arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K

This commit adds the description of the PPv2.2 hardware block for the
Marvell Armada 7K and Armada 8K processors, and their corresponding Armada
7040 and 8040 Development boards.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm64/boot/dts/marvell/armada-7040-db.dts

@@ -146,3 +146,28 @@ &cpm_usb3_0 {
 &cpm_usb3_1 {
 	status = "okay";
 };
+
+&cpm_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpm_ethernet {
+	status = "okay";
+};
+
+&cpm_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "sgmii";
+};
+
+&cpm_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};

arch/arm64/boot/dts/marvell/armada-8040-db.dts

@@ -124,6 +124,22 @@ &cpm_usb3_1 {
 	status = "okay";
 };
 
+&cpm_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpm_ethernet {
+	status = "okay";
+};
+
+&cpm_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
+
 /* CON5 on CP1 expansion */
 &cps_pcie2 {
 	status = "okay";

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -59,6 +59,43 @@ config-space@f2000000 {
 			interrupt-parent = <&gic>;
 			ranges = <0x0 0x0 0xf2000000 0x2000000>;
 
+			cpm_ethernet: ethernet@0 {
+				compatible = "marvell,armada-7k-pp22";
+				reg = <0x0 0x100000>, <0x129000 0xb000>;
+				clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
+				clock-names = "pp_clk", "gop_clk", "mg_clk";
+				status = "disabled";
+				dma-coherent;
+
+				cpm_eth0: eth0 {
+					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <0>;
+					gop-port-id = <0>;
+					status = "disabled";
+				};
+
+				cpm_eth1: eth1 {
+					interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <1>;
+					gop-port-id = <2>;
+					status = "disabled";
+				};
+
+				cpm_eth2: eth2 {
+					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <2>;
+					gop-port-id = <3>;
+					status = "disabled";
+				};
+			};
+
+			cpm_mdio: mdio@12a200 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x12a200 0x10>;
+			};
+
 			cpm_syscon0: system-controller@440000 {
 				compatible = "marvell,cp110-system-controller0",
 					     "syscon";

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -66,6 +66,43 @@ cps_rtc: rtc@284000 {
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
+			cps_ethernet: ethernet@0 {
+				compatible = "marvell,armada-7k-pp22";
+				reg = <0x0 0x100000>, <0x129000 0xb000>;
+				clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
+				clock-names = "pp_clk", "gop_clk", "mg_clk";
+				status = "disabled";
+				dma-coherent;
+
+				cps_eth0: eth0 {
+					interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <0>;
+					gop-port-id = <0>;
+					status = "disabled";
+				};
+
+				cps_eth1: eth1 {
+					interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <1>;
+					gop-port-id = <2>;
+					status = "disabled";
+				};
+
+				cps_eth2: eth2 {
+					interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <2>;
+					gop-port-id = <3>;
+					status = "disabled";
+				};
+			};
+
+			cps_mdio: mdio@12a200 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x12a200 0x10>;
+			};
+
 			cps_syscon0: system-controller@440000 {
 				compatible = "marvell,cp110-system-controller0",
 					     "syscon";