr1.i2c5_scl */
+		>;
+	};
 };
 
 &uart3 {
@@ -70,3 +77,16 @@ &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_pins>;
 };
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom_base: atmel@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};