regulator: use linear_ranges helper

Change the regulator helpers to use common linear_ranges code.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/88pg86x.c

@@ -11,13 +11,13 @@ static const struct regulator_ops pg86x_ops = {
 	.list_voltage = regulator_list_voltage_linear_range,
 };
 
-static const struct regulator_linear_range pg86x_buck1_ranges[] = {
+static const struct linear_range pg86x_buck1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(      0,  0, 10,     0),
 	REGULATOR_LINEAR_RANGE(1000000, 11, 34, 25000),
 	REGULATOR_LINEAR_RANGE(1600000, 35, 47, 50000),
 };
 
-static const struct regulator_linear_range pg86x_buck2_ranges[] = {
+static const struct linear_range pg86x_buck2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(      0,  0, 15,     0),
 	REGULATOR_LINEAR_RANGE(1000000, 16, 39, 25000),
 	REGULATOR_LINEAR_RANGE(1600000, 40, 52, 50000),

drivers/regulator/88pm800-regulator.c

@@ -134,13 +134,13 @@ struct pm800_regulator_info {
 }
 
 /* Ranges are sorted in ascending order. */
-static const struct regulator_linear_range buck1_volt_range[] = {
+static const struct linear_range buck1_volt_range[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500),
 	REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x54, 50000),
 };
 
 /* BUCK 2~5 have same ranges. */
-static const struct regulator_linear_range buck2_5_volt_range[] = {
+static const struct linear_range buck2_5_volt_range[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500),
 	REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x72, 50000),
 };

drivers/regulator/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig REGULATOR
 	bool "Voltage and Current Regulator Support"
+	select LINEAR_RANGES
 	help
 	  Generic Voltage and Current Regulator support.
 

drivers/regulator/act8865-regulator.c

@@ -220,13 +220,13 @@ static const struct regmap_config act8865_regmap_config = {
 	.val_bits = 8,
 };
 
-static const struct regulator_linear_range act8865_voltage_ranges[] = {
+static const struct linear_range act8865_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
 	REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
 	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
 };
 
-static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
+static const struct linear_range act8600_sudcdc_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
 	REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
 	REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),

drivers/regulator/act8945a-regulator.c

@@ -73,7 +73,7 @@ struct act8945a_pmic {
 	u32 op_mode[ACT8945A_ID_MAX];
 };
 
-static const struct regulator_linear_range act8945a_voltage_ranges[] = {
+static const struct linear_range act8945a_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
 	REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
 	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),

drivers/regulator/arizona-ldo1.c

@@ -87,7 +87,7 @@ static const struct regulator_ops arizona_ldo1_hc_ops = {
 	.set_bypass = regulator_set_bypass_regmap,
 };
 
-static const struct regulator_linear_range arizona_ldo1_hc_ranges[] = {
+static const struct linear_range arizona_ldo1_hc_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 0x6, 50000),
 	REGULATOR_LINEAR_RANGE(1800000, 0x7, 0x7, 0),
 };

drivers/regulator/arizona-micsupp.c

@@ -125,7 +125,7 @@ static const struct regulator_ops arizona_micsupp_ops = {
 	.set_bypass = arizona_micsupp_set_bypass,
 };
 
-static const struct regulator_linear_range arizona_micsupp_ranges[] = {
+static const struct linear_range arizona_micsupp_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0,    0x1e, 50000),
 	REGULATOR_LINEAR_RANGE(3300000, 0x1f, 0x1f, 0),
 };
@@ -152,7 +152,7 @@ static const struct regulator_desc arizona_micsupp = {
 	.owner = THIS_MODULE,
 };
 
-static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = {
+static const struct linear_range arizona_micsupp_ext_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000,  0,    0x14, 25000),
 	REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000),
 };

drivers/regulator/as3711-regulator.c

@@ -103,18 +103,18 @@ static const struct regulator_ops as3711_dldo_ops = {
 	.map_voltage		= regulator_map_voltage_linear_range,
 };
 
-static const struct regulator_linear_range as3711_sd_ranges[] = {
+static const struct linear_range as3711_sd_ranges[] = {
 	REGULATOR_LINEAR_RANGE(612500, 0x1, 0x40, 12500),
 	REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000),
 	REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7f, 50000),
 };
 
-static const struct regulator_linear_range as3711_aldo_ranges[] = {
+static const struct linear_range as3711_aldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0, 0xf, 50000),
 	REGULATOR_LINEAR_RANGE(1800000, 0x10, 0x1f, 100000),
 };
 
-static const struct regulator_linear_range as3711_dldo_ranges[] = {
+static const struct linear_range as3711_dldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 0x10, 50000),
 	REGULATOR_LINEAR_RANGE(1750000, 0x20, 0x3f, 50000),
 };

drivers/regulator/as3722-regulator.c

@@ -389,7 +389,7 @@ static const struct regulator_ops as3722_ldo6_extcntrl_ops = {
 	.set_bypass = regulator_set_bypass_regmap,
 };
 
-static const struct regulator_linear_range as3722_ldo_ranges[] = {
+static const struct linear_range as3722_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0),
 	REGULATOR_LINEAR_RANGE(825000, 0x01, 0x24, 25000),
 	REGULATOR_LINEAR_RANGE(1725000, 0x40, 0x7F, 25000),
@@ -487,7 +487,7 @@ static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs)
 	return false;
 }
 
-static const struct regulator_linear_range as3722_sd2345_ranges[] = {
+static const struct linear_range as3722_sd2345_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0),
 	REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500),
 	REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000),

drivers/regulator/axp20x-regulator.c

@@ -510,7 +510,7 @@ static const struct regulator_ops axp20x_ops_sw = {
 	.is_enabled		= regulator_is_enabled_regmap,
 };
 
-static const struct regulator_linear_range axp20x_ldo4_ranges[] = {
+static const struct linear_range axp20x_ldo4_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1250000,
 			       AXP20X_LDO4_V_OUT_1250mV_START,
 			       AXP20X_LDO4_V_OUT_1250mV_END,
@@ -638,7 +638,7 @@ static const struct regulator_desc axp22x_drivevbus_regulator = {
 };
 
 /* DCDC ranges shared with AXP813 */
-static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
+static const struct linear_range axp803_dcdc234_ranges[] = {
 	REGULATOR_LINEAR_RANGE(500000,
 			       AXP803_DCDC234_500mV_START,
 			       AXP803_DCDC234_500mV_END,
@@ -649,7 +649,7 @@ static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
 			       20000),
 };
 
-static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
+static const struct linear_range axp803_dcdc5_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000,
 			       AXP803_DCDC5_800mV_START,
 			       AXP803_DCDC5_800mV_END,
@@ -660,7 +660,7 @@ static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
 			       20000),
 };
 
-static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
+static const struct linear_range axp803_dcdc6_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000,
 			       AXP803_DCDC6_600mV_START,
 			       AXP803_DCDC6_600mV_END,
@@ -672,7 +672,7 @@ static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
 };
 
 /* AXP806's CLDO2 and AXP809's DLDO1 share the same range */
-static const struct regulator_linear_range axp803_dldo2_ranges[] = {
+static const struct linear_range axp803_dldo2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(700000,
 			       AXP803_DLDO2_700mV_START,
 			       AXP803_DLDO2_700mV_END,
@@ -758,7 +758,7 @@ static const struct regulator_desc axp803_regulators[] = {
 	AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc-ldo", "ips", 3000),
 };
 
-static const struct regulator_linear_range axp806_dcdca_ranges[] = {
+static const struct linear_range axp806_dcdca_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000,
 			       AXP806_DCDCA_600mV_START,
 			       AXP806_DCDCA_600mV_END,
@@ -769,7 +769,7 @@ static const struct regulator_linear_range axp806_dcdca_ranges[] = {
 			       20000),
 };
 
-static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
+static const struct linear_range axp806_dcdcd_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000,
 			       AXP806_DCDCD_600mV_START,
 			       AXP806_DCDCD_600mV_END,
@@ -834,7 +834,7 @@ static const struct regulator_desc axp806_regulators[] = {
 		    AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_SW_MASK),
 };
 
-static const struct regulator_linear_range axp809_dcdc4_ranges[] = {
+static const struct linear_range axp809_dcdc4_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000,
 			       AXP809_DCDC4_600mV_START,
 			       AXP809_DCDC4_600mV_END,

drivers/regulator/bcm590xx-regulator.c

@@ -116,14 +116,14 @@ static const unsigned int ldo_vbus[] = {
 };
 
 /* DCDC group CSR: supported voltages in microvolts */
-static const struct regulator_linear_range dcdc_csr_ranges[] = {
+static const struct linear_range dcdc_csr_ranges[] = {
 	REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000),
 	REGULATOR_LINEAR_RANGE(1360000, 51, 55, 20000),
 	REGULATOR_LINEAR_RANGE(900000, 56, 63, 0),
 };
 
 /* DCDC group IOSR1: supported voltages in microvolts */
-static const struct regulator_linear_range dcdc_iosr1_ranges[] = {
+static const struct linear_range dcdc_iosr1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(860000, 2, 51, 10000),
 	REGULATOR_LINEAR_RANGE(1500000, 52, 52, 0),
 	REGULATOR_LINEAR_RANGE(1800000, 53, 53, 0),
@@ -131,7 +131,7 @@ static const struct regulator_linear_range dcdc_iosr1_ranges[] = {
 };
 
 /* DCDC group SDSR1: supported voltages in microvolts */
-static const struct regulator_linear_range dcdc_sdsr1_ranges[] = {
+static const struct linear_range dcdc_sdsr1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000),
 	REGULATOR_LINEAR_RANGE(1340000, 51, 51, 0),
 	REGULATOR_LINEAR_RANGE(900000, 52, 63, 0),
@@ -143,7 +143,7 @@ struct bcm590xx_info {
 	u8 n_voltages;
 	const unsigned int *volt_table;
 	u8 n_linear_ranges;
-	const struct regulator_linear_range *linear_ranges;
+	const struct linear_range *linear_ranges;
 };
 
 #define BCM590XX_REG_TABLE(_name, _table) \

drivers/regulator/bd70528-regulator.c

@@ -20,22 +20,22 @@
 #define BUCK_RAMPRATE_125MV 1
 #define BUCK_RAMP_MAX 250
 
-static const struct regulator_linear_range bd70528_buck1_volts[] = {
+static const struct linear_range bd70528_buck1_volts[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000),
 	REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000),
 };
-static const struct regulator_linear_range bd70528_buck2_volts[] = {
+static const struct linear_range bd70528_buck2_volts[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000),
 	REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000),
 	REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000),
 };
-static const struct regulator_linear_range bd70528_buck3_volts[] = {
+static const struct linear_range bd70528_buck3_volts[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000),
 	REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0),
 };
 
 /* All LDOs have same voltage ranges */
-static const struct regulator_linear_range bd70528_ldo_volts[] = {
+static const struct linear_range bd70528_ldo_volts[] = {
 	REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000),
 	REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000),
 	REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000),

drivers/regulator/bd71828-regulator.c

@@ -65,27 +65,27 @@ static const struct reg_init buck7_inits[] = {
 	},
 };
 
-static const struct regulator_linear_range bd71828_buck1267_volts[] = {
+static const struct linear_range bd71828_buck1267_volts[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0x00, 0xef, 6250),
 	REGULATOR_LINEAR_RANGE(2000000, 0xf0, 0xff, 0),
 };
 
-static const struct regulator_linear_range bd71828_buck3_volts[] = {
+static const struct linear_range bd71828_buck3_volts[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x0f, 50000),
 	REGULATOR_LINEAR_RANGE(2000000, 0x10, 0x1f, 0),
 };
 
-static const struct regulator_linear_range bd71828_buck4_volts[] = {
+static const struct linear_range bd71828_buck4_volts[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0x00, 0x1f, 25000),
 	REGULATOR_LINEAR_RANGE(1800000, 0x20, 0x3f, 0),
 };
 
-static const struct regulator_linear_range bd71828_buck5_volts[] = {
+static const struct linear_range bd71828_buck5_volts[] = {
 	REGULATOR_LINEAR_RANGE(2500000, 0x00, 0x0f, 50000),
 	REGULATOR_LINEAR_RANGE(3300000, 0x10, 0x1f, 0),
 };
 
-static const struct regulator_linear_range bd71828_ldo_volts[] = {
+static const struct linear_range bd71828_ldo_volts[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x31, 50000),
 	REGULATOR_LINEAR_RANGE(3300000, 0x32, 0x3f, 0),
 };

drivers/regulator/bd718x7-regulator.c

@@ -152,7 +152,7 @@ static const struct regulator_ops bd718xx_dvs_buck_regulator_ops = {
  * BD71847 BUCK1/2
  * 0.70 to 1.30V (10mV step)
  */
-static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = {
+static const struct linear_range bd718xx_dvs_buck_volts[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000),
 	REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0),
 };
@@ -163,7 +163,7 @@ static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = {
  * and
  * 0.675 to 1.325 (range 1)
  */
-static const struct regulator_linear_range bd71837_buck5_volts[] = {
+static const struct linear_range bd71837_buck5_volts[] = {
 	/* Ranges when VOLT_SEL bit is 0 */
 	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
 	REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
@@ -185,7 +185,7 @@ static const unsigned int bd71837_buck5_volt_range_sel[] = {
 /*
  * BD71847 BUCK3
  */
-static const struct regulator_linear_range bd71847_buck3_volts[] = {
+static const struct linear_range bd71847_buck3_volts[] = {
 	/* Ranges when VOLT_SEL bits are 00 */
 	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
 	REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
@@ -202,7 +202,7 @@ static const unsigned int bd71847_buck3_volt_range_sel[] = {
 	0x0, 0x0, 0x0, 0x40, 0x80, 0x80, 0x80
 };
 
-static const struct regulator_linear_range bd71847_buck4_volts[] = {
+static const struct linear_range bd71847_buck4_volts[] = {
 	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
 	REGULATOR_LINEAR_RANGE(2600000, 0x00, 0x03, 100000),
 };
@@ -213,7 +213,7 @@ static const unsigned int bd71847_buck4_volt_range_sel[] = { 0x0, 0x40 };
  * BUCK6
  * 3.0V to 3.3V (step 100mV)
  */
-static const struct regulator_linear_range bd71837_buck6_volts[] = {
+static const struct linear_range bd71837_buck6_volts[] = {
 	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
 };
 
@@ -237,7 +237,7 @@ static const unsigned int bd718xx_3rd_nodvs_buck_volts[] = {
  * BUCK8
  * 0.8V to 1.40V (step 10mV)
  */
-static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = {
+static const struct linear_range bd718xx_4th_nodvs_buck_volts[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000),
 };
 
@@ -245,7 +245,7 @@ static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = {
  * LDO1
  * 3.0 to 3.3V (100mV step)
  */
-static const struct regulator_linear_range bd718xx_ldo1_volts[] = {
+static const struct linear_range bd718xx_ldo1_volts[] = {
 	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
 	REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000),
 };
@@ -264,7 +264,7 @@ static const unsigned int ldo_2_volts[] = {
  * LDO3
  * 1.8 to 3.3V (100mV step)
  */
-static const struct regulator_linear_range bd718xx_ldo3_volts[] = {
+static const struct linear_range bd718xx_ldo3_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 };
 
@@ -272,7 +272,7 @@ static const struct regulator_linear_range bd718xx_ldo3_volts[] = {
  * LDO4
  * 0.9 to 1.8V (100mV step)
  */
-static const struct regulator_linear_range bd718xx_ldo4_volts[] = {
+static const struct linear_range bd718xx_ldo4_volts[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
 };
 
@@ -280,7 +280,7 @@ static const struct regulator_linear_range bd718xx_ldo4_volts[] = {
  * LDO5 for BD71837
  * 1.8 to 3.3V (100mV step)
  */
-static const struct regulator_linear_range bd71837_ldo5_volts[] = {
+static const struct linear_range bd71837_ldo5_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 };
 
@@ -288,7 +288,7 @@ static const struct regulator_linear_range bd71837_ldo5_volts[] = {
  * LDO5 for BD71837
  * 1.8 to 3.3V (100mV step)
  */
-static const struct regulator_linear_range bd71847_ldo5_volts[] = {
+static const struct linear_range bd71847_ldo5_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x0F, 100000),
 };
@@ -299,7 +299,7 @@ static const unsigned int bd71847_ldo5_volt_range_sel[] = { 0x0, 0x20 };
  * LDO6
  * 0.9 to 1.8V (100mV step)
  */
-static const struct regulator_linear_range bd718xx_ldo6_volts[] = {
+static const struct linear_range bd718xx_ldo6_volts[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
 };
 
@@ -307,7 +307,7 @@ static const struct regulator_linear_range bd718xx_ldo6_volts[] = {
  * LDO7
  * 1.8 to 3.3V (100mV step)
  */
-static const struct regulator_linear_range bd71837_ldo7_volts[] = {
+static const struct linear_range bd71837_ldo7_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 };
 

drivers/regulator/da903x.c

@@ -248,7 +248,7 @@ static int da9034_set_dvc_voltage_sel(struct regulator_dev *rdev,
 	return ret;
 }
 
-static const struct regulator_linear_range da9034_ldo12_ranges[] = {
+static const struct linear_range da9034_ldo12_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 50000),
 	REGULATOR_LINEAR_RANGE(2700000, 8, 15, 50000),
 };

drivers/regulator/helpers.c

@@ -131,10 +131,11 @@ int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev)
 	unsigned int r_val;
 	int range;
 	unsigned int val;
-	int ret, i;
-	unsigned int voltages_in_range = 0;
+	int ret;
+	unsigned int voltages = 0;
+	const struct linear_range *r = rdev->desc->linear_ranges;
 
-	if (!rdev->desc->linear_ranges)
+	if (!r)
 		return -EINVAL;
 
 	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
@@ -152,11 +153,9 @@ int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev)
 	if (range < 0)
 		return -EINVAL;
 
-	for (i = 0; i < range; i++)
-		voltages_in_range += (rdev->desc->linear_ranges[i].max_sel -
-				     rdev->desc->linear_ranges[i].min_sel) + 1;
+	voltages = linear_range_values_in_range_array(r, range);
 
-	return val + voltages_in_range;
+	return val + voltages;
 }
 EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_pickable_regmap);
 
@@ -179,8 +178,11 @@ int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev,
 	unsigned int voltages_in_range = 0;
 
 	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
-		voltages_in_range = (rdev->desc->linear_ranges[i].max_sel -
-				     rdev->desc->linear_ranges[i].min_sel) + 1;
+		const struct linear_range *r;
+
+		r = &rdev->desc->linear_ranges[i];
+		voltages_in_range = linear_range_values_in_range(r);
+
 		if (sel < voltages_in_range)
 			break;
 		sel -= voltages_in_range;
@@ -405,8 +407,10 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);
 int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
 				       int min_uV, int max_uV)
 {
-	const struct regulator_linear_range *range;
+	const struct linear_range *range;
 	int ret = -EINVAL;
+	unsigned int sel;
+	bool found;
 	int voltage, i;
 
 	if (!rdev->desc->n_linear_ranges) {
@@ -415,35 +419,19 @@ int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
 	}
 
 	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
-		int linear_max_uV;
-
 		range = &rdev->desc->linear_ranges[i];
-		linear_max_uV = range->min_uV +
-			(range->max_sel - range->min_sel) * range->uV_step;
 
-		if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV))
+		ret = linear_range_get_selector_high(range, min_uV, &sel,
+						     &found);
+		if (ret)
 			continue;
-
-		if (min_uV <= range->min_uV)
-			min_uV = range->min_uV;
-
-		/* range->uV_step == 0 means fixed voltage range */
-		if (range->uV_step == 0) {
-			ret = 0;
-		} else {
-			ret = DIV_ROUND_UP(min_uV - range->min_uV,
-					   range->uV_step);
-			if (ret < 0)
-				return ret;
-		}
-
-		ret += range->min_sel;
+		ret = sel;
 
 		/*
 		 * Map back into a voltage to verify we're still in bounds.
 		 * If we are not, then continue checking rest of the ranges.
 		 */
-		voltage = rdev->desc->ops->list_voltage(rdev, ret);
+		voltage = rdev->desc->ops->list_voltage(rdev, sel);
 		if (voltage >= min_uV && voltage <= max_uV)
 			break;
 	}
@@ -468,7 +456,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);
 int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
 						int min_uV, int max_uV)
 {
-	const struct regulator_linear_range *range;
+	const struct linear_range *range;
 	int ret = -EINVAL;
 	int voltage, i;
 	unsigned int selector = 0;
@@ -480,30 +468,25 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
 
 	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
 		int linear_max_uV;
+		bool found;
+		unsigned int sel;
 
 		range = &rdev->desc->linear_ranges[i];
-		linear_max_uV = range->min_uV +
-			(range->max_sel - range->min_sel) * range->uV_step;
+		linear_max_uV = linear_range_get_max_value(range);
 
-		if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV)) {
-			selector += (range->max_sel - range->min_sel + 1);
+		if (!(min_uV <= linear_max_uV && max_uV >= range->min)) {
+			selector += linear_range_values_in_range(range);
 			continue;
 		}
 
-		if (min_uV <= range->min_uV)
-			min_uV = range->min_uV;
-
-		/* range->uV_step == 0 means fixed voltage range */
-		if (range->uV_step == 0) {
-			ret = 0;
-		} else {
-			ret = DIV_ROUND_UP(min_uV - range->min_uV,
-					   range->uV_step);
-			if (ret < 0)
-				return ret;
+		ret = linear_range_get_selector_high(range, min_uV, &sel,
+						     &found);
+		if (ret) {
+			selector += linear_range_values_in_range(range);
+			continue;
 		}
 
-		ret += selector;
+		ret = selector + sel;
 
 		voltage = rdev->desc->ops->list_voltage(rdev, ret);
 
@@ -513,7 +496,7 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
 		 * exit but retry until we have checked all ranges.
 		 */
 		if (voltage < min_uV || voltage > max_uV)
-			selector += (range->max_sel - range->min_sel + 1);
+			selector += linear_range_values_in_range(range);
 		else
 			break;
 	}
@@ -561,7 +544,7 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
 int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
 						 unsigned int selector)
 {
-	const struct regulator_linear_range *range;
+	const struct linear_range *range;
 	int i;
 	unsigned int all_sels = 0;
 
@@ -571,18 +554,28 @@ int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
 	}
 
 	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
-		unsigned int sels_in_range;
+		unsigned int sel_indexes;
 
 		range = &rdev->desc->linear_ranges[i];
 
-		sels_in_range = range->max_sel - range->min_sel;
+		sel_indexes = linear_range_values_in_range(range) - 1;
 
-		if (all_sels + sels_in_range >= selector) {
+		if (all_sels + sel_indexes >= selector) {
 			selector -= all_sels;
-			return range->min_uV + (range->uV_step * selector);
+			/*
+			 * As we see here, pickable ranges work only as
+			 * long as the first selector for each pickable
+			 * range is 0, and the each subsequent range for
+			 * this 'pick' follow immediately at next unused
+			 * selector (Eg. there is no gaps between ranges).
+			 * I think this is fine but it probably should be
+			 * documented. OTOH, whole pickable range stuff
+			 * might benefit from some documentation
+			 */
+			return range->min + (range->step * selector);
 		}
 
-		all_sels += (sels_in_range + 1);
+		all_sels += (sel_indexes + 1);
 	}
 
 	return -EINVAL;
@@ -604,27 +597,18 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range);
 int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
 					     unsigned int selector)
 {
-	const struct regulator_linear_range *range;
-	int i;
-
-	if (!desc->n_linear_ranges) {
-		BUG_ON(!desc->n_linear_ranges);
-		return -EINVAL;
-	}
-
-	for (i = 0; i < desc->n_linear_ranges; i++) {
-		range = &desc->linear_ranges[i];
-
-		if (!(selector >= range->min_sel &&
-		      selector <= range->max_sel))
-			continue;
+	unsigned int val;
+	int ret;
 
-		selector -= range->min_sel;
+	BUG_ON(!desc->n_linear_ranges);
 
-		return range->min_uV + (range->uV_step * selector);
-	}
+	ret = linear_range_get_value_array(desc->linear_ranges,
+					   desc->n_linear_ranges, selector,
+					   &val);
+	if (ret)
+		return ret;
 
-	return -EINVAL;
+	return val;
 }
 EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear_range);
 

drivers/regulator/hi6421-regulator.c

@@ -87,7 +87,7 @@ static const unsigned int ldo_8_voltages[] = {
 };
 
 /* Ranges are sorted in ascending order. */
-static const struct regulator_linear_range ldo_audio_volt_range[] = {
+static const struct linear_range ldo_audio_volt_range[] = {
 	REGULATOR_LINEAR_RANGE(2800000, 0, 3, 50000),
 	REGULATOR_LINEAR_RANGE(3000000, 4, 7, 100000),
 };
@@ -195,7 +195,7 @@ static const struct regulator_ops hi6421_buck345_ops;
  * _id - LDO id name string
  * _match - of match name string
  * n_volt - number of votages available
- * volt_ranges - array of regulator_linear_range
+ * volt_ranges - array of linear_range
  * vstep - voltage increase in each linear step in uV
  * vreg - voltage select register
  * vmask - voltage select mask

drivers/regulator/lochnagar-regulator.c

@@ -36,7 +36,7 @@ static const struct regulator_ops lochnagar_micvdd_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 };
 
-static const struct regulator_linear_range lochnagar_micvdd_ranges[] = {
+static const struct linear_range lochnagar_micvdd_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0,    0xC, 50000),
 	REGULATOR_LINEAR_RANGE(1700000, 0xD, 0x1F, 100000),
 };
@@ -97,7 +97,7 @@ static const struct regulator_ops lochnagar_vddcore_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 };
 
-static const struct regulator_linear_range lochnagar_vddcore_ranges[] = {
+static const struct linear_range lochnagar_vddcore_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0x8, 0x41, 12500),
 };
 

drivers/regulator/lp873x-regulator.c

@@ -54,14 +54,14 @@ struct lp873x_regulator {
 
 static const struct lp873x_regulator regulators[];
 
-static const struct regulator_linear_range buck0_buck1_ranges[] = {
+static const struct linear_range buck0_buck1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0),
 	REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000),
 	REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
 	REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
 };
 
-static const struct regulator_linear_range ldo0_ldo1_ranges[] = {
+static const struct linear_range ldo0_ldo1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000),
 };
 

drivers/regulator/lp87565-regulator.c

@@ -46,7 +46,7 @@ struct lp87565_regulator {
 
 static const struct lp87565_regulator regulators[];
 
-static const struct regulator_linear_range buck0_1_2_3_ranges[] = {
+static const struct linear_range buck0_1_2_3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0xA, 0x17, 10000),
 	REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
 	REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),

drivers/regulator/lp8788-buck.c

@@ -92,7 +92,7 @@ struct lp8788_buck {
 };
 
 /* BUCK 1 ~ 4 voltage ranges */
-static const struct regulator_linear_range buck_volt_ranges[] = {
+static const struct linear_range buck_volt_ranges[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0, 0),
 	REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000),
 };

drivers/regulator/max77650-regulator.c

@@ -49,7 +49,7 @@ static const unsigned int max77651_sbb1_volt_range_sel[] = {
 	0x0, 0x1, 0x2, 0x3
 };
 
-static const struct regulator_linear_range max77651_sbb1_volt_ranges[] = {
+static const struct linear_range max77651_sbb1_volt_ranges[] = {
 	/* range index 0 */
 	REGULATOR_LINEAR_RANGE(2400000, 0x00, 0x0f, 50000),
 	/* range index 1 */

drivers/regulator/mcp16502.c

@@ -391,11 +391,11 @@ static const struct of_device_id mcp16502_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, mcp16502_ids);
 
-static const struct regulator_linear_range b1l12_ranges[] = {
+static const struct linear_range b1l12_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000),
 };
 
-static const struct regulator_linear_range b234_ranges[] = {
+static const struct linear_range b234_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000),
 };
 

drivers/regulator/mp8859.c

@@ -73,7 +73,7 @@ static int mp8859_get_voltage_sel(struct regulator_dev *rdev)
 	return val;
 }
 
-static const struct regulator_linear_range mp8859_dcdc_ranges[] = {
+static const struct linear_range mp8859_dcdc_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, VOL_MIN_IDX, VOL_MAX_IDX, 10000),
 };
 

drivers/regulator/mt6323-regulator.c

@@ -102,15 +102,15 @@ struct mt6323_regulator_info {
 	.modeset_mask = _modeset_mask,					\
 }
 
-static const struct regulator_linear_range buck_volt_range1[] = {
+static const struct linear_range buck_volt_range1[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
 };
 
-static const struct regulator_linear_range buck_volt_range2[] = {
+static const struct linear_range buck_volt_range2[] = {
 	REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500),
 };
 
-static const struct regulator_linear_range buck_volt_range3[] = {
+static const struct linear_range buck_volt_range3[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
 };
 

drivers/regulator/mt6358-regulator.c

@@ -137,19 +137,19 @@ struct mt6358_regulator_info {
 	.qi = BIT(15),							\
 }
 
-static const struct regulator_linear_range buck_volt_range1[] = {
+static const struct linear_range buck_volt_range1[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
 };
 
-static const struct regulator_linear_range buck_volt_range2[] = {
+static const struct linear_range buck_volt_range2[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 12500),
 };
 
-static const struct regulator_linear_range buck_volt_range3[] = {
+static const struct linear_range buck_volt_range3[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
 };
 
-static const struct regulator_linear_range buck_volt_range4[] = {
+static const struct linear_range buck_volt_range4[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0, 0x7f, 12500),
 };
 

drivers/regulator/mt6380-regulator.c

@@ -152,15 +152,15 @@ struct mt6380_regulator_info {
 	.modeset_mask = _modeset_mask,					\
 }
 
-static const struct regulator_linear_range buck_volt_range1[] = {
+static const struct linear_range buck_volt_range1[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250),
 };
 
-static const struct regulator_linear_range buck_volt_range2[] = {
+static const struct linear_range buck_volt_range2[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250),
 };
 
-static const struct regulator_linear_range buck_volt_range3[] = {
+static const struct linear_range buck_volt_range3[] = {
 	REGULATOR_LINEAR_RANGE(1200000, 0, 0x3c, 25000),
 };
 

drivers/regulator/mt6397-regulator.c

@@ -102,15 +102,15 @@ struct mt6397_regulator_info {
 	.qi = BIT(15),							\
 }
 
-static const struct regulator_linear_range buck_volt_range1[] = {
+static const struct linear_range buck_volt_range1[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
 };
 
-static const struct regulator_linear_range buck_volt_range2[] = {
+static const struct linear_range buck_volt_range2[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0, 0x7f, 6250),
 };
 
-static const struct regulator_linear_range buck_volt_range3[] = {
+static const struct linear_range buck_volt_range3[] = {
 	REGULATOR_LINEAR_RANGE(1500000, 0, 0x1f, 20000),
 };
 

drivers/regulator/palmas-regulator.c

@@ -22,14 +22,14 @@
 #include <linux/of_platform.h>
 #include <linux/regulator/of_regulator.h>
 
-static const struct regulator_linear_range smps_low_ranges[] = {
+static const struct linear_range smps_low_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(500000, 0x1, 0x6, 0),
 	REGULATOR_LINEAR_RANGE(510000, 0x7, 0x79, 10000),
 	REGULATOR_LINEAR_RANGE(1650000, 0x7A, 0x7f, 0),
 };
 
-static const struct regulator_linear_range smps_high_ranges[] = {
+static const struct linear_range smps_high_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x6, 0),
 	REGULATOR_LINEAR_RANGE(1020000, 0x7, 0x79, 20000),

drivers/regulator/qcom-rpmh-regulator.c

@@ -86,7 +86,7 @@ enum rpmh_regulator_type {
 struct rpmh_vreg_hw_data {
 	enum rpmh_regulator_type		regulator_type;
 	const struct regulator_ops		*ops;
-	const struct regulator_linear_range	voltage_range;
+	const struct linear_range	voltage_range;
 	int					n_voltages;
 	int					hpm_min_load_uA;
 	const int				*pmic_mode_map;

drivers/regulator/qcom_rpm-regulator.c

@@ -148,41 +148,41 @@ static const struct rpm_reg_parts rpm8960_ncp_parts = {
 /*
  * Physically available PMIC regulator voltage ranges
  */
-static const struct regulator_linear_range pldo_ranges[] = {
+static const struct linear_range pldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 750000,   0,  59, 12500),
 	REGULATOR_LINEAR_RANGE(1500000,  60, 123, 25000),
 	REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
 };
 
-static const struct regulator_linear_range nldo_ranges[] = {
+static const struct linear_range nldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 750000,   0,  63, 12500),
 };
 
-static const struct regulator_linear_range nldo1200_ranges[] = {
+static const struct linear_range nldo1200_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 375000,   0,  59,  6250),
 	REGULATOR_LINEAR_RANGE( 750000,  60, 123, 12500),
 };
 
-static const struct regulator_linear_range smps_ranges[] = {
+static const struct linear_range smps_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 375000,   0,  29, 12500),
 	REGULATOR_LINEAR_RANGE( 750000,  30,  89, 12500),
 	REGULATOR_LINEAR_RANGE(1500000,  90, 153, 25000),
 };
 
-static const struct regulator_linear_range ftsmps_ranges[] = {
+static const struct linear_range ftsmps_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 350000,   0,   6, 50000),
 	REGULATOR_LINEAR_RANGE( 700000,   7,  63, 12500),
 	REGULATOR_LINEAR_RANGE(1500000,  64, 100, 50000),
 };
 
-static const struct regulator_linear_range smb208_ranges[] = {
+static const struct linear_range smb208_ranges[] = {
 	REGULATOR_LINEAR_RANGE( 375000,   0,  29, 12500),
 	REGULATOR_LINEAR_RANGE( 750000,  30,  89, 12500),
 	REGULATOR_LINEAR_RANGE(1500000,  90, 153, 25000),
 	REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000),
 };
 
-static const struct regulator_linear_range ncp_ranges[] = {
+static const struct linear_range ncp_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1500000,   0,  31, 50000),
 };
 

drivers/regulator/rk808-regulator.c

@@ -165,14 +165,14 @@ static const int rk808_buck_config_regs[] = {
 	RK808_BUCK4_CONFIG_REG,
 };
 
-static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
+static const struct linear_range rk808_ldo3_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
 	REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
 };
 
 #define RK809_BUCK5_SEL_CNT		(8)
 
-static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = {
+static const struct linear_range rk809_buck5_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1500000, 0, 0, 0),
 	REGULATOR_LINEAR_RANGE(1800000, 1, 3, 200000),
 	REGULATOR_LINEAR_RANGE(2800000, 4, 5, 200000),
@@ -201,14 +201,14 @@ static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = {
 #define RK817_BUCK1_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK1_SEL1 + 1)
 #define RK817_BUCK3_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK3_SEL1 + 1)
 
-static const struct regulator_linear_range rk817_buck1_voltage_ranges[] = {
+static const struct linear_range rk817_buck1_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
 			       RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
 	REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
 			       RK817_BUCK1_SEL_CNT, RK817_BUCK1_STP1),
 };
 
-static const struct regulator_linear_range rk817_buck3_voltage_ranges[] = {
+static const struct linear_range rk817_buck3_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
 			       RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
 	REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
@@ -665,7 +665,7 @@ static const struct regulator_ops rk808_switch_ops = {
 	.set_suspend_disable	= rk808_set_suspend_disable,
 };
 
-static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = {
+static const struct linear_range rk805_buck_1_2_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500),
 	REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000),
 	REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),

drivers/regulator/s2mps11.c

@@ -749,37 +749,37 @@ static const struct regulator_ops s2mps15_reg_buck_ops = {
 }
 
 /* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges1[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
 };
 
 /* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges2[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
 };
 
 /* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges3[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
 };
 
 /* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges4[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000),
 };
 
 /* voltage range for s2mps15 LDO 1 */
-static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
+static const struct linear_range s2mps15_ldo_voltage_ranges5[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
 };
 
 /* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
-static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
+static const struct linear_range s2mps15_buck_voltage_ranges1[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250),
 };
 
 /* voltage range for s2mps15 BUCK 8, 9 and 10 */
-static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
+static const struct linear_range s2mps15_buck_voltage_ranges2[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500),
 };
 

drivers/regulator/sky81452-regulator.c

@@ -32,7 +32,7 @@ static const struct regulator_ops sky81452_reg_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
-static const struct regulator_linear_range sky81452_reg_ranges[] = {
+static const struct linear_range sky81452_reg_ranges[] = {
 	REGULATOR_LINEAR_RANGE(4500000, 0, 14, 250000),
 	REGULATOR_LINEAR_RANGE(9000000, 15, 31, 1000000),
 };

drivers/regulator/stpmic1_regulator.c

@@ -57,13 +57,13 @@ enum {
 /* Ramp delay worst case is (2250uV/uS) */
 #define PMIC_RAMP_DELAY 2200
 
-static const struct regulator_linear_range buck1_ranges[] = {
+static const struct linear_range buck1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(725000, 0, 4, 0),
 	REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000),
 	REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0),
 };
 
-static const struct regulator_linear_range buck2_ranges[] = {
+static const struct linear_range buck2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0),
 	REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0),
 	REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0),
@@ -77,7 +77,7 @@ static const struct regulator_linear_range buck2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0),
 };
 
-static const struct regulator_linear_range buck3_ranges[] = {
+static const struct linear_range buck3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0),
 	REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0),
 	REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0),
@@ -87,7 +87,7 @@ static const struct regulator_linear_range buck3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0),
 };
 
-static const struct regulator_linear_range buck4_ranges[] = {
+static const struct linear_range buck4_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000),
 	REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
 	REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
@@ -97,19 +97,19 @@ static const struct regulator_linear_range buck4_ranges[] = {
 	REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0),
 };
 
-static const struct regulator_linear_range ldo1_ranges[] = {
+static const struct linear_range ldo1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
 	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
 	REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
 };
 
-static const struct regulator_linear_range ldo2_ranges[] = {
+static const struct linear_range ldo2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
 	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
 	REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
 };
 
-static const struct regulator_linear_range ldo3_ranges[] = {
+static const struct linear_range ldo3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
 	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
 	REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
@@ -117,13 +117,13 @@ static const struct regulator_linear_range ldo3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(500000, 31, 31, 0),
 };
 
-static const struct regulator_linear_range ldo5_ranges[] = {
+static const struct linear_range ldo5_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
 	REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000),
 	REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0),
 };
 
-static const struct regulator_linear_range ldo6_ranges[] = {
+static const struct linear_range ldo6_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000),
 	REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
 };

drivers/regulator/tps65086-regulator.c

@@ -71,23 +71,23 @@ struct tps65086_regulator {
 	unsigned int decay_mask;
 };
 
-static const struct regulator_linear_range tps65086_10mv_ranges[] = {
+static const struct linear_range tps65086_10mv_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(410000, 0x1, 0x7F, 10000),
 };
 
-static const struct regulator_linear_range tps65086_buck126_25mv_ranges[] = {
+static const struct linear_range tps65086_buck126_25mv_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x18, 0),
 	REGULATOR_LINEAR_RANGE(1025000, 0x19, 0x7F, 25000),
 };
 
-static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = {
+static const struct linear_range tps65086_buck345_25mv_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(425000, 0x1, 0x7F, 25000),
 };
 
-static const struct regulator_linear_range tps65086_ldoa1_ranges[] = {
+static const struct linear_range tps65086_ldoa1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0),
 	REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000),
 	REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xB, 100000),
@@ -95,7 +95,7 @@ static const struct regulator_linear_range tps65086_ldoa1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0),
 };
 
-static const struct regulator_linear_range tps65086_ldoa23_ranges[] = {
+static const struct linear_range tps65086_ldoa23_ranges[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0x0, 0xD, 50000),
 	REGULATOR_LINEAR_RANGE(1400000, 0xE, 0xF, 100000),
 };

drivers/regulator/tps65217-regulator.c

@@ -56,14 +56,14 @@ static const unsigned int LDO1_VSEL_table[] = {
 	2800000, 3000000, 3100000, 3300000,
 };
 
-static const struct regulator_linear_range tps65217_uv1_ranges[] = {
+static const struct linear_range tps65217_uv1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 24, 25000),
 	REGULATOR_LINEAR_RANGE(1550000, 25, 52, 50000),
 	REGULATOR_LINEAR_RANGE(3000000, 53, 55, 100000),
 	REGULATOR_LINEAR_RANGE(3300000, 56, 63, 0),
 };
 
-static const struct regulator_linear_range tps65217_uv2_ranges[] = {
+static const struct linear_range tps65217_uv2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1500000, 0, 8, 50000),
 	REGULATOR_LINEAR_RANGE(2000000, 9, 13, 100000),
 	REGULATOR_LINEAR_RANGE(2450000, 14, 31, 50000),

drivers/regulator/tps65218-regulator.c

@@ -56,17 +56,17 @@
 		.bypass_mask	= _sm,				\
 	}							\
 
-static const struct regulator_linear_range dcdc1_dcdc2_ranges[] = {
+static const struct linear_range dcdc1_dcdc2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(850000, 0x0, 0x32, 10000),
 	REGULATOR_LINEAR_RANGE(1375000, 0x33, 0x3f, 25000),
 };
 
-static const struct regulator_linear_range ldo1_dcdc3_ranges[] = {
+static const struct linear_range ldo1_dcdc3_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0x0, 0x1a, 25000),
 	REGULATOR_LINEAR_RANGE(1600000, 0x1b, 0x3f, 50000),
 };
 
-static const struct regulator_linear_range dcdc4_ranges[] = {
+static const struct linear_range dcdc4_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1175000, 0x0, 0xf, 25000),
 	REGULATOR_LINEAR_RANGE(1600000, 0x10, 0x34, 50000),
 };

drivers/regulator/tps65912-regulator.c

@@ -46,11 +46,11 @@ enum tps65912_regulators { DCDC1, DCDC2, DCDC3, DCDC4, LDO1, LDO2, LDO3,
 		.n_linear_ranges	= ARRAY_SIZE(_lr),		\
 	}
 
-static const struct regulator_linear_range tps65912_dcdc_ranges[] = {
+static const struct linear_range tps65912_dcdc_ranges[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0x0, 0x3f, 50000),
 };
 
-static const struct regulator_linear_range tps65912_ldo_ranges[] = {
+static const struct linear_range tps65912_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 25000),
 	REGULATOR_LINEAR_RANGE(1650000, 0x21, 0x3c, 50000),
 	REGULATOR_LINEAR_RANGE(3100000, 0x3d, 0x3f, 100000),

drivers/regulator/twl-regulator.c

@@ -360,12 +360,12 @@ static const u16 VINTANA2_VSEL_table[] = {
 };
 
 /* 600mV to 1450mV in 12.5 mV steps */
-static const struct regulator_linear_range VDD1_ranges[] = {
+static const struct linear_range VDD1_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
 };
 
 /* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
-static const struct regulator_linear_range VDD2_ranges[] = {
+static const struct linear_range VDD2_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
 	REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
 };

drivers/regulator/twl6030-regulator.c

@@ -495,7 +495,7 @@ static const struct regulator_ops twlsmps_ops = {
 };
 
 /*----------------------------------------------------------------------*/
-static const struct regulator_linear_range twl6030ldo_linear_range[] = {
+static const struct linear_range twl6030ldo_linear_range[] = {
 	REGULATOR_LINEAR_RANGE(0, 0, 0, 0),
 	REGULATOR_LINEAR_RANGE(1000000, 1, 24, 100000),
 	REGULATOR_LINEAR_RANGE(2750000, 31, 31, 0),

drivers/regulator/wm831x-dcdc.c

@@ -204,7 +204,7 @@ static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
  * BUCKV specifics
  */
 
-static const struct regulator_linear_range wm831x_buckv_ranges[] = {
+static const struct linear_range wm831x_buckv_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0, 0x7, 0),
 	REGULATOR_LINEAR_RANGE(600000, 0x8, 0x68, 12500),
 };

drivers/regulator/wm831x-ldo.c

@@ -59,7 +59,7 @@ static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data)
  * General purpose LDOs
  */
 
-static const struct regulator_linear_range wm831x_gp_ldo_ranges[] = {
+static const struct linear_range wm831x_gp_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000),
 	REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000),
 };
@@ -312,7 +312,7 @@ static struct platform_driver wm831x_gp_ldo_driver = {
  * Analogue LDOs
  */
 
-static const struct regulator_linear_range wm831x_aldo_ranges[] = {
+static const struct linear_range wm831x_aldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1000000, 0, 12, 50000),
 	REGULATOR_LINEAR_RANGE(1700000, 13, 31, 100000),
 };

drivers/regulator/wm8350-regulator.c

@@ -470,7 +470,7 @@ static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev,
 	return 0;
 }
 
-static const struct regulator_linear_range wm8350_ldo_ranges[] = {
+static const struct linear_range wm8350_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 15, 50000),
 	REGULATOR_LINEAR_RANGE(1800000, 16, 31, 100000),
 };

drivers/regulator/wm8400-regulator.c

@@ -13,7 +13,7 @@
 #include <linux/regulator/driver.h>
 #include <linux/mfd/wm8400-private.h>
 
-static const struct regulator_linear_range wm8400_ldo_ranges[] = {
+static const struct linear_range wm8400_ldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000),
 	REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000),
 };

include/linux/regulator/driver.h

@@ -13,6 +13,7 @@
 #define __LINUX_REGULATOR_DRIVER_H_
 
 #include <linux/device.h>
+#include <linux/linear_range.h>
 #include <linux/notifier.h>
 #include <linux/regulator/consumer.h>
 #include <linux/ww_mutex.h>
@@ -39,31 +40,13 @@ enum regulator_status {
 	REGULATOR_STATUS_UNDEFINED,
 };
 
-/**
- * struct regulator_linear_range - specify linear voltage ranges
- *
- * Specify a range of voltages for regulator_map_linear_range() and
- * regulator_list_linear_range().
- *
- * @min_uV:  Lowest voltage in range
- * @min_sel: Lowest selector for range
- * @max_sel: Highest selector for range
- * @uV_step: Step size
- */
-struct regulator_linear_range {
-	unsigned int min_uV;
-	unsigned int min_sel;
-	unsigned int max_sel;
-	unsigned int uV_step;
-};
-
-/* Initialize struct regulator_linear_range */
+/* Initialize struct linear_range for regulators */
 #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV)	\
 {									\
-	.min_uV		= _min_uV,					\
+	.min		= _min_uV,					\
 	.min_sel	= _min_sel,					\
 	.max_sel	= _max_sel,					\
-	.uV_step	= _step_uV,					\
+	.step		= _step_uV,					\
 }
 
 /**
@@ -348,7 +331,7 @@ struct regulator_desc {
 	unsigned int ramp_delay;
 	int min_dropout_uV;
 
-	const struct regulator_linear_range *linear_ranges;
+	const struct linear_range *linear_ranges;
 	const unsigned int *linear_range_selectors;
 
 	int n_linear_ranges;